similar to: ztdummy on 1.6

I'm running into a bit of a problem setting up conference calls. The box I rent at a colo doesn't seem to have USB hardware.... When I try to load usb-uhci I receive a "device does not exist" error. Which means I can't load ztdummy.... The system has a rtc clock module, so zaprtc won't work... (which I'm scared to unload rtc because I don't have physical access

Does anyone know where to disable rtc support on redhat 9.0 using make menuconfig? I thought I disabled it but still got the following error when trying to make zaprtc: zaprtc.c:109: storage size of `rtc_irq_timer' isn't known zaprtc.c:719: storage size of `rtc_fops' isn't known zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but never defined make: ***

I have a system with no Digium hardware in it (two others with 2 X100P cards in each of them as well). I'm interested in using MeetMe in the one without the hardware (it works great in the ones with the hardware). I can't use ztdummy, because the system has usb-ohci drivers, rather than usb-uhci. I have read the little there is about zaprtc, and I am wondering whether there is a

The USB core was completely rewritten in 2.6, and as such the functions that ztdummy depends on do not exist in 2.6. I get the feeling that these changes are too much to easily fix ztdummy, so I don't expect to see it working on 2.6 any time soon (if ever) I made some small changes to zaprtc to work on 2.6 and I have MoH and Meetme functions working fine in my lab. For production I would

Hi Everyone, I read through the list on the issues with the ztdummy driver which I need for MeetMe, but I seem to have come across a problem that I cannot seem to find an answer for. I am running Gentoo 2.6.10 on an Intel box. I have read the the wiki entries on the ztdummy and followed the instructions as they relate to the 2.6 kernel. Everything compiled great, but a modprobe ztdummy

Hi, I don't have a zaptel device for conferencing. I read from the lists, that ztdummy and zaprtc need to be installed to get conferencing. I could able to compile successfully with ztdummy and when i receive the call it says, -- Goto (13732,s,1) -- Executing MeetMe("SIP/-08118800", "1234") in new stack == Parsing

Hello- I've been trying to scour both * and linux user group archives for a solution to this particular problem, but I am just plan stuck. I got the latest zaptel sources from cvs, uncommented ztdummy.o in Makefile, ran make; make install then, did depmod -a. All is well up until now. When i do modprobe ztdummy, i get this error: dv@sidetrack:/usr/local/src/zaptel# depmod -a

Do the Zaptel cards actually have a timer that it supplies to Asterisk or is the phone company supplying the timer to the card that is then passed to Asterisk?

I need a timing device for the DL360G2 for conferencing and meetme. For a timing device I have 2 X100P cards but neither will work in my DL360G2. The system will not even boot with either card in the system. Other PCI cards seems to work fine. I called Digium support and was told that there must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I'm sure the

Anybody having issues with ztdummy under the current 2.6 RC7? I get the following errors when trying to modprobe ztdummy: "Unable to register zaptel rtc driver" Doing a Google on the error shows reference to a message from 2004 that said you might not have RTC compiled into the kernel. Checking via: cd /usr/src/linux-2.6.13-rc7 grep -i rtc .config shows: CONFIG_APM_RTC_IS_GMT=y

Any help would be appreciated as I am a novice trying to work around a difficult situation. This is what the zaprtc helpfile says: zaprtc, getting zaptel timing out of your realtime clock ======================================================== Make sure that you _dont_ have rtc support compiled into your kernel! INSTALL: make USE: make load REMOVE: make unload I interpreted this as

Hi, I've install zaptel and I don't have a Digium card installed in the machine. So I want to install ztdummy to have Music On Hold working. I've follow these instruction http://www.voip-info.org/wiki-Asterisk+timer+ztdummy and at the point "modprobe ztdummy" it's failing. I'm getting these messages: root@dubic:~# modprobe ztdummy FATAL: Error inserting ztdummy

Yes, I am a newbie too. I am having a problem with meetme. From what I have seen it will work without a Digium card but with audio problems. My goal is just to see how it works not the quality of the audio. When I dial into the conference room the following message is played: "That is not a valid conference number." On the console I get: "unable to open pseudo channel". As

I feel there is some unclarity about the need for a timer in Asterisk. As Asterisk moves into production environments, this needs to be sorted out. I'm setting up an Asterisk in a production environment with no Digium cards at all. It is planned to be used as a clean SIP hosted PABX, where we connect to the PSTN via gateways with proper echo cancellation. There is no USB driver on the card.

Hello System: Debian etch with kernel 2.6.18-4-686 or 2.6.18 custom. Asterisk Version: SVN-branch-1.4-r55483M Zaptel Version: SVN-branch-1.4-r2302 modules all ok in compilation time. And modules loaded: ztdummy 5928 0 rtc 13364 1 ztdummy zaptel 181540 1 ztdummy crc_ccitt 3200 1 zaptel In /dev/zap directory I have:

Hello, Maybe I'm missing something here. What is the proper way to use RTC with ztdummy now? I'm using -HEAD from a day or two ago on Linux 2.6.11.11. In zaptel/Makefile, I changed CFLAGS to: CFLAGS+=-I. -O4 -g -Wall -DBUILDING_TONEZONE -DUSE_RTC #-DTONEZONE_DRIVER and I get.. make -C /lib/modules/2.6.11.11/build SUBDIRS=/usr/src/zaptel modules make[1]: Entering directory

I've compiled ztdummy, following the directions on http://www.voip-info.org/wiki-Asterisk+timer+ztdummy, and when I try to modprobe zt : #modprobe ztdummy FATAL: Error inserting ztdummy (/lib/modules/2.6.18-gentoo-r6/misc/ztdummy.ko): Input/output error FATAL: Error running install command for ztdummy I haven't been able to find any info on what the I/O error might be or how to

What does it take to get ztdummy to work correctly? I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel 1.4.9.2 Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs. Problem is playback() does not work. So then I stop zaptel, asterisk runs and playback() now works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for that. I am

Hi to everybody, seems that I cannot load the zaptel modules: ztdummy says the following: [root@Hayabusa misc]# modprobe ztdummy /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_unregister /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_transmit /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_receive /lib/modules/2.4.22/misc/ztdummy.o: unresolved symbol zt_register

Hi all , In my pbx ,there is no zaptel card ,so i loading ztdummy,but problem appear,when i dial the number into the pbx,sometimes i can not listen to the ivr ,and no rtp create. if i unload the ztdummy driver,the proble will disapper. I guess may be the timer source problem, but i dont't know how to solve it . anyone can give me some advices will be appreciated. asteirsk-1.4.21 and