similar to: Voicemail help

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

Hello all, I have seen some people asking how to configure asterisk to work with h323 but i did not manage to do fix it yet (i am not an asterisk expert). Can someone help me configuring asterisk? It is already compiled asterisk 1.4.5 with H323 support. Everything looks fine. Then i understand i need to configure several files: -sip.conf -ooh323.conf -extensions.conf do i also need to configure

I have searched and searched for over a week on this but can't seem to find the issue. Calls from CallManager to Asterisk are being disconnected immediately. I have setup CallManager and Asterisk per Shaun Ewing's pdf http://asterisk.edropbox.net/ccmasteriskvm.pdf I have installed Asterisk 1.4.0-beta3 on Fedora Core 5. I got libpri, zaptel, and asterisk compiled and installed.

anybody successfully running asterisk-callmanager scenario with h323 trunk (ooh323 channel driver in asterisk)? I'm using 1.2.12.1 & ooh323 from 1.2.4 add-ons, but seems, that ooh323 is ignoring dtmf digits from callmanager h323 trunk setup with chan_h323 is working fine with dtmf I tried all possible modes with ooh323, but without success, with chan_h323, I'm using default (rfc2833)

Hi Users, Administrators and Pavel Jezek, You prefer chan_h323 from asterisk tree and it's of course that use channels by tree is very good. But in 1.2.x, the chan_h323 is very simple and the chan_oh323 is so bad. And I work with chan_ooh323, that it's too from Digium and work good! And I am Studing one possible change to Asterisk 1.4.x , but in 1.4.x the oh323 channel don't have more,

OOH323 Debugging Enabled -- Executing Answer("SIP/3513-090f7d40", "") in new stack -- Executing Wait("SIP/3513-090f7d40", "1") in new stack -- Executing DeadAGI("SIP/3513-090f7d40", "a2billing.php|1") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php a2billing.php|1: line:58 - IDCONFIG : 1

Hi Siggi, > > 7960 and then "Call Ended" on the Display (curious about that !!!). > > That seems to be normal for the 7920. I've sniffed the registration > procedure with Cisco's newest 3.3(3) CallManager (+patches), and it's > doing the same thing. Maybe that's some odd way of testing if the > CallManager ("CCM") really works... >

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Hi, Where can I find information on H.323 for Asterisk and/or integration with Cisco CallManager in particular? <http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration> I have oh323 working on Asterisk. Since the CallManger I am working with is running 3.3.3 I cannot use SIP... Thanks, Adi

* compiled from cvs, i am trying call ip phones in callmanager 3.2 10.17.0.2 is my callmanager i noticed from network dumps that instead of sending rtp to the ip phone, * sends it to 10.17.0.2! thereby causing no audio from * to ip phone. audio from ip phone to * is ok. only callmanager calls fail. netmeeting works ok... here is the debug, thanks for any info ~kelvin H323 debug enabled --

Hi..... I have just successfully setup Asterisk with 2 Cisco 7940 phones (converted for SIP) and a SIP softphone on a W2K box.....and it all seems to work very well.....to those who wrote this software, it is really cool. Anyway, I am new to this software, and I have a lot of questions which I am hoping someone on the mailing list might be able to answer for me.....I am basically trying to

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

Hello, I have Cisco CallManager 3.3.4 and Asterisk@Home latest version. I have earlier tried getting Asterisk to register with CCM via H323 and failed. Back then, I learned that this is a known bug in Asterisk. Also people who tried doing that had also succeeded in getting calls to go through only one direction like from CCM to Asterisk. I am not that expert so excuse my ignorance with this

Hi! I'm trying to communicate a Cisco CCM 4.0 with Asterisk 1.2.11, I 've followed the info in http://www.voip-info.org/tiki-index.php?page=Asterisk+Cisco+CallManager+Integration but still not able to make Asterisk communicate with Cisco. I keep on receiving --- SIP/2.0 400 Bad Request - 'Malformed/Missing URL' --- and --- SIP/2.0 404 Not Found --- messages

Hi, I'm trying to make ooh323 works with one asterisk box running 1.2.15 version. I can ring from a h.323 to SIP and SIP to H.323, but when the call is finished when the phone is answered. This is the log when I call from the H.323 device to a SIP device: Feb 23 10:57:32 VERBOSE[6096] logger.c: -- Executing Dial("OOH323/Telconet Mantaer-c5f8", "SIP/666|30|TtrwWC")

Hello! I need to use n-way call as it described here: http://habrahabr.ru/sandbox/52259/ It is in russian, but dial plan is quite clear. It works in asterisk 11: -- Blind transferring OOH323/7272-6385 to '0' (context fromtransfer) priority 1 -- Executing [0 at fromtransfer:1] NoOp("OOH323/7272-6385", "") in new stack -- Executing [0 at fromtransfer:1]

Can someone tell me how I can configure ooh323.conf to accept call from h323 gateway (only the authorized h323 gateway) to my asterisk. I will be glad to know how this can be done. I tried the setting as in ooh323.conf [abcd] type=user context=default ip=62.193.1XX.2XX disallow=all allow=gsm allow=ulaw this gateway can make call, even if these lines are commented out and you restart the

2013/3/29 Julian Lyndon-Smith <asterisk at dotr.com> > check out the endbeforehexten option in cdr.conf > > this needs to set to "yes" > > Julian > Unfortunately, this doesn't help. Let's drop the hangup handler at the moment, and focus on the "saving to file" part. Then my issue is I can't update CDR value is hangup exten. Here is a

Does anyone know how to customize the order of the soft keys on a 7960 running SIP? All the documentation I could find is CallManager related. Specifically, I want to move the transfer function to the first set of buttons during a call.