similar to: Wanpipe 2.3.4-2 + kernel 2.6.19 = problems

Hi, I'm trying to install asterisk(v1.2.22) with FreepBX(v2.2.3) with a 4-Port FXO Sangoma card A200. I'm using Fedora 7 (x86_64) kernel version 2.6.22.1-27.fc7, but i'm having these errors: $ ztcfg -vvvv Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

LD [M] /root/wanpipe/patches/kdrivers/wanec/wanec.o Building modules, stage 2. MODPOST *** Warning: "register_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! *** Warning: "unregister_wanec_iface" [/root/wanpipe/patches/kdrivers/wanec/wanec.ko] undefined! CC /root/wanpipe/patches/kdrivers/wanec/wanec.mod.o LD [M]

Thanks for replying. It's there, /usr/src/zaptel and it's valid. The script checks for its existence before compiling. The only thing that's unusual about this zaptel is that it is patched to support KB2 echo can. Gavin: Thanks, already cc'd Sangoma support. Hope they are working today! -----Original Message----- From: Eric "ManxPower" Wieling

Sangoma support did something and the driver is there. Rebooting now with the new card. Hold me, I'm scared. -----Original Message----- From: Colin Anderson [mailto:ColinA@landmarkmasterbuilder.com] Sent: Friday, December 22, 2006 10:09 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Sangoma Wanpipe 2.3.4-3 compilation fails un der FC2

Newest wanpipe (3.3.16) beta drivers do not compile against dahdi-linux 2.2.0-rc2 which is what you get when you get dahdi-linux-current.tar.gz Anyone have a workaround or patch? Error below ==================== Building modules, stage 2. MODPOST CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M] /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.ko make[1]:

I'm trying to get my Sangoma B600 working with Asterisk 1.6.1 and DAHDI 2.2. I've tried running ./Setup dahdi (and with --64-bit_4GB flag, running amd64) and the compile fails with this for many versions of the driver (incl. 3.3.16, 3.3.16.22, and 3.4.1): Building modules, stage 2. MODPOST 1 modules CC /usr/src/wanpipe-3.3.16/patches/kdrivers/wanec/wanec.mod.o LD [M]

I'm trying to install wanpipe on my new 2.6.21-2-amd64 core 2 duo machine (Debian's amd64 works with EMT64 too) to run Asterisk. I'm getting compilation errors when trying to install the wanpipe utilities. We are intending to use a Sangoma A102 card for ISDN30 in the UK. I've tried both the current stable 2.3.4-10 release and the new wanpipe-3.1.3 beta release of wanpipe. The

Trying to install wanpipe 3.5.18. No errors during compile. But when I reach the point where wanpipe and dahdi_cfg is started, I encountered an error. Starting WAN Router... Loading WAN drivers: wanpipe done. Starting up device: wanpipe1 wanconfig: WAN device wanpipe1 driver load failed !! : ioctl(wanpipe1,ROUTER_SETUP) failed: : 22 - Invalid

Hi everybody! I'm triying to install a Sangoma A200-R FXO card on a Debian Linux 5 (Lenny), 2.6.26 kernel. To install wanpipe driver I type: WANPIPE_FOLDER# ./Setup install Everything seems to be ok. There are no broken dependencies and the hardware is well detected, even zaptel is recompiled with no errors, but at the time to compile wanpipe I'm getting this error message:

Hi, I learned about shorewall a few days ago and am quite impressed with how easy it was to create a powerful firewall. I set up a test system with a cable modem and it worked flawlessly. I''m going to be building a Router/Firewall for a new T1 that will be using a Sangoma WANpipe card w/ integrated CSU/DSU to connect to a T1. Has anybody done this yet, or do you know if it''s

Hello All; Wanpipe is working only with sangoma cards so it does not work with digium cards? Also, who is better: to have echo canceler built in with the hardware or using olsec? Regards Bilal

Hi: I install A102 sangoma's card and connect E1 link it now for configuring wanpipe which one should I select for dial plan context:from pstn?or from internal? Best regards. --------------------------------- Be a better Globetrotter. Get better travel answers from someone who knows. Yahoo! Answers - Check it out. -------------- next part -------------- An HTML attachment was

Hi all, I have tried to install Wanpipe 7.0.20 in a fresh-installed Debian 8.5 (Jessie) server, but when I reach to the point where I have to enter the Linux Headers directory *(installed in default with ?apt-get install linux-headers-$(uname -r)?)*, I get an error, the package refuses to compile and installation aborts. If I try the same process with Debian 7 (Wheezy), installation works just

Hi listers! Have a problem with distortion in some analog lines. When some call comes in from PSTN the sound is really distorte, nothing can be understanded, but Internal calls work ok. Funny thing is that when I start/stop asterisk,dahdi, and wanrouter services eveything goes fine again. This is happening every week or so. I'm using asterisk 1.4.36, dahdi linux 2.2.0.2 and wanpipe 3.4.9

Hi: I downloaded klibc-1.5.17 and try to cross-compiled it for MIPS. Got following errors: usr/klibc/exit.o: In function `exit': exit.c:(.text+0x40): undefined reference to `_exit' usr/klibc/execl.o: In function `execl': execl.c:(.text+0x80): undefined reference to `execve' usr/klibc/execle.o: In function `execle': execle.c:(.text+0x84): undefined reference to `execve

Hi, I migrated from asterisk 1.6 to 11.3. The Server has a Sangoma A104 quadPri card installed. OS is a fresh installed Ubuntu 12.04 64bit libpri, dahdi etc. all latest releases.. Sangoma says... driver is compatible with ANY asterisk version... I tried driver 3.5.8... Setup ended with error. I tried (latest) driver 7.0.1 Setup went through, Asterisk is showing dahdi channels... all fine....

Hi all, I am having a very strange problem. I am terminating a PRI (5ESS switch type, national plan, 23B+1D (24)) into a Sangoma A104 and am not able to produce any audio heard on the PSTN end of the call. Not sure what's wrong - the card worked before under a Trixbox setup. I'm running kernel 2.6.19 (tried 2.6.24.3 but had to downgrade as wanpipe stuff would not compile), zaptel

Hey! I am installing Sangoma A102D wanpipe driver and i got following error. what is this ? why dir isn't there ? wanpipe-3.5.16 # make dahdi DAHDI_DIR=/usr/src/dahdi wanpipe-3.5.16 # make install ....Send .... .... Installing Wanpipe Firmware update utility in /etc/wanpipe/util/wan_aftup install -D wan_aftup /usr/sbin/wan_aftup install -d /etc/wanpipe/util/wan_aftup/scripts install:

Hello, there has been a post to this list somewhere arount april which said that it is possible to use a Sangoma BRI A500 card with zaptel and asterisk bristuff. That is, without sangoma_brid and sangoma_mgd daemons and without woomera channels. Could anybody give me a short hint how to configure this? I tried wanpipe-driver + zaptel + asterisk-bristuffed, but I couldn't get zaptel to