similar to: ParkAndAnnounce + Paging

[Sorry it's the third time I send this message as I couldn't see it in the list. I hope it will not come three times]. Hi everybody. It is possible to announce the parking position through a paging to a group of extensions? I would like that when someone parks a call, some phones will announce with the speaker the position. Something like: exten =>

Hi *, I hope this is not a FAQ, but I couldn't find any solution until now. I need to set an escape character to stop digits timeout to let phone calls start immediately. Something like '*'. I saw that in many SIP phones it is possible to set timeout and escape character and the most have a "send" button. But in an analog phone connected to a Digium TDM?

Hi All, When a call comes into my FXO port (Zap/1), it goes into the ParkAndAnnounce app and gets parked. This is OK. Then the app announces the file I selected through the (Console/dsp). This is OK. If I go to another extension FXS (Zap/2) and dial the parked call, then I get connected OK (Zap/2 & Zap/1). The problem is the Announcement through the (Console/dsp) doesn't stop, it

In theory ParkAndAnnounce has a lot of usefulness, however, that we've had very little success with application... Our application is similiar to the local Walgreens pharmacy.. Dr. Calls in, selects the "Im a doctor with a prescription option"... call is parked, and announcement overhead is given.. "Doctor holding on ${EXTEN}" exten =>

Hi everyone I'm very, very, very, ... very new to Asterisk and I need some help with the ParkAndAnnounce command. Here's what I would like to do. I would like to specify an extension in the extension.conf file which is using the ParkAndAnnouce command (something like this) exten => 200,1,Answer exten => 200,2,ParkAndAnnounce(PARKED|60|SIP/${EXTEN}|some_context,${EXTEN},1)

Hi everyone I'm very, very, very, ... very new to Asterisk and I need some help with the ParkAndAnnounce command. Here's what I would like to do. I would like to specify an extension in the extension.conf file which is using the ParkAndAnnouce command (something like this) exten => 200,1,Answer exten => 200,2,ParkAndAnnounce(PARKED|60|SIP/${EXTEN}|some_context,${EXTEN},1) exten

I have ParkAndAnnounce set up to call my cell instead of Console/DSP and this works fine. If a caller tries to get me on my cell, they are parked... I am called and told where they are holding, but then ParkAndAnnounce hangs up. So I have to call my system back and dial the parked extension to be bridged with the caller. Is there anyway to make the announce jumpto something else so I can just

Hi Guys, I've been trying to get this application to work but I'm getting inconsistent results. My music on hold works fine by itself, I can park calls all day, works every time. I can dial the Console/dsp all day by itself and it works every time, sounds great, even play announcement gsm recording through the console, it just works. When I invoke the parkandannounce app, the

Regarding my earlier email (for some reason, I don't get my own emails from the list), I looked at the code and although I'm no programmer, I see that this is meant to hangup after the announcement. If I comment that line out, the call remains on the line, but I'm in limbo. I tried to add a chan->priority = 101 in place of the hangup and get this on the cli: = Spawn extension

I have an office up and running with 40 SIP handsets. Currently when an incoming call is parked, they then dial ext 9876 which I have setup to do a page (it does this through an agi script that uses the Polycom autoanswer to page via the phones). What I would like to be able to do is transfer the call to a new extension #699 for example, and have that park the call and then connect the

I have been testing * with some Cisco 7912G's, in hope to trash our Nortel system. One feature our Nortel system has that I will need to fiqure out on the * system is paging. Is it possible to page a group of phones (all phones) with announcements? We are a k-12 school and we use our current phone system to make announcements on the phones monitor speaker. Any direction I can be pointed in

Has anyone else had problems with the Page() application not working under Asterisk 1.2.3? We use Cisco 7960 phones and set one of the lines to auto answer. When someone dials the paging extension it calls the page app and invites all the lines on the phones that are set to auto answer into a meetme conference where all the members are muted except the original caller. When I try to use the

I am looking to setup paging using the auto answer feature on the Grandstream GXP2000. I am thinking I will follow the method as described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page I will setup the 4th account on the phone to auto answer. Does anyone else have a method that works better? I also looked at the allpage AGI written on Voip-Info. But it seems

I'm using a mix of Cisco 7960, Linksys SPA-942, Cisco 7961, Cisco 7970 phones in a paging group. I have all the phones set up with an extra line that auto answers the dial from my paging extension when the primary line is not in use. All of these are operating correctly however the 7961/7970s all ring once and then auto answer so the person paging all the phones has the first part of his

We've had a regular Park function in the past but recently I found the ParkAndAnnounce() application and I love the idea behind it. Here's a snip from the wiki (http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+ParkAndAnnounce) so that we're all talking the same language: || ParkAndAnnounce(announce:template|timeout|dial|return_context) || || Park a call into the

Hi I'm trying to get the rebuilt parking functionality to work in Asterisk 12.0.0. In Asterisk 11.6.0 I managed to get a call to get parked by adding a dynamic feature in features.conf for the DMTF sequence *# which called a macro in extensions.conf, which then runned the ParkAndAnnounce application, and the call got parked. The syntax for ParkAndAnnounce I used was this (I don't

Good Day list, My head is pounding from google overload. Does anyone know if there is any way to park a call and specify the ("context", "Extension", and Priority) of where to call back to if the call times out and is parked too long? ParkAndAnnounce does this feature, however I do not like that it has to call you back to announce the location. I want my cake and eat it

(Sorry if this has hit the list before. I sent it yesterday, but never saw it come through) I actually got rid of my phone service.. no more pots line in my house. But, I miss my call screen macro. Any way to do this with a SIP channel? (Obviously the parking isn't the problem, but rather recording their name). I set it up so they should only have to record their name once provided they

So, I can't figure out how to get the parkandannounce application to work the way I want it to... I have cisco 7960 IP phones using SIP, and this is what I have in my extensions.conf: exten => 700,1,ParkAndAnnounce(pbx-transfer:PARKED|90|SIP/${EXTEN:1}|internal,${EXTEN:1},1) exten => 700,2,Hangup and in my parking.conf: [general] parkext => 700 ; What ext.

Hi: I want to make parking calls easier for my hard-working users. Is there a way to make the Polycom call park feature work with Asterisk? In case it just works out of the box, I haven't tried it yet; but the "call park" feature isn't enabled on the Polycom phones by default. -Stephen-