similar to: Modprobe zaptel reports FATAL: Module zaptel not found

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

I am changing a system from zap to DAHDI. I removed everything zap. when doing the command: sh -x /etc/init.d/dahdi start, I see initlog -q -c 'modprobe wct4xxp' sh: /sbin/ztcfg: No such file or directory FATAL: Error running install command for wct4xxp doing updatedb then, locate zap returns me /var/lib/asterisk/sounds/spy-zap.gsm /usr/share/groff/1.18.1.1/font/devps/zapfdr.pfa

Are the RPMs for the latest GFS kernel module GFS-kernel-2.6.9-72.2.0.8 to be used with the version 2.6.9-55.0.9.EL available ? I tried to compile the Source RPMs available from the Red Hat site but the modules can't be loaded because of invalid module format arising from version magic issues. The syslog shows: node0 kernel: gfs: version magic '2.6.9-55.0.9.ELsmp SMP 686 REGPARM

Hi All, I have a CentOS server that I am trying to configure Asterisk on 1.4 on. Everything seems to go ok, with regards to compiling Zaptel, Libpri, Asterisk (will be using kernel 2.6 timer and ztdummy) Unfortunately I can't insmod / modprobe ztdummy. [root @xyz src]# modprobe ztdummy FATAL: Module ztdummy not found. FATAL: Error running install command for ztdummy

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

Hi, I made a big mistake on a Centos 4.2 box - I forgot to exclude the kernel from updating. Now zaptel will not do a "make linux26" see below. Is there a way to roll this back or is there a patch to get Zaptel to compile? I have a link to the modules using 'ln -s /lib/modules/uname -r/build linux-2.6" so that I did not have to specifiy the kernel version directly. ....

Hi Tzafir / List Here is some more information obtained from the commands you gave me: 2.6.9-42.0.3.ELsmp #1 SMP Fri Oct 6 06:21:39 CDT 2006 i686 i686 i386 GNU/Linux kernel-2.6.9-42.EL kernel-smp-2.6.9-42.EL kernel-ib-1.0-1 kernel-devel-2.6.9-42.0.3.EL kernel-2.6.9-42.0.3.EL kernel-smp-2.6.9-42.0.3.EL kernel-utils-2.4-13.1.83 I did check the "/lib/modules/2.6.9-42.0.3.ELsmp"

Hi all, I've installed CentOS 4.4 in a box which previously had dual boot (XP SP2 and Ubuntu) I can run CentOS without problem but I can't boot XP SP2. When I try it the system simply hangs... [root at seth ~]# fdisk -l Disco /dev/hdb: 40.0 GB, 40020664320 bytes 255 cabezas, 63 sectores/pista, 4865 cilindros Unidades = cilindros de 16065 * 512 = 8225280 bytes Disposit. Boot Start

I've seen others with a similar problem, but have yet to find a solution. I'm using CentOS 4.4, installed the ocfs2 package to match my kernel. Installed ocfs2tools. I can open the ocfs2console just fine, but when trying to add a node, it tells me the cluster stack could not be loaded. When I do /etc/init.d/o2cb configure, I get: Cluster to start on boot (Enter "none" to clear)

I get the following error when trying to mount: Nothing changed (in any case not that I know of). I get the same error from both nodes. Please assist. # mount /u02 mount.ocfs2: Invalid argument while mounting /dev/sdd1 on /u02. Check 'dmesg' for more information on this error. /etc/fstab: /dev/sdd1 /u02 ocfs2 _netdev,datavolume,nointr 0 0

Chuck, Thank You I'm also going to try CentOS 3 The problem is I have SATA HDD and running in to trouble getting Linux installed. Will update after I test Ver 3 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chuck Bunn Sent: Monday, March 13, 2006 12:45 PM To: Asterisk Users Mailing List -

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 145 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20070214/87a4f4f6/attachment.gif

I've got a fresh FC2 install and I'm trying to get the symlinks right according to the /usr/src/zaptel/README.Linux26 instructions. I've created two symlinks: /usr/src/linux-2.6 -> /usr/src/linux-2.6.5-1.358 /lib/modules/linux-2.6 -> /lib/modules/2.6.7-1.494.2.2 When I do a "make linux26", I get a million warnings and errors with the result being: make[2]: ***

I am using centos 4.4 ,when I am compiling zapltel using l make linux26 ,error accrued ,what s missing [root@localhost zaptel]# make linux26 grep: /include/linux/autoconf.h: No such file or directory make: *** No rule to make target `linux26'. Stop. Regards ********************************************* No employee or agent is authorized to conclude any binding

Anyone seen this and know how to fix it? (note the Assembler messages at the end). Thanks in advance: server# make linux26 cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64 -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -DHOTPLUG_FIRMWARE -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits > tones.h cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -m64

[root@iw-asterisk zaptel-1.2.1]# make gcc -I/lib/modules/2.4.21-4.ELsmp/build/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/lib/modules/2.4.21-4.ELsmp/build/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/lib/modules/2.4.21-4.ELsmp/build/drivers/net/wan -I/lib/modules/2.4.21-4.ELsmp/build/include/net -DMODVERSIONS -include

Hi all, I'm pretty new to linux and compiling modules, but I've scoured the web for help on compiling the zaptel modules from source and I get the following error... make -C SUBDIRS=/usr/src/modules/zaptel modules make: *** SUBDIRS=/usr/src/modules/zaptel: No such file or directory. Stop. make: *** [linux26] Error 2 Any ideas? /usr/src/modules/zaptel is the dir I'm

I am trying to install the Cluster RPMS from rpm.karan.org. But since I have updated my kernel with yum, I have the wrong kernel for a couple of the packages. # rpm -i --test cman-kernel-smp-2.6.9-36.0.i686.rpm error: Failed dependencies: /lib/modules/2.6.9-11.ELsmp is needed by cman-kernel-smp-2.6.9-36.0.i686 kernel-smp = 2.6.9-11.EL is needed by cman-kernel-smp-2.6.9-36.0.i686

Hi all, I have some problem with xm save/restore in Xen-4.0.0 & linux-2.6.31.13, First, the /etc/init.d/xendomains seems do not work properly because of bash version. So I modified it as follow: root@r02k08027 # diff -up /etc/init.d/xendomains /etc/init.d/xendomains_31 --- /etc/init.d/xendomains 2010-04-08 00:12:04.000000000 +0800 +++ /etc/init.d/xendomains_31 2010-04-19