similar to: Rt db lookup

Does anyone know what triggers the 7970 to update its config? I was able to get it to update to SIP, but the config I used initially won't go away. I am making small changes to the SEPxxx.cnf.xml file and rebooting the phone, the phone is downloading the (TFTP) new config file, but I don't see any change on the phone itself. I've looked at the VersionStamp and incremented that, but

How does one answer more than 100% of the calls in less than 60 seconds? techsupp has 0 calls (max 20) in 'leastrecent' strategy (104s holdtime), W:0, C:3, A:2, SL:166.7% within 60s

Anyone out there have a functional DUNDi configuration using SIP for the inter-Asterisk transport? I've gotten it to work with IAX2, but if I change it to SIP it does not pass the call over even though it knows where to send it. Thanks. The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally

Does anyone have any information on how to use DUNDi precaching? Mark Spencer made a post 2 years ago where he hinted it may be possible to configure DUNDi such that you could centralise your DUNDi registration info by using precaching, instead of having each DUNDi peer meshed with every other one... http://lists.digium.com/pipermail/dundi/2004-October/000189.html However, it seems that no

Pardon my ignorance but I understand that DUNDi lookups (*CLI> dundi lookup xxx at yyy) reveal if a given extension is "served" by some host, ie. if it's present in its dialplan. It does not say if it's registered or not. Is this correct? ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home

You are reading the instructions for the STABLE 1.0 version of asterisk and are using the CVS version. Goto the wiki and read the instructions for RealTime. -Matthew ----- Original Message ----- From: "Muhammad Rizwan Khan" <rizwan@advcomm.net> To: <Asterisk-Dev@lists.digium.com> Sent: Wednesday, January 05, 2005 12:42 PM Subject: [Asterisk-Dev] Asterisk with MySQL >

All, I made some progress, but it seems the further I go with clustering the harder things get. Hmmm, I guess if it were easy, it would be documented...... Anyhow, I have 1 * server as the DUNDi peering master with a ttl=1. The only function of this server is to lookup where other sip peers are registered and forward that info on to the requesting * server. I have 4 * servers accepting

> -----Original Message----- > From: Watkins, Bradley [mailto:Bradley.Watkins@compuware.com] > Sent: Thursday, June 15, 2006 10:36 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] DUNDi Not Able to > HandleComplexFailoverSituations > > > Is it possible for you to explain in more detail the > situation involved.

I recently began using the curl cmd to do an external callerid lookup on my own customer database. I've noticed certain lookups will cause a crash and not show anything in the messages file or the console. The curl command is connecting to an external webserver which has a oracle db connection. The file its hitting is PHP and does a very simply lookup showing the text like "C1234 Bobs

Hi, I'm having difficulties with using DUNDi between two servers. If it were three I think I could control looping by limiting TTL, but with two I'm not sure how to prevent a loop causing bad things to happen. I've tried ttl=1 but things still blow up. The DUNDi configurations are pretty simple and work just fine in both directions as long as only one of them is using the switch

My phone still says Not-Registered. I have a Polycom SoundPoint 600 SIP phone. Here is my sip.conf file: ; ; SIP Configuration ; [general] context=default ; Default context for incoming calls port=5060 ;added bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0 binds to all) srvlookup=yes ;

Hi, I have Ubuntu server 10.04 64bit, and Asterisk 1.4.34, compiled from sources. I installed freetds-common,freetds-dev, libct4, libsybdb5, freetds-bin, but, when I run configure and then make menuconfig in section "Call Detail Recording" -> "cdr_tds" it's "disabled". It only writes that "Depends on: freetds(E)". On another server (same

Hi few weeks ago I read about redundancy (HA) of asterisk boxes using DNS, DUNDi, so I decided to give it a try. OS FreeBSD 6.1-RELEASE, asterisk 1.2.7.1 on one peer I get: lk110*CLI> dundi show peers EID Host Model AvgTime Status 00:11:43:3d:69:e6 195.28.109.37 (S) Symmetric Unavail OK (1 ms) 1 dundi peers [1 online, 0 offline, 0

Does anyone know what happens if you try to have 5 concurrent outgoing channels with VoicePulse Connect? Does it give you an error message or a reorder or something? I'm worried about using them as my primary carrier if this is the case. I noticed that they supposedly only allow 4 channels for free and then you have to pay $20 a month extra per channel. I'm guessing this is for inbound

Hi all, I'm planning to deploy many Asterisk servers for remote sites connected through IAX. Behind each server, there will be many sip clients connected. A sip client from one site must be able to make calls for the other sip clients connected to the other remote Asterisk servers. I've heard that DUNDi is a good option in order for each Asterisk server to locate the right (or the

It seems that when you use Realtime static and possibly realtime realtime for sip users, that Asterisk fails to create the regexten context for DUNDi. Someone else had the same problem back in July. Doesn't look like they ever had a resolution. <http://lists.digium.com/pipermail/asterisk-users/2006-July/160105.html>

Hello All, Ive been doing more and more research on trying to setup a cluster/load balancer for Asterisk. All the Asterisk boxes would be using a config that is the same between them all (via a DB), but we want one location to point the phones to, and from there that machine/device will send it to a Asterisk server so the call can be processed. I know you cant balance the whole call, ie: once the

Hi. I am trying to pass a variable from one Asterisk PBX to another. I'm using DUNDi with IAX2. Is there a way to do it? I tried the following but it fails. On peer1: [dundi-outgoing] switch => DUNDI/priv exten => s,1,Set(CDR(userfield)=test) exten => s,2,Set(DUNDIVAR=${ARG1}#TEST) exten => s,3,NoOp(Passing ${DUNDIVAR} to DUNDi peer.) exten => s,4,Goto(${DUNDIVAR},1) On

Questions: 1. Is the wiki DUNDi example and the dundi.conf file too difficult to follow for new users? 2. Does the complexity of the DUNDi setup discourage you from using it or even attempting to configure it? 3. If there was a simple tutorial, step by step guide with easy to setup and test examples, would this encourage more users to investigate and use DUNDi? I'm interested in putting

This is driving me nuts. Why doesn't the DUNDILOOKUP function return the weight of a path to a number? The CLI 'dundi lookup' command does. What about the mac address and expiry period? The CLI command returns those, but the DUNDILOOKUP function does not. Why? We absolutely need this in order to perform out routing logic. It has become quite apparent to me that DUNDi is _NOT_ suited