similar to: gain problems with zaptel 1.4 beta 2

Hey guys, I'm having some trouble with gain settings using a Wildcard X100P and Zaptel 1.4 Beta 2 on Asterisk 1.4 beta 3. My transmit volume between an IAX client (idefisk) and a POTS device through my 1.4 box is great, but my receive volume is terrible. I can hardly hear a word they say. I've cranked my gains up to 100, inserted the wcfxo module with boost=1, but haven't had

Have anybody experience with the following error on a linux system. The system is for the rest running perfect without problems. The system was full installed with Suse 9.1 and updated. Following uname is my kernel 2.6.5-7.104-default Greatings Han Suse 9.1 professional AMD Atlhon XP 2200 Asus A7V600-X bios 1005 1Gb memory 400Mhz Geforce MX 4000 64MB 40 GB Harddisk

I am having a problem compiling zaptel on my Arch Linux (linux 2.6.10) system: CC [M] /home/sbn/src/zaptel-1.0.3/wcfxs.o /home/sbn/src/zaptel-1.0.3/wcfxs.c: In function `wcfxs_interrupt': /home/sbn/src/zaptel-1.0.3/wcfxs.c:473: sorry, unimplemented: inlining failed in call to 'wcfxs_proslic_check_hook': function body not available /home/sbn/src/zaptel-1.0.3/wcfxs.c:810: sorry,

Hello! I'm having an echo problem with a TDM card. The TDM card is being fed by a channel bank just 12 or so feet away. When you put an analog handset on the line, both the RX and TX volume seem to be just fine. However, when I use the TDM card, I have to have an rxgain of 13.5, and even then, the audio is relatively quiet. I'm also getting echo on these lines, so I have turned

Hi, Thanks for giving me a detailed reply on hardware needs steven. I have been looking at the archives in detail and found a few people have had problems with zaptel compilation on suse(kernel-source-2.4.19.SuSE-342 // gcc 3.2.2 ) ... is shifting to red hat the only viable scenario...would be a pain cuz suse comes with sun java desktop system( just bought it !! ) ... any fixes would be a

We've inherited a pair of mostly identical PBX systems, each with a TDM400P Rev I boards and 4 FXO modules. The production system is running Asterisk-Now with 1.4.9, and despite some other issues, it is able to answer inbound calls just fine. The replacement system is currently running Asterisk 1.2.28, and is unable to detect incoming calls, outbound calls work fine. We discovered later

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

Hello, Talking with Soren Sratje about Caller ID in Brazil, we compare ours DTMF tones captured by ztmonitor. wcfxo correctly recognize the "DTMF CLIP" and asterisk shot the AST_STATE_PRERING correctly. But the DTMF tones are not reconized. In the chan_zap.c, the code: if (f->frametype == AST_FRAME_DTMF) { (...) Does not occurs because the frametype is always reconized as voice

I know that this subject has been treated in the past! As a matter of fact reading some old messages about compiling zaptel I made a couple of tests after the first compiling failure to understand why I can't compile on a specific machine, but I do not know how to handle the results. The machine has SUSE 9.3, and an updated kernel (2.6.11.4-21.7-default; as shown below). YAST (the graphical

I try to compile zaptel, without much success. I followed the guidelines in http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation making dependencie results in: asterisk:/usr/src/linux # make dep *** Warning: make dep is unnecessary now. and make tells me make[1]: *** No rule to make target `modules'. Stop. asterisk:/usr/src/zaptel # make clean rm -f torisatool makefw tor2fw.h rm -f

Hi, I have the SuSe9.2 installed in a box with a QuadBri. I have followed all the instructions i have found and this is my best result... only one error compiling zaptel :( .. y have the kernel sources an already made the links to its drwxr-xr-x 8 root root 328 Jun 16 20:20 . drwxr-xr-x 12 root root 320 Jun 16 14:05 .. drwxr-xr-x 3 root root 136 Jun 16 20:17 asterisk drwxr-xr-x 22 root

I wouldn't normally post this to the asterisk mailing list but I'm really stuck... I've been trying to get meetme working on and off for a few months now but I always hit a brick wall when trying to compile. I keep seeing this... make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o gendigits.o

Hi all, I'm unable to complete the installation of zaptel. I did a checkout today from cvs. When I do make clean; make install. It gives me an error at this portion of the installation: /include/linux/modversions.h -DSTANDALONE_ZAPATA -c wct4xxp.c cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o ztcfg.o ztcfg.c cc -c -fPIC -I. -O4 -g -Wall -DBUILDING_TONEZONE

Dear list, I am back with my problem compiling zaptel 1.0.9 . I am running SUSE 9.3, with kernel linux-2.6.11.4-21.7 I have the kernel sources on disk. YAST tells me they match the compiled kernel. > # ls -l /usr/src >total 1 >drwxr-xr-x 7 root root 280 2005-07-16 13:24 . >drwxr-xr-x 12 root root 344 2005-07-16 11:27 .. >drwxr-xr-x 25 root root 736 2005-07-16 12:12

Anyone seen this and know how to fix it? (note the Assembler messages at the end). Thanks in advance: server# make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits > tones.h cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64

Hi Guys, Gals. Ok, so I have latest CVS sources on a debian box, 2.6.10-1-386 kernel kernel headers isntalled in the right plauce and all that stuff .. but whatever I try .. same results, I only need to get ztdummy working for a conference .. but I always end up stuffed :( heres the compile: robin@debian:~/zaptel$ make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE

I'm having a bit of an issue with one of the bargain x100p clones, and I'm not sure what the right approach is. My symptom started as way loud offset delayed echo from voip hardphones -> PSTN through the clone card. I played with and then learned everything I could about echo cancelling, and have managed to bring the echo down to acceptible levels, where it's not too intrusive. In

I have been trying to adjust the gain as per this document without any success: http://lists.digium.com/pipermail/asterisk-users/2004-November/071301.html I have a PSTN and VoIP (SIP) connection via *. I disabled all echo cancel/training in zapata.conf and set tx/rxgain to 0. I then changed my extensions.conf so that when I call the VoIP line from the PSTN line, it plays the Milliwatt

Hi all! I'm new to asterisk and I'm trying a simple config with: - Debian GNU/Linux (unstable) - last version of Asterisk - a X100P card I have a problem with dial out from a SIP software phone (XLITE) to a public number (ex. my mobile phone), asterisk start the call, but nothing happen... If I run "ztmonitor 1" I can see the right RX level and if I try to make a call with an