similar to: Help with latest Asterisk on latest Debian

Hi all, I have now reinstalled my whole system because I had to change a few things wiht my drives. Here is what happens. I have done apt-get build-dep asterisk apt-get install linux-headers-2.6.17-2-686 which works just fine now. Downloaded the latest files from digiums ftp. First I unpacked zaptel. I am doing everything as root. Then I just type make. Here is what happens: checking for gcc...

Hi, i'm trying to install a compatible modem to act as a X100P, and i would appreciate some help here, this is what is hapening when i modprobe zaptel: # modprobe zaptel FATAL: Error inserting zaptel (/lib/modules/2.6.11-6mdk-i586-up-1GB/misc/zaptel.ko): Invalid module format firstly, i did: 'make clean' then 'make linux26' and then 'make install' into zaptel

Hi all, Since i cant get latet beta of zaptel installed on the latest test version of Debian with kernel 2.6.17-2-686 can someone who is using debian give me some tips on how to get it working and installed? Many thanks, Christian

Hi all, I'm pretty new to linux and compiling modules, but I've scoured the web for help on compiling the zaptel modules from source and I get the following error... make -C SUBDIRS=/usr/src/modules/zaptel modules make: *** SUBDIRS=/usr/src/modules/zaptel: No such file or directory. Stop. make: *** [linux26] Error 2 Any ideas? /usr/src/modules/zaptel is the dir I'm

I am (unsuccessfully) trying to install zaptel (incl ztdummy - I don't have any Digium hardware) on CentOS 4. uname -r 2.6.9-42.ELsmp Not sure how this relates to 2.6.9-42.0.3 (see below) ln -s /usr/src/kernels/`uname -r` /usr/src/linux ln -s /usr/src/kernels/`uname -r` /usr/src/linux-2.6 cd /usr/src/zaptel-1.2.11* make linux26 You do not appear to have the sources for the 2.6.9-42.ELsmp

Hi i followed this instructions for installing ztdummy on a 2.6 kernel (taken from http://www.voip-info.org/wiki/index.php?page=Asterisk+timer+ztdummy ) cd /usr/src/zaptel * READ /usr/src/zaptel/README.udev and follow the steps * check modules on: /etc/sysconfig/zaptel> if you have no digium hardware comment out all modeules except ztdummy. - make linux26 - make install -

Hello, I am trying to install a Billion ISDN on Asterisk I have Debian Etch and I installed theese packages: apt-get install linux-headers-`uname -r` apt-get install make apt-get install ncurses-base ncurses-bin ncurses-term apt-get install libncurses5 libncurses5-dev apt-get install bison apt-get install openssl apt-get install libssl0.9.8 apt-get install libssl-dev apt-get install

I keep running into the dead end that it can't find config.h in the source tree. It looks like newer kernels don't use it anymore. Someone ran into this awhile back when compiling 1.2 and it looks as though the issue was never resolved. Any ideas? Last time I tried this, I was on fedora core 5 64bit and all went well. It's not working on this newer setup Any ideas on what I can do

Hi, I'm having trouble compiling zaptel 1.4.4 on SUSE 10.1. I'm really only interested in getting ztdummy to work because this is a dev machine with no zaptel h/w. SUSE 10.1 is a 2.6 kernel: asterisk-dev:/home/hugh # uname -r 2.6.16.13-4-default It seems that my problem is related to autoconf.h - I cannot find that file: asterisk-dev:/home/hugh # find / -name 'autoconf.h'

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

I have several servers using ztdummy as the timing source, some CentOS 4.x, some CentOS 5.x, some Asterisk 1.2.x, some Asterisk 1.4.x. "zap show status" differs between the servers: ZTDUMMY/1 (source: Linux26) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 (source: RTC) 1 UNCONFIGUR 0 0 0 ZTDUMMY/1 1 UNCONFIGUR 0

I hope someone can offer me some help with this. Basically, the current CVS version of Zaptel will not compile under Fedora Core 4. I have closely followed the directions in http://www.voip-info.org/tiki-index.php?page=Asterisk+Fedora+Core+3 using the versions given in the FC4 distro with no luck. Here's the output when I run "make linux26". Any help would be great. TIA.

Hello! I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 -- all give the same error) with 2.6.19 kernel CC [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o In file included from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26, from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28:

Hi list, I install dahdi-linux successfully with the module of oslec for the echo, but when I specify it in the system.conf the echo canceller oslec it shows me errors: DAHDI_ATTACH_ECHOCAN failed on channel 4: Invalid argument (22) I see that the echo cancellers is supported: mg2, kb1, sec2, and sec because oslec is not supported?, but he has support to compile it with dahdi_linux! best

Hi Guys Im trying to complile Asterisk on my new dual Xeon 3.0ghz EM64T machine. Im running Debian 3.1, and have installed the 2.6.8-11-em64t-p4-smp kernel (and headers). The system is working fine and is detecting both CPU's (4 actually, with hyperthreading). But when I try to compile Zaptel, Im getting this error: /lib/modules/2.6.8-11-em64t-p4-smp? /build make -C

Hi, I am looking for a TFTP server that is easy like the tftpd32 for Windows that I have been using. Just want to start it with a command and my Cisco can connect and retreive the config files from it. Many thanks, Christian

I tried to test Asterisk 1.4 on FC6 x86_64. I have it working on FC5 x86_64 very good, but since FC keeps updating, I tried to follow newer kernel versions. I can't pass the zaptel compilation. Everything is OK, but when I finished, and tried to load it, allways got module not found when I run modprobe zaptel, and modprobe ztdummy. I already tried to modify is with the sed 1 option but

While trying to compile zaptel 1.2.8 on a FC5 I get the following error: /lib/modules/2.6.19-1.2288.fc5smp/build make -C /lib/modules/2.6.19-1.2288.fc5smp/build SUBDIRS=/usr/src/zaptel-1.2.8 modules make[1]: Entering directory `/usr/src/kernels/2.6.19-1.2288.fc5-smp-i686' CC [M] /usr/src/zaptel-1.2.8/zaptel.o In file included from /usr/src/zaptel-1.2.8/zaptel.c:40:

Again trouble compiling bristuff-0.3.0-PRE-1q with the florz patch on a x86_64 box (I guess nobody is using x86_64 platform or is able to fix this themselves?) First of all when bristuff is downloaded and compile is started it appears that the bristuff Makefiles are badly broken. The asterisk Makefiles all do see to find the kernel sources on a RHEL4 box in the proper directory, the pure

Hi, All How do I install Zaptel drivers on a system running Suse? Make results: grep: /lib/modules/2.6.16.13-4-smp/build/include/linux/autoconf.h: No existe el fichero o el directorio make[1]: Entering directory /usr/src/asterisk/zaptel/zaptel-1.4.0-beta2 make -C /lib/modules/2.6.16.13-4-smp/build SUBDIRS=/usr/src/asterisk/zaptel/zaptel-1.4.0-beta2 modules make[2]: Entering directory