similar to: libpri Calling Line ID

Below is a snipped debug on our PRI. We are getting number only for the CallerID but the telco says they are sending us Name and Number. We are getting the Name in a second frame but Asterisk is not passing it to the device it rings. The message below says "Presenation allowed of network provided number" which leads me to believe Asterisk thinks it should not be displaying it. Can anyone

Anyone know why zaptel would ignore a facility message from an ISDN PRI. I am trying to get Callerid name to work. The carrier says it on and I see it in the pri debug but asterisk never gets it. Any help would be appreciated. Thanks John Bittner Simlab.net Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 572/0x23C) (Terminator) > Message type: ALERTING (1) >

I there, I have some trouble to do working caller id name for outgoing calls on the PRI we just installed. Caller id name work on incoming calls only. Caller id number work on incoming and outgoing calls. The provider, Goup Telecom, said that's in what i'm sending. They said that I send the cid name in ascii code and to do it working, I need to send it in hex. So I take some traces

Having a problem w/ not getting CID name from a PRI. CID Name appears in the PRI debug, but even after a Wait(4) it still appears after the phone is ringing. Here is the relevant info from my PRI debug output. Line 4 is a NoOp showing me trying to echo Name and Number. Line 6 dials the extension, and you can see callerid name get presented on line 29. Again, there is a Wait(4) before the

Anyone know what would cause this error? !! Got reject for frame 39, retransmitting frame 39 now, updating n_r! !! Got reject for frame 39, retransmitting frame 40 now, updating n_r! I assume this would cause audio issues as well. Thanks, Steve > Message type: CALL PROCEEDING (2) > [18 03 a9 83 89] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0

Hi All, Sorry for the double post, but I'm in a real bind. I have several * servers connected to T1 PRI's from various service providers in multiple locations the US. All the * servers use the same hardware with the same OS and * version CVS-v1-0-11/09/04-12:27:27. When connected to 5ESS Switches, using the NI2 (national) PRI protocol, the CID name and number come across fine and

Hi I have done everything richard told to do ECT . below is my trace, anyone can help ? -- DAHDI/i1/09123278669-4 answered DAHDI/i1/88050048-3 -- Native bridging DAHDI/i1/88050048-3 and DAHDI/i1/09123278669-4 PRI Span: 1 Adding facility ie contents to send in FACILITY message: PRI Span: 1 ASN.1 dump PRI Span: 1 Context Specific/C [1 0x01] <A1> Len:11 <0B> PRI Span: 1

The latest libpri is supposed to handle this properly, but doesn't seem to. Here's the debug info. CALLERID(name) is set to empty. < Protocol Discriminator: Q.931 (8) len=66 < TEI=0 Call Ref: len= 2 (reference 256/0x100) (Sent from originator) < Message Type: SETUP (5) < [04 03 80 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability:

Hey all, I am running a Asterisk 1.2.9.1 with Sangoma A101 card, newest firmware, configured with a help from Sangoma Tech Support, running fine. It is connected to a PRI circuit split from Cisco MC 3810, which in turn is connected to a Converged T from CTC Communications. While Asterisk works fine and I can call in/out on my BV account, I am only able to dial in through CTC. I have spent

Hello, I am trying to diagnose an intermittent error when a call comes in over our PRI lines. The problem appears random, however I have feeling it has something to do with the call volume, as the frequency increases with more calls on the system. I am not an expert when it comes to reading the PRI Span Debug statements but here is a call that had a problem and I bolded, italicized, and

Asterisk 1.8.4-rc2 (and 1.8.3) DAHDI Version: 2.4.1.2 libpri version: 1.4.12-beta3 We are having a problem with getting the nationalprefix option of chan_dahdi.conf to work. National calls do not have a "1" added to them when nationalprefix=1. The PRI debug shows the call coming in as a National Call, but the dialplan sees the call without a 1. chan_dahdi.conf: <snip>

Hey guys, i'm wondering if there is any good way to get app_queue working in real roundrobin strategy. The idea is to specify a call list of, lets say, 3 agants. Those agents should always be called in the correct defined order. So all calls have to get the following agent priority: 1st Agent -> 2nd Agent -> 3rd Agent I've actually solved that by defining penelty for the accounts,

Ok, so I've made progress on 2BCT (2 B-Channel Transfer). I'm assuming that the debug info below shows that XO doesn't have 2BCT enabled on my line, but if anybody can confirm that'll let me be way more indignant. J -- Native bridging DAHDI/1-1 and DAHDI/3-1 > Protocol Discriminator: Q.931 (8) len=28 > Call Ref: len= 2 (reference 801/0x321) (Terminator) >

Hi all, I have some problem to send a FAX to a given number. I use asterisk 1.2.18, on a openSUSE 10.2, i586 host. The FAX is sent out via an ISDN PRI interface, I'm in Germany, and the destination FAX devices are in Germany too, but in different areas, so I have to use a city prefix. I did set the pri device in debug mode, below are two calls, to two different FAX numbers, the first is

I'm not a PRI expert and therefore don't know what this debug stuff means for PRI, so if anyone can help me here... I'm running the latest libpri and zaptel from CVS. Keep in mind that everything works fine when using the STABLE libpri and zaptel. I am NOT running CVS asterisk. I am running 1.0.6. asterisk*CLI> pri intense debug span 1 Enabled EXTENSIVE debugging on span 1 T203

Hi I have a applikation (Oracle DB) which writes files with a backslash in names, i.e: Log\GEN_INPUT_BASED_2899.csv not a problem for Unix but Samba present it to Windows users as: L2CYOP~L.CSV Is there any way _in Samba_ to strip this 'Log\' and give back to user the GEN_INPUT_BASED_2899.csv part. Tha appliance (EMC Celerra) I've just migrated data from, was magicaly doing this.

I got the following compile error in R-1.9.0 on NetBSD 1.5: <-- snip --> ... gcc -I../../src/extra/zlib -I../../src/extra/bzip2 -I../../src/extra/pcre -I. -I../../src/include -I../../src/include -I/usr/local/include -DHAVE_CONFIG_H -O2 -mcpu=v8 -c main.c -o main.o main.c: In function `setup_Rmainloop': main.c:463: `CODESET' undeclared (first use in this function)

Hi all, I am trying to compare the performance of gcc , llvm-gcc , clang and lli(with JIT) on x86. i have attached the performance comparision spreadsheet as well as the source which i used for performing these test. i ran this code for 10000 iterations and the time of execution is as follows for -O3 results refer attachment. *time clang (-O0) llvm-gcc(-O0)

Told you it was too complex of an issue :-) I figured to do this in zapata.conf and all is fine now: transfer=no That was the magic two letter which was sending a request for RLT feature on the line. Set transfer to "no" and all worries gone. Thanks for the input everyone. -Bruce On Mon, Apr 12, 2010 at 10:10 PM, bruce bruce <bruceb444 at gmail.com> wrote: > Futher check

Hi all. I am searching for a way to send SMS via our E1 PRI line. We are in Portugal and I have seen some Internet/TV/Phone providers (ZON for those who know it) who install normal phones with SMS support in landline. So I just found a page from PT (Portugal Telecom) stating that the SMC number is either 12999 or 129990 (