similar to: Caller Id not propagated to the analog line

Dear List, My problem is that the incoming Caller Id is not displayed on the local analog phones (connected to a TDM400 card). I receive the CID correctly from my telco, but when I place the call to the internal analog line, the CID is not propagated. An interesting point: when I try to place a new call to an already bridged line, I see the second call with the CID on the analog phone. The

Hello list. I have a question about how to read the incoming calls' callerid on an FXO interface of a TDM 400 analog card; (it's one of those RED modules). Now -may this is the complexity adding step..- I have a GSM gateway attached to this FXO thing; incoming calls are processed as they should. But both when peeking on the CLI, as well as in the phone display I do not see the caller id.

Hello, I'm new to asterisk and trying to set up a PBX that's connected to ISDN on the telecom operator side (Swisscom, Switzerland) and has analog line on the local side. I use Digium B410PF and AEX2460EF cards. Globally, everything is working well except that I can't get the CID sent to the analog phone. I tried with all combinations of options I could think of and several asterisk

I'm having trouble with a WX100USB adapter and a Siemens Gigaset cordless phone. If I select fxols as a signalling method, calls are being disconnected. Usually after about 4 minutes, and asterisk just says that the phone has hung up. If I choose fxogs, I immediately get a LINE IN USE message on my phone and I can't even get a dialtone. If I choose fxoks, it mostly works, but sometimes

Hello, I'm preparing a setup before installing it within the next few days. In this setup, I'm using a SPA112 as an ATA for an analog phone. The target phone is a Gigaset A400 DECT handset. In my lab, I've got another A400 handset and an old Matracom 46 handset. When I connect my Matracom 46 handset to my SPA112, I can send and receive calls. When I connect my A400 handset to the

Hi all... I have a problem with caller id on my asterisk server. here is my configuration : centos-5, asterisk 1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2 ibm X-3200 series, xorcom astribank (16fxo, 8fxs), 16 line telco (hunting) everything fine until I try to feed my app with caller id. My extensions.conf : [incoming1] exten =>

I've updated to the latest CVS as of today (and rebuilt RedHat 9). My setup is as follows: Wildcard X101P - channel 1 TDM400P - channels 2-3 - fxs cards with fxo signalling, channels 4-5 - fxo cards with fxs signalling I got CallerID to work on channel 4 with an old CVS, despite the usual "Didn't finish CallerID spill" message. However, as soon as I insert the following

i belong to india. i am making pbx using sangoma fxo card. i want that when ever call comes to my PSTN line i should see the no from where call is coming. so i have to configures chan_dahdi.conf according to my region. i checked dahdi.conf and in that they have mentioned for india

Hi, I'm using Asterisk 1.2.18 on a Debian Etch box. I've noticed a very strange fact which causes a bad prob. When I get an inbound call, I make 4 phones ring at the same time, one is a Snom while others are Gigaset C450IP with _latest firmware_. When I get a call and answer with the Gigaset, a second call going to voicemail makes the first call received on the gigaset C450IP stop

Hi, It seems to me that DECT Gigasets do not support MWI when connected to a Polycom/Kirk DECT base station : when a new message is dropped into user's mailbox, I can see a NOTIFY message sent by Asterisk to Polycom/Kirk DECT base station (here a KWS300) but Gigaset's handset MWI remains unlit. At the same time, a Polycom/Kirk handset subscribed to the same base station would turn its MWI

Hi list, Before purchasing a number of Siemens DECT SIP phones, the Gigaset S675 IP, I read that the problems with MWI had been fixed with the latest firmware version (see http://www.voip-info.org/wiki/view/Siemens+Gigaset+S675IP). Now I'm not so sure that's the case. After setting up a network mailbox for one of these phones, as well as an Asterisk voicemail account (ext.

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type"> <title></title> </head> <body bgcolor="#ffffff" text="#000000"> <br> <meta content="text/html;charset=ISO-8859-1"

hi list. after my unsuccessfull experiences with mISDN i tried again to implement a zaphfc based solution. problem is: sound on calls via capi is stuttering/broken and therefore unuseable. my conf: - cel 1300, 256mb ram - avm b1 via capi connected to my outgoing ISDN - acer surf pci via zaphafc and crosslink cable with termination as internal bus - siemens gigaset 3035 as internal phone -

I had to return my TDM11B because it put the PSTN line 'off hook' the moment I plugged it in and wouldn't hang it up. The new card seems to work because I can actually make an outgoing call from the FXO port to my cell phone, so I'm pretty happy about that. But Asterisk doesn't recognize incoming calls from the PSTN. If I dial my home phone from my cell phone asterisk

When you configure the Siemens gigaset handsets (I have S685IP), there is a single option for all handsets to use either the POTS interface or VOIP as the default outbound destination - you then need to add a dial suffix if you want to use an alternate outbound route. Does anyone have any suggestions as to how to make just *one* of the DECT handsets only use the POTS but others default to

I'm having no end of trouble with some Siemens Gigaset phones and GS HT286s. Gigaset 100 and 3010 phones work perfectly, but a 4010 only rings once then it goes off and then just flashes it's LEDs and displays "incoming call" on the LCD with no further ringing. According to the manual it is CTR37 but the only setting on the GSs is CTR21, I've tried different cables but some

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

Hi folks, I wonder if any of you out there are using Siemens S685IP base station(s) (with S68H handsets) on Asterisk and experiencing problems with SIP registrations where the SIP extensions do not ring and peers become unreachable after a period of time. Symptoms are rather sporadic, but as described, SIP extensions being unreachable from Asterisk perspective. Also experienced 'not

Hello. I have a strange problem. Its not possible to pickup a call that was placed with a Siemens SL75 Wlan. When this phone calls an internal number and i try to pickup (*8) the call from my phone i get nothing. It seems i have the call for one second or so but after that the call is being cancelled. No problems with other phones (polycom, grandstream). Attached the complete sip debug log

Hi, Searching this list archives, I couldn't find a definitive answer to my question : how to send SMS to Gigaset phones ? My goal is to send Alert SMS such as "This phone system will be stopped in 5mn for maintenance" to every terminal (SIP phones and Gigaset DECT phones). (So at the moment, I'm not looking for way to send SMS from handsets). I could successfully send 1 short