similar to: flash transfer problem in asterisk with old PBX

I've tried to transfer a call using the Flash command, but with my configuration it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk that acts like an IVR: TELCO line --> traditional PBX (FXS) --> (FXO) Asterisk >From the TELCO line I can make a call to the traditional PBX and reach Asterisk, the IVR system on Asterisk answers the call and I can

Dear All I have this setup [asterisk]----[mediant2000]-------E1 Trunk----------[Avaya] When i call from avaya to asterisk i got long ringing tone then hangup but when i call from asterisk to avaya i got 4 ringback and then hangup with this error *CLI> Jun 26 01:26:08 NOTICE[5555]: chan_local.c:523 local_alloc: No such extension/context 1022 at mysip

Hi! I am trying to setup a simple queue in Asterisk and I'm having a small problem. Our callers come in through a Bosch PBX and are immediately transferred to an Asterisk menu/IVR. If they select the option to call a SIP phone directly (eg. entering the operator's SIP extension) then the callee/operator can transfer the call to a phone within the Bosch system. What Asterisk does is

Hi, everybody: As part of a paging macro I'm using SendDTMF to send digits to the called party. The section looks like this: exten => s,1,Wait(0.5) exten => s,n,SendDTMF(9531290) exten => s,n,Wait(1.0) exten => s,n,Set(MACRO_RESULT=CONTINUE) To test I direct the call to a live extension just to hear what's happening -- what actually happens is that only the 9 is sent, and

I have been trying to figure a way to SendDTMF into a MeetMe room using the Manager API. I can't redirect everyone into another context and then bring them back because that would mess up my logic. I am trying to use local channels and the originate Action to accomplish this. Exten: 3441115 Priority: 1 ActionID: actid-00000001 Context: senddtmftones Action: Originate Channel:

Hi all, I'm testing Dovecot version 1.2.17 on FreeBSD 8.2-RELEASE using ZFS as filesystem. Searching on google I've ridden about some problem concerning indexes and mmap. I wold like to know if this problem persists on the latest releases. Thanks in advance. Roberto Giuliani.

This 2 line code is doing what I wanted. exten => 200,1,voicemail(200) exten => 200,2,Hangup What I've been told is that they want the 20 year old phone system to light up the message bulb. (yea, a filament bulb, not an LED) To do this you pick up on the line that goes into Asterisk and do a: exten => 200,1,SendDTMF(200w#86) But I don't know the path to take to get that

Hi, I am trying to understand why some of my call transfers fail. My scenario is as follows: Legacy PBX1 ---PRI (EuroISDN) Zaptel--- Asterisk PBX2 Step1: PBX1 extension 101 calls PBX2 extension 102 Step2: PBX2 extension 102 answers the call and transfers it to PBX1 extension 103 Step3: PBX1 extension 103 answers the call and transfers it to PBX2 extension 104 Step3 fails and extension 103

There isn't much documentation on adsi, but I called NETXUSA (the vendor of my 480e) and they helped me along. My experience: 1. I really had no experience with ADSI so I had (probably still have) some misconceptions on how the configuration is loaded onto the phone. 2. I set the following in my /etc/asterisk/asterisk.adsi (most of this is the stock asterisk.adsi script): ;

I'm not sure why but my call is being ended when I SendDTMF(*). I'm using agi to originate a call and set the context,extension,priority to test,1,1 respectively. I've got the following in my extensions.conf: [test] exten => 1,1,Answer(); same =>n,Wait(5); same =>n,Verbose(1, Sending *); same =>n,SendDTMF(*,500); same =>n,Verbose(1, Sent *); same

for the particular configuration of software/hardware that connects to my asterisk pstn gateway I need to do something like the following : [...] exten => _X,3,Dial(CAPI/02xxx.b${EXTEN},60,M(senddtmf)) [...] [macro-senddtmf] exten => s,1,SendDTMF(*) but the DTMF must be sended to the caller channel, and not the called : SIP -> * -> ISDN SIP calls some ISDN number, when ISDN picks

Hi I'm trying to generate a Recall/Flash on an FXO (TDM400) connected to a PABX and failing at the moment. I was using the Flash application, which seems to generate a hook flash as opposed to a Recall. Debugging the Zap channel output using a second FXS channel gives me the following << [ TYPE: Null Frame (5) SUBCLASS: N/A (0) ] [Zap/1-1] << [ TYPE: DTMF (1) SUBCLASS: 1 (49) ]

Hi I've got an Asterisk box connected to a Siemens Hicom 300 using a Digium TDM400. The Hicom provides the calling extension as DTMF at the beginning of the call followed by two *, as in 3425** when 3425 calls my extension, I can hear all 6 tones if I have a handset connected but using Asterisk's Read application straight after Answer() Asterisk usually only gets the last *, sometimes the

On Tuesday 23 May 2017 at 19:20:25, Tech Support wrote: > All; > > What I did was add a line in the dialplan that used the SendDTMF() > application and that worked great. The problem that I?ve run into now is > that dialing the extension screwed up the answering machine detection. The > sample context looks something like this. > > [play-audiomsg] > exten =>

I have a dialplan that requires that we use * to send the long distance access code to AT&T. I have found in the list that the `w` command can be used to inject a pause, I have tried the following: exten => _91NXXXXXXXXX,1,Dial(ZAP/g1/${EXTEN}www5555555,70) There `5555555` is the ld access code. I tried various quantities of `w`s but I never got * to dial the ld access code. Allof the

List, Having a little trouble with the following. Let me prefix by saying I have blind transfers working from the following setup. Inbound call [from-zap] (SIP/sv0071iv) answers. Zaptel -> Asterisk -> SIP extension SIP extension then blind transfers [from-sip] --- SIP extension -> Asterisk -> Zaptel During this whole process, the original channel off the trunk (lineside T1) is

Hi, I was woredering if you could help me to put into practice this solution. The idea: Create a IVR-Voicemail The scene: PSTN------/6------PBX--------/12--------- Internos | /4 ports | IVR-Voicemail The Operation: 1)Where a call enters from the PSTN, the PBX flashes and

Hi, After some testing I've found out that my client's hardware recognizes DTMF only if digits are sent 50ms apart with 50ms of tone duration. This was tested using a test device which generates DTMF. Now asterisk doesn't do it by default because digits going out from Asterisk are not being recognized. Using command sendDTMF, I can control inter-digit duration, and using

Problem: Flash on X100P does not flash. Phone line has Call Transfer. With this line plugged into a regular phone, it can receive a phone call. Then, depress the hook momentarily, release. Dialtone is now available. Dial a different number. Call is answered. Hook Flash again, now in a three way call. Hang up. The other two parties are still in communication. Now, plug same line into the X100P.

Have you seen how these sub-one-cent companies take off on Good News? For the past two months, every one we have brought you has shown Amazing Appreciation. At such a low price even the smallest Gain means a Significant Percentage Return. We called (P)(P)(T)(L) as one to watch on Friday because of a Highly Anticipated Report from the Field. It moved up 13% on Friday and the news