similar to: Compiling Zaptel 1.4.0 on SuSE 10.0

Hi Guys, Gals. Ok, so I have latest CVS sources on a debian box, 2.6.10-1-386 kernel kernel headers isntalled in the right plauce and all that stuff .. but whatever I try .. same results, I only need to get ztdummy working for a conference .. but I always end up stuffed :( heres the compile: robin@debian:~/zaptel$ make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE

Thanks to all that have helped me so far. I have made a lot of progress. I am able to make prilib and zaptel. Now to Asterisk... After installing the kernel source, I have: # cd /usr/src/linux # make cloneconfig # make prepare-all Then I have run ./configure in the asterisk-1.4.4 directory. I have: # make clean # make Which goes through a number of compiles and then ends

Now that struct vmbus_driver_context is properly cleaned up, rename this structure appropriately and cleanup the code. Signed-off-by: K. Y. Srinivasan <kys at microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz at microsoft.com> Signed-off-by: Mike Sterling <mike.sterling at microsoft.com> Signed-off-by: Abhishek Kane <v-abkane at microsoft.com> Signed-off-by: Hank

Now that struct vmbus_driver_context is properly cleaned up, rename this structure appropriately and cleanup the code. Signed-off-by: K. Y. Srinivasan <kys at microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz at microsoft.com> Signed-off-by: Mike Sterling <mike.sterling at microsoft.com> Signed-off-by: Abhishek Kane <v-abkane at microsoft.com> Signed-off-by: Hank

Hi all, I hope everyone is doing well. I just joined the list, and I've really enjoyed all I have read about asterisk so far. Unfortunately, I'm having a bit of trouble implementing this thing :). By the way ... I did my best to search the forums, and also to use google extensively, and while I have found pages with people with the same problem, ... The fix suggested on those sites,

Hi, i'm traying to compile asterisk on my pc, a laptop whit SUSE 9.1 and a desktop with SUSE 8.2, with a teles S0 16/3 PnP. With Kernel 2.4 (Desktop) Asterisk run but it's umpossible to compile the driver ISDN-utils for Teles. With kernel 2.6 I can't compile zaptel (not necessary with my laptop) and asterisk, in both cases I receve errors during make or make linux26 (I saw the notes

Have anybody experience with the following error on a linux system. The system is for the rest running perfect without problems. The system was full installed with Suse 9.1 and updated. Following uname is my kernel 2.6.5-7.104-default Greatings Han Suse 9.1 professional AMD Atlhon XP 2200 Asus A7V600-X bios 1005 1Gb memory 400Mhz Geforce MX 4000 64MB 40 GB Harddisk

I keep running into the dead end that it can't find config.h in the source tree. It looks like newer kernels don't use it anymore. Someone ran into this awhile back when compiling 1.2 and it looks as though the issue was never resolved. Any ideas? Last time I tried this, I was on fedora core 5 64bit and all went well. It's not working on this newer setup Any ideas on what I can do

Hi all, I decided the best way to get to know * well is to do it from scratch. Having read the majority of the "Asterisk: The Future of Telephony" I am now attempting to compile zaptel 1.4.0 and am receving the very same series of errors mentioned in this post on the forums: http://forums.digium.com/viewtopic.php?t=13619&highlight=zaptel1+++zttranscode++error However, there has

Hi, I'm having trouble compiling zaptel 1.4.4 on SUSE 10.1. I'm really only interested in getting ztdummy to work because this is a dev machine with no zaptel h/w. SUSE 10.1 is a 2.6 kernel: asterisk-dev:/home/hugh # uname -r 2.6.16.13-4-default It seems that my problem is related to autoconf.h - I cannot find that file: asterisk-dev:/home/hugh # find / -name 'autoconf.h'

Hello~ I have a embedded system:CPU=Intel PIII 850 ; RAM=256MB ; Hard Disk=64MB CF; original kernel=linux 2.4.21 ; new kernel=linux 2.6.15.6 syslinux.cfg: SERIAL 0 19200 TIMEOUT 80 DEFAULT linux PROMPT 1 LABEL linux KERNEL linux APPEND console=tty0 console=ttyS0,19200n8 root=/dev/ram0 initrd=image.gz LABEL linux26 KERNEL linux26 APPEND console=tty0

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

I've got a fresh FC2 install and I'm trying to get the symlinks right according to the /usr/src/zaptel/README.Linux26 instructions. I've created two symlinks: /usr/src/linux-2.6 -> /usr/src/linux-2.6.5-1.358 /lib/modules/linux-2.6 -> /lib/modules/2.6.7-1.494.2.2 When I do a "make linux26", I get a million warnings and errors with the result being: make[2]: ***

I am using centos 4.4 ,when I am compiling zapltel using l make linux26 ,error accrued ,what s missing [root@localhost zaptel]# make linux26 grep: /include/linux/autoconf.h: No such file or directory make: *** No rule to make target `linux26'. Stop. Regards ********************************************* No employee or agent is authorized to conclude any binding

I know that this subject has been treated in the past! As a matter of fact reading some old messages about compiling zaptel I made a couple of tests after the first compiling failure to understand why I can't compile on a specific machine, but I do not know how to handle the results. The machine has SUSE 9.3, and an updated kernel (2.6.11.4-21.7-default; as shown below). YAST (the graphical

Hi All trying to compile asterisk under linux kernel 2.6.6. Currently under zaptel get the following error make linux26 Link /usr/src/linux-2.6 to your kernel sources first! make: *** [linux26] Error 1 as going from the readme. is 2.6 not compatiable with asterisk and should I go back to 2.4.26. Also has anyone got the sipura 3000 working with asterisk, both fxo and the fxs ports on the

Hi, it helps to have configured and working kernel sources installed. Configure your kernel sources for the running kernel and then run "make" in the kernel source dir to build the necessary scripts. You dont have to wait until the kernel is compiled. best regards Klaus -- Klaus-Peter Junghanns Am Samstag, den 25.06.2005, 02:45 +0200 schrieb Stefan Gofferje: > Hi folks, > >

I tried to test Asterisk 1.4 on FC6 x86_64. I have it working on FC5 x86_64 very good, but since FC keeps updating, I tried to follow newer kernel versions. I can't pass the zaptel compilation. Everything is OK, but when I finished, and tried to load it, allways got module not found when I run modprobe zaptel, and modprobe ztdummy. I already tried to modify is with the sed 1 option but

Dear list, I am back with my problem compiling zaptel 1.0.9 . I am running SUSE 9.3, with kernel linux-2.6.11.4-21.7 I have the kernel sources on disk. YAST tells me they match the compiled kernel. > # ls -l /usr/src >total 1 >drwxr-xr-x 7 root root 280 2005-07-16 13:24 . >drwxr-xr-x 12 root root 344 2005-07-16 11:27 .. >drwxr-xr-x 25 root root 736 2005-07-16 12:12

Hi, I'm setting my lguest playing environment with qemu, but didn't have a good start... maybe because my modest laptop only has 512Mb of RAM. This is my qemu command: qemu -s -no-kqemu -m 400 -hda linux26.img -net nic,model=3Drtl8139 -net tap ( linux26.img includes a 2.6.21.5 kernel with the lguest-2.6.21-307patch= ) This is my lguest command