Displaying 20 results from an estimated 6000 matches similar to: "Boot load wcfxo does not configure self under Ubuntu 6"
2003 Jul 14
2
insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)
Thanks in advance
root@asterisk01:~# modprobe wcfxo
/lib/modules/2.4.20/misc/wcfxo.o: init_module: No such device
/lib/modules/2.4.20/misc/wcfxo.o: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20/misc/wcfxo.o: insmod /lib/modules/2.4.20/misc/wcfxo.o
2004 May 04
1
Error when loading wcfxo
I found similar posts regarding this error but none that answered my
question.
My zaptel.conf reads:
fxsks=1-2
fxoks=3
loadzone=us
defaultzone=us
and /proc/interrupts:
CPU0
0: 5542402 IO-APIC-edge timer
1: 2 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
8: 3 IO-APIC-edge rtc
14: 72582 IO-APIC-edge
2003 May 13
1
invalid argument 22 when modprobe wcfxs and wcfxo
Hi all
I ahve been having problems loading the wcfss and wcfxo drivers
I get an error message invalid argument and something about post install insmod
failed
the currently load modules do show the drivers loaded but asteris won't start
lsmod
root@slackware:~# lsmod
Module Size Used by Not tainted
soundcore 3332 0 (autoclean)
wcfxo
2007 Jul 04
2
Need advice to get wcte11xp and wcfxo to load
I have a X100P and a TE110P in my Asterisk box. I can either get the
X100P or the TE110P to work, but never both. Here's my zaptel.conf
span=1,0,0,d4,ami
e&m=1-24
fxsls=25
When I load wcte11xp and wcfxo, I will get this error.
[root at asterix etc]# modprobe wcte11xp
ZT_CHANCONFIG failed on channel 25: No such device or address (6)
/lib/modules/2.4.20-8/misc/wcte11xp.o: post-install
2006 Nov 30
6
zaptel compilation problems with linux 2.6.19
Hello!
I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 -- all
give the same error) with 2.6.19 kernel
CC [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o
In file included
from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26,
from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28:
2006 May 02
3
Need help configuring TE100P and 3 X100P clone with MD3200 chipset
I can either get the TE100P working or the 3 X100P clones working, but
never both. I have the TE100P connected to a channel bank, and X100P
clones to lines from the phone company.
This is my zaptel.conf
span=1,1,0,d4,ami
fxsks=1-24
loadzone=us
fxols=25-27
loadzone=us
I then do
[root@asterix root]# modprobe zaptel
[root@asterix root]# modprobe wcte11xp
ZT_CHANCONFIG failed on channel
2003 Dec 06
3
some success with linux 2.6 and wcfxo
Hi ,
I picked up a x100p the other day and thaught I'd havea go at getting the
driver going for linux 2.6, things have gone pretty, two basic problems.
1. makefiles, with 2.6 you can't get away with using the old makefile to build
the kernel modules, they will build but you'll get an error along the lines of
"no module found in object". This is due to not using the new
2004 Dec 10
2
[Fwd: Re: udev or not?]
Forwarded back to the list so others might get the benefit of the
answers, and I get fact checked by others.
-------- Forwarded Message --------
> From: Lee <leeb00@gmail.com>
> Reply-To: Lee <leeb00@gmail.com>
> To: Steven Critchfield <critch@basesys.com>
> Subject: Re: [Asterisk-Users] udev or not?
> Date: Fri, 10 Dec 2004 13:00:29 -0800
> On Fri, 10 Dec 2004
2003 Apr 06
1
problem with X100P and wcfxo
I have two X100P cards that were working just fine for months. When I run modprobe wcfxo today I got the following error:
ZT_CHANCONFIG failed on channel 2: No such device or address (6)
/lib/modules/2.4.19/misc/wcfxo.o: post-install wcfxo failed
/lib/modules/2.4.19/misc/wcfxo.o: insmod wcfxo failed
The output of dmesg said that
wcfxo:Out of space to write register 06 with e0.
