similar to: Network\Snom phone oddity

Has anyone got this annoying sidecar to illuminate when users are on the phone? In my function key settings I have: Context: Active Type: Extension Number: <sip:4000@serve.address.com;user=phone> (4000 is the extension I want to see/dial on the key). I can press the key and it will dial the extension, it just won't illuminate when the user is on the phone or on DND Since I have

Hello Although not stictly a asterisk issue, any help would be apreciated. Firstly a few notes on the snom 360, which I have had on a test bed for the last week. Its a great phone, with a good user interface, both physically and its web based one. At its lastest firmware it does have a few quirks, with regards to the way it handles usernames and passwords on the physical interface. These have

Anyone have a Snom they're happy with? How did you manage that? :) I have a system of: Asterisk 1.2.3 2 Wildcard TDM400P Rev I and E/F 1 Snom 360 + sidecar ~15 Sipura/Linsys SPA-841 ~15 Grandstream 101 Everything (currently) is on the same network, not a router to be seen between any two. Also everything, except the snom, is working sweetly. The main problem is ECHO.. awful echo and

I don't know everything that's going on as someone else has been working on the project, but it hasn't really been going anywhere, so I had some questions. We've got some Snom 320s with Asterisk 1.2.9.1 (I believe). All was well (with a previous release), but the phones started to get real choppy. We are also running a softphone at this location and it was fine. The SIP qualify

Hi, I've just installed asterisk 1.2.1 on my openwrt distro ( I own a WRT54GL by Linksys ) . No problem by now, but I can see that my 3 snom 320, once they started they send subscriptions to asterisk, and I can see that running: sip show subscriptions But, after one hour about, OR when I do asterisk reload , asterisk losts all th snom subscriptions. Someone can help me please? Thanks

Hi all, One of my users reports frequently hearing echo on her Snom 360 phone, even while talking to other Snom phones (via Asterisk) on the same LAN (i.e., all-digital low-latency connection). I can never reproduce it though, and swapping the phone didn't help. Has anyone else seen "mystery echo" on Snom phones? Any suggestions for debugging? On my own Snom 360, I sometimes

Hello All, I apologize for the slightly off-topic question, but I'm sure that the people best acquainted with the issue would be hanging around here. We recently deployed several Linksys POE switches for some smaller customers (10-24 station) and appear to be suffering from intermittent lock-ups of the SNOM phones attached. Obviously we are running Asterisk for the gateway, but I was

Has anyone ever encountered an echo on the IP phone side of a call? It is an echo of the user's own voice. I believe that no one else in the office is experiencing this problem. The phone itself is a Snom 320. I've asked Snom for assistance since my source no longer carries Snom, but unlike previous times they've been slow to respond. ----- Mike Hammett Intelligent Computing

I recently got a SNOM 360 and have been trying to get the extension lights to work. I can see the subscriptions with sip show subscriptions but I don't see any notifies when a call is made. I must be missing something because I've tried looking to see if anyone else has had this problem but the only solutions I've seen have been to put hints in and I have those. Any suggestions?

Is anyone using the SNOM 360 as a reception console with Asterisk? We are trying to have the ability to view whether an extension is on or off hook, or ringing with the Snom, which seems to work fine. The issue is that we are having difficulty picking up calls and transferring. Anyone have experience / insight? Darrell S. Long Director of Technology BestWeb Corporation Phone 877-777-2932

Good day all I have asterisk on a box with one network card I have a 2 companies setup on the system. To keep all apart I binded a different ip to the interface,i,o,w eth0 192.168.0.254 and eth0:1 192.168.1.254 And in sip.conf I took the bind setting out So each company's phones are on a different ip range,and all worked well So we decide to pull the snom190 out and exchange it with a snom360

Long story short... Snom's ... Retrieve button... works when MWI is *NOT* lit but does *NOT* work when it is lit. Any advice Useragent : snom360/6.5.2 Function: F_RETRIEVE [root@pbx ~]# asterisk -rx "show version" Asterisk 1.2.13 built by root @ pbx on a i686 running Linux on 2006-11-17 16:35:22 UTC [gateway] exten => 201,hint,SIP/201 exten =>

A client of mine has a Snom 320. Usually when he comes in each morning, it is asking him for a password. A power cycle brings it back to normal operation. How do I troubleshoot this further? --Mike -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070221/0e4d3ab8/attachment.htm

Some of you might already know that we are releasing a new phone, snom 360. To make the phone well-known and stable, we have made a soft phone version out of it and offer it for trial or private use for free (for more details, see the license conditions). There are only few limitations to the phone. First of all, the audio subsystem will work only work with an acceptable quality if you are using

SNOM phones can be configured using files on a TFTP server. On Thu, Apr 9, 2015 at 11:14 AM, jg <webaccounts173 at jgoettgens.de> wrote: > > Does anyone know how to program Snom phones using a Mac addresses like > what is done with the Ciscos. I have about 50 extensions to be programmed > and I am hoping there is a way on Asterisk to program extensions on the > snom

Hi I am trying to get a SNOM 360 to monitor other extensions i.e. when someone makes a call to/from another extension, one of the LED's on the SNOM 360 will change state. I am using 1.0.9/bristuff-8l. I have 2 extensions - 2001 is a SNOM 190, 2002 is a 360 - both are running the latest firmware. (3.60i for 190, 4.0 for 360). I have read all the relevant articles on the wiki on

We're deploying an asterisk-based phone system at all of our branch offices in an effort to eliminate long-distance costs incurred from the constant branch to branch calls. We're using the Snom 300's at all offices for the desk phones and X100P cards to interface to 2 analog lines. I'm having a problem tuning all the echo out of the system. So far two branches are using the

Hi, I`m not actually asking for a comparaison between the two, I have one on hand and will make up my own mind. But I can't find much info on whether the Snom (370 to be exact) accepts FTP provisioning like the Polycom (but few others) do. Any Snom user can answer this one for me? Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I want to pick up a call with the snom's programmable buttons(snom190 -SIP 3.60x, snom360-SIP 4.1) with asterisk server (v 1.2.0), I tried with the option 'Destination' and when the incoming call arrive to another snom phone the button blinking. In this way I can only pick down it pressing the blinking button. The solution is call the *8 or parcking the call but my pbroblem

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> <small><font face="Helvetica, Arial, sans-serif">Hello,<br> <br> I have a question concerning SNOM M9 base station.<br> <br> If my customer places a SNOM M9 base