similar to: Setting the CallerID

Hi All, Maybe someone knows this, im using dahdi in combination with a TDM400, where 2 analog PSTN lines are connected. The weird thing is tho that when someone calls the analog lines it goes perfectly fine, the line comes in and all works ok. Except: Sometimes the callerid from the caller is not the complete number, but only a few random numbers from that phonenumber, and sometimes its complete.

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

Hello, We're having some issues with CallerID and I thought someone here might be able to shed some light as none of our carriers seem to know what I'm talking about. The issues is this: A client of ours uses an after-hours voicemail service as mandated by their corporate office. We have a Day/Night setting that lets them turn this on and off. A call comes in from one of their

Hi I wonder whether anyone got the Sipura ata 3000 to decode British Telecoms callerid and pass it to asterisk? The userguide seems to suggest that this is not possible, is that right? Conrad

I've recently noticed some oddities in my CDR records. In some cases the original CallerID that I've set in the .conf file for the extension showed-up in the CDR as the originating extension (on Zap/ devices on the channel bank), and in other places it was the one that I set using Set(CALLERID(num)=<something>) (SIP/ devices). Digging around a little in the source (and doing some

Would be nice to do both (type 2 and 3 I believe in Oftel terms), but I'd accept just our DDI if that was all I could get. Steve -----Original Message----- From: Storer, Darren [mailto:starusers@comgate.tv] Sent: 01 July 2004 09:35 To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per extension outbound callerID Hi Steve,

Hi, Is anybody in the UK using Telewest as a PRI Telco provider? Are you sending them caller ID? I've been told by Telewest that:- 1. Oftel doesn't allow them to accept caller ID (this is rubbish, and I replied pointing out where in the link to Oftel that they sent me it was stated. We need Type 2 caller ID) 2. Telewest can't do this. (this is rubbish, I'm certain

Hi, I am using phpagi for agi scripting. and want to update callerid number but didn't get any success. please help me how to update PHPAGI is new for me. Below is the code which I write. #!/usr/bin/php -q <?php set_time_limit(30); //require(.phpagi.php.); include("phpagi.php"); $agi = new AGI(); //answer the call $agi-> answer();

Hi, ? I run the program testcall with one E1, it works fine; I receive DNIS and ANI for making calls and answering calls. ? When I start the Asterisk I receive call from outside correctly including DNIS and ANI, and receive the following messages: ? Sep? 7 10:29:59 WARNING[12167]: Answer Call Sep? 7 10:29:59 WARNING[12167]: MFC/R2 UniCall/2 Call control(5) Sep? 7 10:29:59 WARNING[12167]: MFC/R2

Hi All, as good? I am trying to make a call for the Unicall channels and after the exchange of signalling and sending of the digits asterisk locks up with the sending of the signalling "E" and the TELCO says that asterisk would have to send signalling "F", as to make for asterisk to send signalling "F"? The TELCO says that the signalling "E" is

Hello everybody, i'm from Mexico, at the time i?m working on a production server with asterisk 1.2.25 + spandsp-0.0.4 + libmfcr2-0.0.3+libsupertone-0.0.2+libunicall-0.0.3 and zaptel-1.2.22. I installed this version of astunicall that i downloaded from http://www.moythreads.com/astunicall/ Everything works fine, i'm able to make outgoing calls and recive incoming calls with all ANI and

I have a 'time and attendance' application. Think janitorial or security kind of thing where an employee goes from location to location. They're supposed to 'clock in' when they get to a site using a phone at that site to prove they're there. Some employees have discovered 'fake caller ID' services can be used to say they're on site when they are not. How

Hi All, My research indicates ANI is not really supported with SIP Channels or passed between SIP servers, even with setting function CALLERID(ANI). So the only place this applies is on PRI interfaces, when sending calls out a ZAP PRI you can set the ANI to whatever and CID Number to a different whatever so on the other end of the PRI you will receive the two different values? Is this correct or

Dear Steve and *.* e1r2 developers and users, now MFCR2 is successfully installed! many thanks for your help. I'm living in Argelia. I have configure my MFCR2 according argentina R2 settigs. (look at the end of the message) the testcall run perfectly (only warnings and I think that is just debug). but I have many problems and when I run Asterisk-MFCR2, generally in the begging no errors

OK I am going to do it again. Global Crossing is now sending ANI but it is not in the format I expected. Any one know of a way to get this data into two seperate variables? The first number is ANI and the second is DNIS so it is "*tendigits*tendigits* on one line like below. < Called Number (len=26) [ Ext: 1 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan

Hello All, I'm having problems with international calling via Global Crossing. I'm told I need to send a true ani versus a sudo ani. What is the difference and how can I configure asterisk to do this. Global Crossing is denying calls with sudo anis. Thanks, Keith

Good Day list, Need assistance determining the best place to read up on whether Asterisk can help me out. I have a situation where I need to do the following <PRI from Telco> ------- <Analog Channel Bank>------------<Proprietary Box> | | | | | | <PRI Port 1 of Digium Quad T1> <PRI Port 2 of Digium Quad T1> | | | | | |

I've got an interesting problem. I just recently upgraded an asterisk server from a may 9th cvs to a 9/29 cvs. When I did the upgrade I was unable to place calls through the PRI. The calls would process fine, but the provider would reject the call and send me a cause 69 or 77 failure code "Unallocated (unassigned) number". Upon contacting the provider, they told me I was

Hi, I have three R2 installation on different carriers, all shows the same inconsistency at varying degree. But, on most test calls we made, it reaches T3. The worst part of these, the carrier claims that it's my R2 box that is not responding in time. Please, check the attached file and take note of the timestamp, you'll find that in some call, it already contradict what the carrier

Due to time constraints, I'm looking to pay someone (by paypal) for a working or/almost-working asterisk skeleton of the examples listed below... SYSTEM INFO: ---------------------------------------------------------------- I will have a single channelized T1 with all lines being available for dialing in, using E&M wink, with ANI2*ANI*DNID being sent to me (as DTMF tones I guess?). I