similar to: Request for working config for DISA

You can do something like this: answer background(enter-number-wish-dial) Waitforexten(10) Dial({TECH}/${EXTEN} or Goto (outsidetruck,${EXTEN},1) where outsidetrunk is a context that checks te number and routes the call. ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jeremy Sent:

Hi Friends, I am facing a strange problem with DISA. I have installed and configured Trixbox. I've created a secret extension i.e., 555 and called this extension in Digital Receptionist using custom extension i.e., created in extensions_custom.conf file. When I call from my mobile phone to my PSTN number, which is connected to FXO port, my IVR is responding. After entering my DISA

Using an example provided by "The Hitchhiker's Guide to Asterisk", I made the following addition to my extensions.conf file: [inbound-analog] exten => s,1,Wait(1) exten => s,2,SetVar(counter=0) exten => s,3,Answer() exten => s,4,Wait(1) exten => s,5,DigitTimeout(15) exten => s,6,ResponseTimeout(10)

Hi, Firstly, what I'm trying to do is: * Get asterisk to pick up a SIP call via a DID * Prompt the user * When the user puts in a number, go to IAX.conf and route it according to what I've specified there, i.e Least Cost Routing, etc. I've set-up something similar to what I've found online, but it doesn't work! Asterisk doesn't pick up the call at all..... :( The files

Dear list, I have problems with DISA on an specific server with Asterisk 1.4.26.2. After starting DISA I can only press one key and DISA is jumping direct into the context without waiting for further digits. In dtmf.log I found this: [Nov 6 00:09:28] DTMF[2413] channel.c: DTMF begin '7' received on SIP/214-00d92db0 [Nov 6 00:09:28] DTMF[2413] channel.c: DTMF begin passthrough

Hey, this is happening to anyone who I try this with. We get into the DISA, then hear the dial tone. Dial 1 then start dialing the number, and it hangs up. I thought adding a wait time after the DISA may help, I was wrong. Here is what I have thus far in the DISA extentions. [DISA] exten => 7,1,DISA(no-password||"Scheda" <565> 455-1337) exten => 7,2,Wait(45) exten =>

DISA is currently disconnecting when I dial 8888 to access DISA. Below is my extensions.conf file from A@H and some lines which shows the disconnect. Should DISA be loaded as a module in modules.conf? When I do a 'show applications' i see that DISA is there. Help! -------------------------------------- ;Asterisk CLI as I placed a call from cell into the system. Playing

When I use DISA I get congestion when I try to reach 1-800-number: Here is the context: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US

Hi, I'd like to use DISA properly for my case - I'd like to handle it right, if user when in DISA doesn't dial any number - how does Asterisk return from DISA cmd ? I'd like to dial some default number if user doesn't dial anything or give him some message - but I don't know what gets executed after DISA if nothing is dialed .... I'm reading this on wiki, but

We are using DISA with local SIP users. The user enters in a 2 digit code then they get a dialtone and the phone dials out. The problem is that the calls waits 10 seconds after the outgoing number is dialed, no matter what I put for the timeout values. Anyone else using DISA that has run into this? exten => _2X,1,Answer exten => _2X,2,DigitTimeout(2) exten =>

Hi ! Did anyone had issues/managed to solve issues with DISA over Zap channels on * 1.0.X (STABLE) ? I have a situatuion where DTMFs that should be recognized in DISA work over SIP channels and do not work over ZAP channels (Zap channels are on TE110P) I have in default context: exten=> 299,1,DISA(no-password|default) and I have SIP extension 200 in [default] and I have Zap trunk which

Lists, ? ? Hi, good day, i was being task to create a DISA access for internal purpose of the company, i'm having a problem to work with it with authentication, but i think it's really a straight forward thing to do, can someone enlight me on this. thanks ? sample code snippet ? ???? exten => 5,Goto(inward,s,1) ? [inward] ? ?????????? exten => s,1,Disa(1234|outgoing) ?????????? ;

Hi I am using DISA to get my Polycom SoundPoint400 with H323 firmware to connect to * I have it working, but when I dial SIP end points there is no ringing tone on the phone. DISA gives dial tone but does not give ringing (if I understand correctly it is because it expects to transmit sound created by terminating side of the call) Is there a way to make DISA application to generate ringing

Is there any known reason that the DISA() routine should behave differently than WaitExten() as far as recognizing DTMF tones? If not, I suspect there's a bug here. Try it yourself--two DID's on our PRI, numbers below let you test each routine: It is my observation that some setups/phones DO and some DO NOT express this variance. --I could not show any variance on a sprint mobile phone

Here is some code to do authentication by caller ID for DISA through AGI. My original code had a bug in the Mysql query code, and there was a hangup in the wrong place [that's what I get for coding something at 2:00am], but the attached code works correctly. Take note of the REGEXP for the CallerID variable. When I tested the code from the PSTN it worked because there was no name component,

When using a SIP phone with Asterisk, hitting the # key (pound or hash depending on where in the world you happen to be) tells Asterisk that there are no more digits coming, and to put the call through immediately based on the digits already entered. This is the same functionality as the PSTN (at least in North America). However, DISA just sees the # as another digit, and therefore pressing #

hi all the help output for DISA ends like below, with the half-sentence 'Note that in the case' what's the rest of that sentence? The file that contains the passcodes (if used) allows specification of either just a passcode (defaulting to the "disa" context, or passcode|context on each line of the file. The file may contain blank lines, or comments starting with

Hi, I have just setup a DISA setup whereby people can dial in, authenticate, are given a dialtone and can then call out. Everything works however there is a 10 second delay after the user enters the number and presses #, until the system does anything. Here is the relevant section from my extensions.conf: -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi/ I am newbe in asterisk. I try to setup callback with Disa on my home server Anybody help me, pls

I can dial from an asterisk host to another one via FreeWorldDialup, on the other side DISA service answer to me and i can ear dialtone. But i cannot send DTMF and dial an extension on the DISA enabled asterisk.....i've tried rfc2833 and inband...but nothing....any tips ??? Thanks, -- Igor Barsanti GPG Public key available at http://pgp.mit.edu