similar to: IBM Server / USB Ports

hi you, I'm having problem with voice quality on my trixbox using TDM2400B.The trixbox is connected via 20 FXO ports on a TDM2400 with the hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a 'background crackle/buzz' coming back when they talk. anyone have the same problem? pls help me. thanks a lot. my trixbox and config

A previous issue has popped up and once again I'm out of ideas. During the evenings it seems that the TDM channels will spike (dahdi_monitor) and will refuse to listen for audio of any type, this includes DTMF. The only resolution I know of is to stop Asterisk and restart the dahdi service, but that's not a solution. All channels look like this, even the FXS. [root at asterisk Hardware]#

Hi, I'm cutting my teeth setting up a home asterisk server, but having some trouble getting Zaptel to recognize a X100P clone PCI (Motorola SM56 which should work according to various wiki's). What struck me was that the "/proc/interrupts" do not include IRQ 11 as the "lpcpi -v" is reporting. Am I missing something fundamental here? Any hint is greatly

Hello I've got small PBX (30 simultaneous connections) based on asterisk (1.6.2.6), which uses Stargate 2N ISDN to GSM gate. It runs ok for day or two, but then I get: dahdi: HDLC Receiver overrun on channel TE4/0/1/16 (master=TE4/0/1/16) in my kernel logs, in asterisk i get: pri show spans PRI span 1/0: Provisioned, Down, Active PRI span 3/0: Provisioned, In Alarm, Down, Active (span 3

Anyone else seen this eth-device and what brings it up? [root at oh1mrr etc]# ifconfig __tmp1192348344 Link encap:Ethernet HWaddr 52:54:AB:DD:2E:D1 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2094689 errors:0 dropped:0 overruns:0 frame:0 TX packets:1645734 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX

Hi All, I recently got some IBM Xseries 335 servers 2nd hand, and noticed they don't have any graphics card. Some google searched indicate they only have an uplink port, which you could connect to another (other model) IBM server and use that as the head node. But, I don't have one available. It has 2x GB NIC's, and what looks like a management port, but I can't figure out how to

I'm not having any trouble with interrupts, but here's my /proc/interrupts on Fedora Core 2 on a hyper-threading CPU and using the SMP kernel (2.6.5-1.138). I don't think I need to worry about uhci_hcd, nothing is plugged into USB, but libata is the disk driver. How do I get libata and wctdm to use different interrupts? $ cat /proc/interrupts CPU0 CPU1 0:

Hi There, Can someone have a look at the specs of this server, found here: http://www-8.ibm.com/servers/eserver/nz/xseries/x366/specs.html and let me know if this is a VT-enabled server? The outline lists this server as having: Intel Xeon Processor MP up to 3.66GHz (single-core) and 3.00GHz (dual-core)/667MHz front-side bus, both support Intel Extended Memory 64 Technology. Thanks Simon

Your Zap conf files would be helpful. Zttest results? Cat /proc/interrupts. Sharing interrupts? Any funky error in the logs? Thanks, Steve Totaro http://www.asteriskhelpdesk.com > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Administrator TOOTAI > Sent: Thursday, May 10, 2007 6:24 AM

" Message from syslogd at localhost at Aug 27 08:57:53 ... kernel:Disabling IRQ #17" is the message I got on all my terminal windows at the time indicated. What is it complaining about? What should I do about it? I got some information from dmesg. It mentions IRQ 17, but the only error is from before the most recent hibernation. Here are some excerpts, in order from dmesg: SELinux:

ok now i bought an IBM xSeries 206 but my problem is the hard drive can't be detected. I tried surfing for drivers for SATA and i found one for RHEL 3 can this driver works for CentOS 4.2? -- Regards, Mark Quitoriano, CCNA Fan the flame... http://www.spreadfirefox.com/?q=user/register&r=19441 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does anyone recommend any particular SAS controller, or should I use an Ultra-320 SCSI controller instead? My machine is an IBM xSeries 306m. It has a SAS controller provided on a daughter card, but it''s not supported in the 2.6.16 kernel, so I''m looking for a separate disk controller card that will work with my existing SAS disks. -- James Holmes Programmer/SysAdmin RTDS

Hi , I have setup xen on a number of different machines already; however, I couldn''t get xSeries 330 working with Xen. When it boots up, it says "Waiting for device /dev/sda1 .... device not found" and then return a shell prompt. I have looked up this error on the mailing list. I found that the error is potentially caused SCSI driver and it can be resolved this problem by

Hello I am using a Junghanns QuadBRI ISDN card - the module name is qozap. If I like at my interrupt assignment, qozap is sharing interrupt 10 with libata and uhci_hcd. I think libata is the IDE hard drive module and uhci_hcd is a USB module. linux:~ # modprobe qozap linux:~ # cat /proc/interrupts CPU0 0: 12634579 XT-PIC timer 1: 10 XT-PIC i8042

Hi all, I recently bought a Intel D2500HN motherboard with Intel GMA 3600 video card. I want to install FreeBSD 9-Release on it via PXE, but after booting the system, it seems that video card driver doesn't work properly. Have a look at this picture: http://img703.imageshack.us/img703/5648/20120714393.jpg I've tried the # vidcontrol 80x25 but unfortunately it doesn't help. Do

Hi, I'm trying to figure out the cause of a soft lockup I experienced: Mar 29 09:38:24 pstn1 kernel: BUG: soft lockup - CPU#0 stuck for 10s! [asterisk:32029] Mar 29 09:38:24 pstn1 kernel: Pid: 32029, comm: asterisk Mar 29 09:38:24 pstn1 kernel: EIP: 0060:[<c046e7fe>] CPU: 0 Mar 29 09:38:24 pstn1 kernel: EIP is at kfree+0x68/0x6c Mar 29 09:38:24 pstn1 kernel: EFLAGS:

Have anyone experienced mixed meetme conferences? Im running a 12 seat call center outbound only. Asterisk 1.2.8, SIP/ulaw at the phones, SIP/ulaw to the SIP terminator. Machine: pentium Dual core 2.0ghz (533 fsb) , 1 GB RAM (533mhz ddr) , 2 SATA 80GB DISK in RAID 0 via software RAID driver. Two Intel PRO 10/100 NIC, IRQs are separated, an X100P so not to use ztdummy. Motherboard is an Intel

Does anyone on list have experience with Digium hardware in the following servers: Dell poweredge SC440 IBM xSeries x226 Have just had major hassles getting TE205P ISDN cards going in these boxes. No joy so far. Anyone managed to do it yet? Thanks. Mark

Hello: I have an odd problem with an IBM EServer XSeries 305 (aka x305). Sometimes it seems to just sit there, completely unresponsive to the command line (ssh and console), for several seconds. Other times it works normally. top will sometimes die with a floating point error while waiting for it to start. When top does work, it often shows a system load of 0.5, with high interrupt load. At

Hello all I tried to enable PCI Passthrough in my Debian Squeeze installation. Unfortunately, it didnt work. The following bug showed up (excerpt from dmesg): [ 10.148612] uhci_hcd 0000:00:14.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 4.678352] Failed to setup GSI :11, err_code:-22 [ 4.678480] dmfe 0000:00:0e.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low)