similar to: My first Asterisk - Not recognizing X100P clone

The SM56 MODEM manual says it does. But when used with zaptel 1.2.12, nothing shows up. Yuan Liu

Hardware is an SM56 card (X100P clone). When the line hangs up, ztmonitor displays full bar (or whatever maximum allowed by rxgain) in RX. It only drops zero when the line picks up (and remote was silent). Is this something of concern? The zap channel seems to work despite echo. Additionally, what's the objective of tuning with ztmonitor? I mean, what would indicate an optimal level?

Hi All, Googling X100P Clone I found several information about these cards and seems that some winmodem has the same chip used from the original X100P. Here below a list winmodem which should work as X100P clone: 1057 Motorola 5608 SM56 PCI Fax Voice Modem E159 Tiger Jet Network Inc 0001 Tiger 300/320 PCI interface I bought one "Trust 56k V92 PCI Internal Modem MD-1100" which has the

Hi, Anybody lucky with this config inside an Asterisk server for dealing with FAX ? FXO_LINE ----> ASTERISK 1.4.2 ---> IAXMODEM ------> HYLAFAX TDM400P ZAPTEL 4.3.1 1 FXO port 1.41 ------------------------------------------------------------------------ I know Fax is not officially supported on TDM400P cards but I did not expect not being able of sending one

Asterisk is becoming familiar to me, like getting a few friends after moving to a different town, but I have had problems with modems from the getgo on this. Originally I wanted to do a voicemail system, but now I'm reading more and more that excites me to use this setup and or add to it. I started out with a USR 56k voice/internal that supports 4bit 8Khz voice playback only to find that I

My SM56 (Motorola X100P clone) has echo as hight as 38%, according to fxotune -d. But when trying to take action, it fxotune simply says it can't. ./fxotune -i3 -vvvv Running with parameters: doset=0 docalibrate=1 dodump=0 startdev=1 stopdev=252 calibtype=2 waveformtype=-1 delaytosilence=0 silencegoodfor=18

Hi everyone, I am running X-Plane under wine, but the joystick input is ignored. Is there anything special I need to do in the wine setup to have the joystick recognized. My joystick is a USB Logitech Wingman Extreme 3D, and it works normally under other Linux applications. Richard -------------- next part -------------- An HTML attachment was scrubbed... URL:

So I took a chance with an X100P knock-off on eBay. I'm running Asterisk + FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel 2.6.16.16. Everything has been fine up until now. I compile the 1.2.5 Zaptel drivers without a problem, get the udev configuration in, modprobe zaptel, and finally modprobe wcfxo. At this point, I get the message: ZT_CHANCONFIG failed on channel

https://bugzilla.netfilter.org/cgi-bin/bugzilla/show_bug.cgi?id=40 laforge@netfilter.org changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEW |ASSIGNED ------- Additional Comments From laforge@netfilter.org 2003-02-03 16:49 ------- We haven't seen this

Hi, Thanks for giving me a detailed reply on hardware needs steven. I have been looking at the archives in detail and found a few people have had problems with zaptel compilation on suse(kernel-source-2.4.19.SuSE-342 // gcc 3.2.2 ) ... is shifting to red hat the only viable scenario...would be a pain cuz suse comes with sun java desktop system( just bought it !! ) ... any fixes would be a

Just started getting this. I tried the following by adding it to my etc/sysctl.conf: net.ipv4.neigh.default.gc_thresh1 = 4096 net.ipv4.neigh.default.gc_thresh2 = 8192 net.ipv4.neigh.default.gc_thresh3 = 8192 net.ipv4.neigh.default.base_reachable_time = 86400 net.ipv4.neigh.default.gc_stale_time = 86400 That pretty much locked things up. Then I tried another googled solution: echo 256 >

OK please try the following patch [PATCH] neighbour: fix a race in neigh_destroy() There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue Convert all skb_queue_purge() calls to the __skb_queue_purge() variant Use

Hello people, Went to IRC and zoa helped a bit by saying me to Do a insmod zaptel and insmod wcusb When I did the insmod zaptel it worked fine, but when I did the wcusb it said asterisk:/usr/src/zaptel# insmod wcusb Using /lib/modules/2.4.24/misc/wcusb.o /lib/modules/2.4.24/misc/wcusb.o: unresolved symbol usb_submit_urb_R3d6f870e /lib/modules/2.4.24/misc/wcusb.o: unresolved

I'm wondering how I can let the caller choose to leave a voicemail message or continue to wait. Of course I can leave the queue and let the caller go back to the queue is he/she decides to stay waiting. But then they are new in queue again. How can I make such a menu where the caller keep their number in queue ? Thanks, Poul

Dear Dr. Bivand and R-users, I have a 5 by 5 grid, say, location[1:5,1:5], and I want to know the indices of 8 neighbours of each cell. For example, for location[2,2], its neighbour coordinates are [1,1:3], [2,1], [2,3] and [3,1:3]. Sometimes I also need to remove edge effects (torus = TRUE). I have tried "cell2nb" function in your spdep package. Here's my example: > neigh

Hi all, this is another post about this problem. I installed from scratch a new Suse Linux 10.0, with latest stable asterisk. Moreover I add the lines to /etc/udev/rules.d/50-udev.rules, in order to let the driver create the /dev/zap....... When I plug into usb port my TigerJet adapter, I see on /var/log/messages Feb 24 14:55:02 srvlnx05 kernel: usb 1-2: new full speed USB device using

I have the dev kit lite installed, and after compiling and installing asterisk, I've become a little confused about how and when wcfxo and wcusb are loaded. When ever my box is done booting, the wcusb module is loaded, but the wcfxo module is not. Further, even though my startup notices say that asterisk started OK, it is not running by the time I log in and do a ps. First, where are the

>From - Received: from rwcrmhc12.comcast.net ([216.148.227.85]) by sccrmxc11.comcast.net (sccrmxc11) with ESMTP id <20031014185753s1100nos46e>; Tue, 14 Oct 2003 18:57:53 +0000 Received: from rwcrmhc12.comcast.net (localhost[127.0.0.1]) by comcast.net (rwcrmhc12) with ESMTP id <20031014185753014006qmtie>; Tue, 14 Oct 2003 18:57:53 +0000 From: Mail Delivery Subsystem

Hi All, I'm compiling zaptel. Did the usual ./configure, then make. Compile breaks saying: ---------------------------- /usr/src/zaptel-1.4.5.1/wcusb.c:1451: error: unknown field ?owner? specified in initializer /usr/src/zaptel-1.4.5.1/wcusb.c:1451: warning: initialization from incompatible pointer type make[3]: *** [/usr/src/zaptel-1.4.5.1/wcusb.o] Error 1 make[2]: ***

Hello, I know that there are devices which are not working with arp. For example, the loopback device. I was wondering whether it is possible to create neighbours in a NUD_NOARP state; so that "ip neigh show" will show such neighbours where their state is NUD_ARP. I made some tests with the loopback device , but could not find such a way to cause it to appear as NUD_NOARP. Also if I