similar to: Trunk Alcatel - Ring problem and call disconnection

Hi guys, I have an Alcatel 4200 with a ISDN board pluged in the asterisk server with TE110P. Input calls VOIP Proider ---> Asterisk ---> Alcatel Output Calls VOIP Proider <--- Asterisk <--- Alcatel In alcatel phones, users should dial 2 for take a line tone and can dial. At this point start my problems: 1. When users dial 2 on phone (alcatel) they don't received a dial tone,

Hi for all, i 've installed asterisk with isdn trunk with alcatel pabx. When alcatel users dial for external numbers, a channel on asterisk is allocated for dial. When we call to an number that is an IVR the digits isn't recognized by IVR. In sip.conf i putted dtmfmode as rfc... and info, inband is only for 64k codecs, and still don't work. How can i resolve this issue ?? Thanks.

Hi for all, i 've installed asterisk with isdn trunk with alcatel pabx. For alcatel users use asterisk lines, should dial 0 to take tone from asterisk. In default configuration in alcatel, if user dial 0 this error occour: !! Unexpected Channel selection 3 -- Extension '' in context 'default' from '' does not exist. Rejecting call on channel 0/31, span 1 In alcatel

If you're talking screen pops, crm integration, type CTI, Trixbox has hooks built in for SugarCRM. Cory Andrews -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Matt Florell Sent: Monday, November 27, 2006 3:59 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users]

Hi guys, It's possible i scheduler in cron some kind of script or application that read asterisk logs and send via e-mail a complete report for pbx activity in specified period ?? I like to see how simultanios calls was made, total time in conversation, averege time of calls, most routes calls, etc.... Thanks. -- Frederico Madeira fmadeira@gmail.com www.madeira.eng.br -------------- next

Hi guys. I'm working on a VOIP service provider. We have two customers running asterisk. Customer A and B. When A call to B everything is ok. When B call to A the call ring but sip messages didn't arrive on asterisk A. In my softswitch i see the invite sip message sended to A. When every other numbers(TDM and SIP) call do A everything is ok. Have any issue in asterisk that can resolve

Hi guys, My asterisk is show me some errors on line registration. This message appear on console: Request to schedule in the past?!?! What it mean ? Thanks. -- Frederico Madeira fmadeira@gmail.com www.madeira.eng.br

I have an asterisk box registering 100 numbers on a voip provider. Numers are: 2546.1000 to 2546.1099 My problem is that every incoming call arrived to number 2546.1099 that is the last number to register on voip provider. The correct is call arrive in destination number. See this exaple: I call to 2546.1000. -- Executing Dial("SIP/25461099-08738060", "Zap/g1/3000") in new

Hi, I just compiled and installed Asterisk-1.4.2 along with zaptel-1.4.1 and libpri-1.4.0 on a Debian machine with a TDM400P card. Everything goes ok but when I try to make a call through the ZAP channel get an error message about NO ZAP CHANNEL AVAILABLE. Ztcfg and zttool show the card correctly installed. When I tried to use the debug command ZAP SHOW, it was not present in the CLI. My

Hi, My asterisk was working fine but today my calls won't out of my asterisk box. Restarting asterisk i need to wait around 10 min to can run sip show registry command. If i try to run this command before, i receive a error like: no such command. Why this happen ? Thanks. -- Frederico Madeira fmadeira@gmail.com www.madeira.eng.br

I'm registering 5 lines on my asterisk box from one voip provider. Lines; 4040.0000 4040.0001 4040.0002 4040.0003 4040.0004 All lines is registered in 5060 port so when someone call to 4040.0001 the call arrive on asterisk but arrive to last number registered 4040.0004becouse it is listening on same port as all others. How i make each number register in one different port, like

Hi Guys, I Have this peers on my sip.conf [provider-302333-3000] type=friend context=provider secret=xpto username=3023333000 host=sip.provider.com fromuser=3023333000 insecure=very canreinvite=no [provider-302222-3001] type=friend context=provider secret=xpto username=3022223001 host=sip.provider.com fromuser=3022223001 insecure=very canreinvite=no I Have in my sip.conf two extension 3000

Hi guys, I have an asterisk box with sip 20 internal extensions and 100 lines registered on a external voip provider. For most part of time, it work fine, but in few moments it act ignoring sip packets becouse my ip phones can't register in asterisk and asterisk can't register his 100 lines in external voip provider. I have log's only for external registration error: [Apr 16

Few days back I installed Asterisk 1.4.2 with Zaptel 1.4.0. All SIP accounts were working fine, today I tried to install a fxs Sangoma A200 card and got the following error. [Apr 12 01:15:17] WARNING[31018]: channel.c:3024 ast_request: No channel type registered for 'Zap' [Apr 12 01:15:17] WARNING[31018]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'Zap'

Hi all: We are looking for someone with experience in Alcatel PBX - PRI - Asterisk integration Please get in touch off list.. We're wanting to hire a professional subcontractor, developer or company to get around some issues like these: Asterisk shows PRI to Alcatel is up, but when trying to dial from Alcatel to Asterisk results in a disc tone (Asterisk do send calls properly into

Hi, Does anyone have any experience connecting asterisk to alcatel 4200 series pbx with bri cards? Does it should work with asterisk bri in NT mode, and alcatel bri with TE mode? Cheers, Igor Neves.

Hi all, We have Xeon-based system with only 1 (hyperthreaded) CPU (in a HP DL360). We are seeing high load on multiple meetme session as well as g729 transcoding. My question is will putting an extra CPU help or does Asterisk just run on a single CPU. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have connected asterisk box with legacy PBX Alcatel OmniPCX 4400 (and also another * box connected to A4200). These PBXes have function to assign name to extensions and display it on phone. Asterisk box is connected via PRI with euroISDN signalling (also I have tried QSIG). Is it possible to set callerid with name and display it on alcatel digital phones? With command SetCALLERID

Hi Guys, I've setup a asterik box on a trunk with alcatel 4200 pabx. When operator do a call for somedestination terminated by our asterisk he can't transfer this call until called party answer that call. He can't transfer call when it's only ringing. This is a issue of Asterisk or from Alcatel. This PABX have 2 ISDN links. One with asterisk and other with other carrier.

Does anyone have any input into integrating asterisk with a alcatel 4400 PBX. Acording to what i've found is that Alcatel uses R2 for E1 -- regards Vikram (http://www.vicramresearch.com)