similar to: Cisco 7914 with sccp

Hi All I'm trying to get my 7970 working on the latest head version of Asterisk without success, perhaps someone could help. I'm using the head version of Asterisk with the chan_sccp from berlios.de dated 7th August. The compilation of chan_sccp seems to have worked without any problem, however I'm pretty sure the problem I have is with the config files in TFTPBOOT:- With the 7970

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

Hi ! On Cisco 7960 (with or without 7914 add-on module) when I press speakerphone button (or select line with line button - which automatically put second line on speakerphone) after about 15-20 seconds of dialtone Asterisk stable dies (seg fault). Tested versions of Asterisk are 1.0.2, 1.0.3 or 1.0.5, chan_sccp is newest form CVS of chann-sccp.sourceforge.net ). Firmware of 7960 is

I have some Cisco 7960's and want to use them with SCCP - I have gotten it working with a few different firmware versions but all seem a little flakey. I know that SCCP is not as solid as SIP but am wondering, which firmware version is advised for use with chan_sccp from http://chan-sccp.sourceforge.net/ -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

I'm trying to setup a couple of Cisco 7960's in asterisk. I have asterisk working fine for sip clients, and can call the 7960's just fine, but I can't seem to dial out on them. As soon as I enter the first digit, the phone attempts to dial it without waiting for the rest. I've changed timeout settings, etc but can't seem to get it to work. Any ideas? Asterisk

Hi, Does anyone have any experience with a Cisco 7961 + 7914 Operator Console setup and speeddials/BLF on Asterisk 1.4? Would appreciate feedback if this works reliably. I have a 7961 on skinny registering on an 1.4.19 box with chan_sccp and speeddials work fine so that part seems ok. I have no experience with the BLF part. >From googling around it seems that BLF on the 7914 only works with

Hi, Has anybody been successful in running the 7914 expansion unit for the Cisco 7960G IP phone? For anybody unaware of what the expansion unit does, it provides 14 additional buttons, with an LCD display. The idea, is that with an expansion unit (a 7960 can take upto 2 of these units), a user can either assign more speed-dial's, or can monitor line status/account status. So, you can

Hi, I need to set up call forwarding from the operator to one of our internal numbers. Asterisk get the incoming call and Operator A or B answer to the call. Then he/she should redirect the call to any of our internal numbers or an internal group. I'm using CISCO 7912 fot the client and two CISCO 7960 for the operator all with chan_sccp. How can I make it possible? Thanks in advance to

Hi, This is a message I already posted on the chan_sccp mailing list, but since this list has a lot of active members, I'm hoping someone might be able to help (And my problem is * related, so I guess it's ok if I post it here also ;) ). I'm trying to get SCCP ATA188s to run with Asterisk. The Asterisk box uses the latest Asterisk@Home image (Version 2.6). I have compiled and

Hello list, Has anyone on list had experience with getting the 7914 module working with Asterisk, probably using the chan-sccp drivers? I have 7912 and 7940 phones working OK, I need something for reception, and I was thinking a 7960 with two of these modules would handle it, but need to know that someone has got it working somewhere (seeing lines that are free, busy etc) Mikel

I am looking into the possibility of buying a Cisco 7960 with a 7914 expansion module. I know a lot of people are using the 7960, but I haven't read much about the 7914 and I was wondering if anybody has used this module with Asterisk? -- Thank you for your time __________________________________ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com

HI all: I have spent a large amount of time configuring/installing phones connected to Asterisk. Halfway through the process I discovered that my Cisco7960 with 2 7914 expansions was not supported in the SIP protocol. After reverting to SCCP 6.0(4.0) I am now perplexed with the hassle of configuring SCCP to properly work with Asterisk. So far I have gotten the phone to dial and receive calls

Any one knows where to install chan_sccp for asterisk 1.4 ???????. Please guide me from where can I download the asterisk 1.4 sccp channel driver and how to install it because I tried to get chan_sccp-mayday05.tar.gz When I trying to install it ,error happened like this. Please help me how to solve this issue. [root@XPL t]# cd chan_sccp [root@XPL chan_sccp]# make clean rm -rf

Hi, Does anyone know how to make this thing (7940) work with asterisk (chan_sccp module) ? I've set the configuration according to the wiki and now the phone just keep asking for CTLSEP<xxx>.tlv from my tftp server. In the cisco's web interface, I found this in the device logs : 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 ...

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket

Hi All I have recently downloaded Asterisk and was so impressed I thought I would setup a home server and I went out and got myself a couple of cisco 7940's. (and a sipaura 3000!). thanks to various posts on this list and the voip-info site I have managed to get chan_sccp setup and working with the 7940's but the I tried to get the messages, services and softkeys working. It seems

When I try to compile the new chan-sccp-easter2005 with asterisk 1.0.6 I get the following error on make: Now compiling .... chan_sccp.c 744 lines chan_sccp.c:67: conflicting types for `sccp_request' chan_sccp.h:1723: previous declaration of `sccp_request' sccp_pbx.h:5: storage size of `sccp_tech' isn't known make: *** [.tmp/chan_sccp.o] Error 1 I tried looking in

I have been trying for sometime to upgrade this phone to either sip, or the latest sccp (at this point I don't care) with no success. It has an sccp image (don't know the version off the top of my head) that is incompatible with chan_sccp. When I boot up the phone, it asks the tfpt server for the .tlv file, then the SEP<mac> file which it receives successfully. It then asks for