Displaying 20 results from an estimated 7000 matches similar to: "Is this possible?"
2003 Oct 17
1
Asterisk in a rural project
We have working in a rural project and I have selected Asterisk. Because
* will work with a prepay system we need a precise answer supervision
for outgoing calls. The pilot system will have 8 trunks to PSTN. The
Telephone Company provides EURO BRI and analog CO trunks. On CO trunks
the answer supervision is reversal polarity. The village to be served
will be connected through a WLAN. Thus,
2005 Sep 08
1
TDM400P not detecting hangup and not hanging up
Canuck15,
No, I hadn't played with the gains. But I've now done so and no difference
unfortunately. Thanks for the suggestion though.
I have discovered that after Asterisk has answered the call and the remote
caller has hung up, if I lift the receiver on a phone connected to the line
(in parallel with Asterisk), Asterisk then DOES instantly hang up.
Would it be reasonable to assume the
2004 Dec 11
1
Problem with TDM400P and cidstart=polarity
I'm testing a TDM400P with FXO module to receive incoming calls from an
analogue line and send it to a SIP device.
To recieve callerid, I need to use cidsignalling=dtmf and cidstart=polarity.
The problem is that when a call is finished, the TDM400P seems to require
about 20 seconds to prepare for the next incoming call. If a new call comes
in within 20 seconds after the previous call was
2008 Oct 10
3
Got event 17 (Polarity Reversal)...
Can anyone tell me what this message means?
Got event 17 (Polarity Reversal)...
I'm running DAHDI 2.0 with a TDM401 card. Asterisk version 1.6.0.
It appears that I get this Polarity Reversal each time an inbound call
hangs up. This results in another ring, but no one is there. It appears
as an unknown caller, but I believe its a phantom.
Thanks,
Jim
[Oct 10 12:47:54] NOTICE[6669]:
2004 Jul 25
1
Busydetect problems
Hi guys.
I have a XP100P Clone , and the busydetect dont work for me..
PSTN---Asterisk---Sip---Asterisk----PBX
Any call from pstn side dont disconnect ... I have no disconnect supervision and busydetect dont work...
Please Help me.
Zapata.conf
[channels]
echocancel=yes
usecallerid=no
hidecallerid=no
rxgain=0.0
txgain=0.0
signalling=fxs_ks
callprogress=no
context=entrada
channel=>1
2004 Jun 15
0
TDM400P FXO problems
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi!
I live in Sweden and I am having problems getting asterisk to properly
detect when a caller hangs up.
And yes, I DO have disconnect-supervision on my line.
Also asterisk sometimes misinterprets the disconnect-signal as another
incoming call. This usually happens if I hang up first and then when
the caller hangs up, asterisk treats it as a new
2004 Jan 02
6
hangup detection
So I made the mistake of buying a Carrier Access channel bank without
noticing the page on the wiki about the fact that they don't support
disconnect supervision (bastards!). However, apart from that, I do have
it working fine for incoming calls.
Is there some trick to get asterisk to detect the hangup tones from
SBC? I've tried busydetect and callprogress as suggested, but neither
2010 Mar 20
1
how to start callerid for india
i belong to india. i am making pbx using sangoma
fxo card. i want that when ever call comes to my PSTN line i should see
the no from where call is coming. so i have to configures
chan_dahdi.conf according to my region. i checked dahdi.conf and in
that they have mentioned for india
2005 Oct 03
2
Hang-up Detect - Yet Again
I realise I am not alone in this, but I don't seem to be finding many
solutions.
I am running a CentOS box and * 1.09 with a TDM11B (1xFXS/1xFXO).
Everything works great accept hang-up detection of incoming PSTN calls.
* answers the call, but if the incoming caller hangs up, * does not release
the line.
I have determined the following information about my line:
When On-Hook line voltage =
2008 Mar 20
1
polarity in zapata.conf
hi:
In my zapata.conf i have 4 fxo configured channels,for fxo number 1 to 3 i added polarity reversal property but for fxo number 4 i didnt add polarity reversal property but it still giving me on cosole that fxo number 4 is polarized (because the line on fxo number 4 is not polarized).
what i want to do is to not let polarity reversal take effect on fxo number 4.
that what i have in my
2011 Jan 05
1
Polarity Reverseal....with analog line
Hi !
I ma having trouble with my PTSN line. When I call to my asterisk I get this..
-- Executing [s at from-pstn:3] Hangup("Zap/5-1", "") in new stack == Spawn extension (from-pstn, s, 3) exited non-zero on 'Zap/5-1' -- Hungup 'Zap/5-1' -- Starting simple switch on 'Zap/5-1'[Jan 5 12:45:06] NOTICE[2893]: chan_dahdi.c:6869 ss_thread: Got event 17
2008 Jul 14
4
Zaptel problem with pots lines
Hi,
I'm trying to get up and running a TDM400 with a standard italian pots
line but i'm having
problems at getting asterisk to detect when the line get answered on
outgoing calls.
I'm using asterisk 1.6 beta 9 with zaptel 1.4.11.
I tried with and without answeronpolarityswitch=yes but it didn't change
anything at all.
With callprogress=yes answer get never detected.
With
2007 Jul 20
2
Problem
i am have x100P clone, and install asterisk 1.4 and out call normaly and
hangup in xlite to zap but call to asterisk for zap channel nop pass to
xlite and the caller hangup the asterisk not detect.
what is the problem ???
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070720/39d4c1e8/attachment.htm
2008 Feb 06
1
FXO modules and polarity reverse
I would like to know if any body tried to connect gsm gateway with polarity reversal to fxo module at asterisk server ,and if the polarity reversal solve the problem of the answer and hangup supervison on calls .i appreciate any help.Thanks in advance;Wassim
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's
2005 Jun 08
2
Station Lines
I am not sure if this is really possible but I figured I would ask
anyway. I have a customer who wants an asterisk system. Currently they
have a BizFon system.
The feature that he really wants is to be able to pick up any line and
have all the stations show up on his phone. Is this possible in
asterisk? If so can someone point me in the right direction?
Sean
2004 Apr 02
7
Welltech FXO: initial tests
Hi,
After a long way of problems (shipping, customs, etc) finally I got
Welltech working. Here below my comments.
- The documentation is poor and have errors
- The web configuration is not complete. However is useful for the basic
configuration parameters. The command line is necessary for modify all
parameters.
- The software upgrade is easy. Initially the gw came with H323, we
upgrade to
2005 Jun 05
2
TDM400P Polarity reversal detection
Hi
Can TDM400P detect polarity reversal on FXO module?
We have C.O. lines that reverse polarity on Answer and release.
Thank You
This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you
2010 Apr 06
2
polarity reverse
Hi,
I have a problem with polarity reverse
this my dahdi config
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
2004 Dec 08
3
CPC, Calling Party Control, Disconnect supervision, -- how to tell that to Verizon (east coast)?
> >
> > I would be grateful if anybody could tell me what I should
> > tell Verizon
> > in NJ so they would enable "disconnect supervision" for my lines.
> >
> > Apparently "remote hangup notification" or "disconnect
> supervision" or
> > "calling party control" is NOT the magic phrase for them. Although
>
2004 Oct 06
0
Can Asterisk provide Answer Supervision signalling to a channel b ank via T1?
I have an older Newbridge Mainstreet 3624 upon which I'm terminating some
analog DID lines. They are effectively loop-start trunks with battery
supplied by me (ie. FXO) and consumed by the serving central office. One
major part of DID is the requirement for providing Answer Supervision in the
form of battery polarity reversal on the analog trunks. Without it wierd
things start happening, like