What?s
2007 Feb 21
3
Zaptel 1.4.0
I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make
install and I don't see any errors. This is out of my modprobe.conf:
install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg
install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg
install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg
install wcfxo
2003 May 17
3
E400P and 2 X100P working, but not together
Hey all,
?
I'm trying to get an E400P and 2 X100Ps working together in the one box
and don't seem to be having much luck.
?
I can get the two different types of boards working separately, but not
together.? I've made calls on both the X100P and have seen sync and
correct signalling on the E400P.? But when I try to enable to configs
together I get the following:
?
modprobe wcfxo
2005 Oct 06
3
WCFXO and T1 PRI Card?
Can I have a TDM400 and a T100P in the same machine? I am using AAH and
trying to combine two boxes.
If so, can anyone tell me the proper config for zaptel.conf and
zapata.conf?
Thanks!
Wiley
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051006/061d9d84/attachment.htm
2004 Jan 21
1
Strange Zaptel Modprobe driver failure
Hello, my first post to the list. I have started to install and play with
Asterisk. I was following some basic instructions to 'jump-start' my
system. I have a TDM400P with one port and a X100P.
I am running the latest CVS versions (from today).
Following the steps I found for basic jump-start I did the following:
Modprobe zaptel
Modprobe wcfxo
Modprobe wcfxs
Edited
2004 Aug 29
2
zaptel configuration
Hi,
I've been trying to get my zaptel x100p cards working for the past
week now. this is what I've done:
installed asterisk:
make clean
make linux 26 (for fedora core 2)
make install
installed zaptel:
make clean
make
make install
did a modprobe zaptel, and wcfxo
got this in /var/log/messages:
PCI: found IRQ 11 for device 0000:00:0f.0
wcfxo: daa mode is 'FCC'
found a
2006 May 25
3
X100P fails to initialize
So I took a chance with an X100P knock-off on eBay. I'm running Asterisk +
FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel
2.6.16.16. Everything has been fine up until now.
I compile the 1.2.5 Zaptel drivers without a problem, get the udev
configuration in, modprobe zaptel, and finally modprobe wcfxo. At this
point, I get the message:
ZT_CHANCONFIG failed on channel
2003 Jun 12
1
fxs card not loading in new computer
(I'm producing a writeup on all the things one run into building an * box.
Which after a couple of boxes is showing up aplenty.)
So this uses the working h/w and config's from another box. All I do is
build in a new computer.
Loading the modules I got:
__________________________________________________
Zaptel Configuration
======================
Channel map:
Channel 01: FXS
2005 Jun 17
2
PLEASE HELP X100P no responding
[root@server ~]# modprobe zaptel
[root@server ~]# modprobe wcfxo
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
FATAL: Error running install command for wcfxo
[root@server ~]# ztcfg -vvv
Zaptel Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address
2004 Aug 26
1
Newbie needs help - Dev_Kit_Lite installation problem
Installing DevkitLite hardware (Very similar to John Lange's post on Tue
Oct 08 2002)
I cannot get anything to work on the phone connected to the s100u. I dont
know what to do.
Can someone please help me?
I used the sample configuration files from digium documentaion that was
supposed to be "sane" defaults for the kit.
Very similar to John Lange's post on Tue Oct 08 2002
Here
2003 Feb 28
2
error in tor2
i have error in install module of tor2.
but it compile good.
what happen ?
ivr2:/usr/src/zaptel # make clean; make install
rm -f torisatool makefw tor2fw.h
rm -f zttool
rm -f *.o ztcfg tzdriver sethdlc
rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo
rm -f gendigits tones.h
rm -f libtonezone*
rm -f tor2ee
rm -f core
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o
2005 Jan 28
1
FC3 + udev + Asterisk v1.0.3 - Temporary Fix
I haven't seen anybody so far post a complex fix for the udev problems on
FC3 with the latest kernel. On that note, I have a temporary fix to allow
zaptel to load somewhat normally. I found that modifying the zaptel script
to 1) load, unload, then load the driver modules and 2) insert a pause
between modules seems to allow things to work. This assumes you have
followed the instructions