similar to: -- Called 12127773456@OOH323 Segmentation fault (core dumped)

has anyone managed to get these three beasties to work together ? we're using ooh323 from asterisk-addons-1.2.2, asterisk 1.2.6 and microsoft netmeeting default from windows xp. the symptoms are that calls from a SIP client to NetMeeting rings on NetMeeting, but upon answering the call in NetMeeting, no audio is passed between the two. eventually, the call times out and hangs up. on a

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

All, I'm running (attempting to) ooh323 with Asterisk and a Cisco 2621XM router operating as a H.323 GateKeeper, however when I bring the Asterisk box up it registers successfully with the GateKeeper (exchanges GRQ/GCF, then RRQ/RCF) it notes the GateKeeper supports keepalive at 300 seconds, when it gets to time to re-register its sends an RRQ again and gets rejected with RRJ (unspecified

Hello All Anybody had used ooH323 for asterisk i using ooH323-0.7.2 and asterisk CVS may 2005. OpenH323 1.17.1 and pwlib 1.9.0 and GNUGK 2.0.2 audio is very good, better than SIP and IAX, but i have problem. how to router call from openh323 to outside PSTN. my h323.conf setting ; Objective System's H323 Configuration example for tvcti ; ooh323c driver configuration ; ; [general]

Hi all. Trying to setup H.323 via Asterisk between a PLANET H.323 box and my SIP phones. When calling from the SIP phones, it connects but quickly disconnects citing the following error message: **** --- build_peer +++ build_peer +++ reload_config +++ ooh323_do_reload -- Executing Dial("SIP/yyy-2965", "OOH323/203@xxx") in new stack --- ooh323_request - data

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- <DAHDI/2-1> Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- User entered

All, I'm haveing a bit of trouble getting my head around H.323 and call routing with Gatekeepers, Zones and intra-zone calls - hopefully someone who is more informed in things H.323 will be able to point me in the right direction...? I already have a mature network of Asterisk boxes dotted around the UK and overseas with hundreds of extensions and our own number-plan/dial-plan in the form

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- USER ENTERED 'THE PIN NUMBER' Jan 19 10:00:43 VERBOSE [7177] logger.c: --

Hi, I'm trying to configure Asterisk as SIP-H.323 Gateway via ooh323, but I have an error relatively to the GK Confirmation message. >From the log: "H323 RAS channel creation - succesful Sent GRQ message Gatekeeper Confirmed (GCF) message received ERROR:No Gatekeeper ID present in received GKconfirmed message Ignoring message and will retransmit GRQ after timeout Error: Failed to

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

I am having a slight issue. I am trying to register 2 asterisk boxes with GNUGK and when I try to add the 2nd it gets denied cause of it saying its a duplicate. How do I change the configs to allow more than one asterisk box register to the same GK? brian This email was scanned by: Mcafee GroupShield ---------------- CONFIDENTIAL DISCLAMER ---------------- All information provided in this

Dears; I am having same problem, that when I place a call from the H323 end point (even if it is not added in the ooh323.conf), then asterisk handle the call and play the wave file in the default context. Also I added endpoint to the ooh323.conf and same thing, it keep goes for default context whatever the context placed. My Asterisk vesion is 1.4.25 My Asterisk add-on version is: 1.4.8 What I

Has anyone had any luck getting Asterisk 1.6.2.13 to register to a Tandberg Gatekeeper? The logs on the Asterisk end seem to show that the registration request is sent, and the Tandberg Gatekeeper responds. However, the response doesn't seem to be what Asterisk was expecting. Here is my ooh323.conf, followed by the relevant portion of the h323_log: [general] port = 1720 bindaddr =

Hello, I'm trying to create a H.323 trunk between Asterisk 11 and Avaya. I have done this before between Asterisk 1.6 and Avaya but had some issues placing external calls from the Asterisk to the Public network which is connected to Avaya. I'm trying to create that trunk on Asterisk 11 because the 1.6 is outdated and has no support. On the Asterisk side I have Aastra 6731i SIP phones

I'm trying to set-up H.323 support under Asterisk. I built a recent CVS release and the ooh323c code from the asterisk-addons. Everything built and installed and the H.323 stuff loads OK when asterisk starts. What is the easiest way to check if the H.323 code is working? I've edited the h323.conf and extensions.conf files but I'm sure that things aren't right. I've

hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes h323id=gw10 at test.com settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833

hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes h323id=gw10 at test.com settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833

Stephan, Ok, I'll re-state the problem... I have two devices that I want to talk to each other: 1. an Asterisk PBX 2. a Damm Cellular TETRAFLEX digital radio system (www.damm.dk) both devices are effectively "gateways" because they have many subscribers behind them. The Damm Cellular system controller is based on Windows-XP Embedded and its sub-systems used the OpenH323

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

Hello all, I have problem. I can't makel asterisk addon, asterisk-ooh323. I use Asterisk and addons svn version. OS:redhat EL4 Linux 2.6.9-5.EL #1 Wed Jan 5 19:22:18 EST 2005 i686 i686 i386 GNU/Linux Please help me . [root@asterisk asterisk-ooh323c]# make make all-am make[1]: Entering directory `/usr/local/src/asterisk-addons/asterisk-ooh323c' source='src/chan_h323.c'