similar to: Monitor Zap Status - Full E-mail...

I've installed Grandstream GPX-2000 phones and have successfully enabled one of my buttons to use Asterisk BLF for an extension. I can tell when this extension is available, is being rung, or is on the line. I'd like to do the same for my Zaptel channels, to be able to see when a line is onhook, ringing or offhook. I tried the following but alas, it doesn't seem to be working:

Hello, I configured both asterisk and grandstream 2000 accourding to howtos on the web.. And everything seems working fin. But if i reload asterisk grandstream stops working with BLF. I need to restart the phone to enable BLF again. Any clues??

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

I am trying to allow users to place outgoing international calls from a GPX-2000 with "early dial" enabled, connected to Asterisk 1.2.12.1 I have the following extension line: exten => _011.,n,Dial(${TRUNK}/${EXTEN:${TRUNKMSD}}) When I attempt to place a call to a number in, for instance, Kenya, I dial "011254"...etc. and I get this on the asterisk console: Executing

Today is a strange day. My asterisk server is suddenly saying that all extensions are on hold. All my hints are like this: -= Registered Asterisk Dial Plan Hints =- 4101 at hints : SIP/4101 State:Hold Watchers 0 4100 at hints : SIP/4100 State:Hold Watchers 0 4002 at hints

https://www.google.com/earth/download/ge/agree.html Cameron On Tue, May 30, 2017 at 4:09 PM, Alice Wonder <alice at domblogger.net> wrote: > At one point in time I wrote a script that converted gpx to kml so I could > view them in Google Earth but it's been years since I did that. > > I don't know if Google Earth for Linux still exists. > > > On 05/30/2017

Are all of the sip phones in the same context? > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Robert Jenkins > Sent: Tuesday, January 16, 2007 1:44 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: [asterisk-users] Polycom IP601 - some hints working,

Hi, I configured Buddy Watch function on my Polycom IP 601. It works well, until I make a reload of Asterisk. After reload, if I give the "show hints" command in Asterisk's CLI, it says that there are no watcher for the extensions that I configured. Before the reload in the CLI appears: -= Registered Asterisk Dial Plan Hints =- 3002 : SIP/3002 State:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! Are hints not yet implemented in res_jabber? I have this here: exten => 3000,hint,gtalk/gtalk_account/mari.xxxxxxx at gmail.com But the hint doesn't show any difference. It always shows online on the phone and core show hints always shows that: 6003 at internal : SCCP/6003 State:Unavailable Watchers 0 6002 at internal :

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

Hi all, I've just updated to current CVS, and have 2 polycom IP phones, one is a IP600 and the other is a IP300. The IP600 shows the status of the IP300 and a ZAP line quite nicely, but the IP300 won't show the status of the IP600.... Is there any additional debug apart from "show hints" to see why this might not be working ?? -= Registered Asterisk Dial Plan Hints =-

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

I have a Garmin 78s marine GPS receiver and it stores tracks in GPX format. This is an XML encoded set of points giving longitude, latitude, time and sea depth. Garmin support viewing this via their Garmin Express product, but there only seem to be Windows and Mac versions. I've emailed them and await a reply. In the mean time, does anyone know of any Linux products that will emable me to

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

Group I'm having trouble getting hints to work correctly using SVN-branch-1.4-r59289 I have hints working on several other systems but I must be missing something this time around. VoIPGW*CLI> show hints -= Registered Asterisk Dial Plan Hints =- 30@default : State:Unavailable Watchers 3 29@default :

Hi all If I have the following in my dialplan: exten=>25001,hint,SIP/25001 Doing a core show hint 25001 results in 25001 at local : SIP/25001 State:Idle Watchers 0 1 hint matching extension 25001 in the Asterisk CLI. What does the Watchers 0 mean? I use the hints table output via core show hints for logic in my dialler application - but

Hello List, Asterisk CLI command "core show hints" gives the list of hint extension configured and its presence status. In command output there is a field called "watchers" and it contains a numeric value of number of subscriptions' registered for that particular extension. So, is there any CLI command to check who the watchers for an extension are? Regards, Rajib Rajib

I've got hints setup for my MeetMe conferences like so: exten => _60X,hint,MeetMe:${EXTEN} and they show up in "core show hints" like so 600 at dialtone : MeetMe:600 State:Unavailable Watchers 1 _60X at dialtone : MeetMe:${EXTEN} State:Unavailable Watchers 0 I'm wondering why they're Unavailable instead of

Ishfaq Malik <ish at pack-net.co.uk> schrieb: > BLF is an interaction between the phones and the server. You need to > configure function buttons on the phones to display the presence state of > individual peers that have been set up on the server. > > This command in the asterisk cli will help you: > > core show hints > > If you see an entry for the peer then

Hi All, I''m having a problem with a simple file upload page. I''ve narrowed it down to the enctype attribute of the form tag. Here''s my form: <form action="/app1/gpxdata/upload_gpxfile" method="POST" enctype="multipart/form-data" > <input type="file" size="50" id="gpxfile" /> <input