similar to: rxfax problem

Dear folks, I have problem in fax reception. The astrisk detects the fax tone and jusmps to the fax extension and rxfax application starts and the max machine starts the fax but saddenly stops and seems the rxfax have died. It doesnt returns, not files in the output dir and .......... Anyone have any idea or help how could i get whats wrong here. Regards. M. Shokuie Nia

Dear Folks, Anyone knows if Sangoma supports or going to provide support for battery removal detection on FXO lines?? As Tzafrir said earlier DAHDI supports it, which is a very nice feature but what about Sangoma? Regards. -- M. Shokuie Nia. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi Everyone... I am running Asterisk 1.2.22 on Debian "Etch". I installed it from sources. I have also installed tiff-v3.6.0, spandsp-0.0.3. and downloaded http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_rxfax.c http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_txfax.c and a Digium TDM card with 4 FXO ports When my dialplan

Hey All, I am attempting to get the RXFax app working and having a hell of a time of it. I am hoping that some of you fine folks can help me out. I have installed Asterisk v1.2.14, SpanDSP v0.0.2pre26 and app_rxfax. All compiled and installed fine. When I attempt to call the extension I have created for receiving fax's then I get the following error once just as the rxfax

Hello, I recently switched over to using Mixmonitor versus Monitor to see if it would clear up some warble that I was getting in my recordings. It did indeed clear that up, but a new problem was introduced. The recordings for no reason will just end abnormally. There is no rhyme or reason as to when they will end, but usually after a minute or so. Here is my current setup. Asterisk v. 1-2-0rc2

I just want to pdf and email faxes coming in over pstn on a TDM400P. Outgoing faxes would just go out over pstn, not through asterisk. All the voipinfo , etc, howto's are quite complicated. And most use third party apps like Hylafax. I thought there was a rxfax and txfax in 1.4. And 1.6 had app_fax. I'm now using 1.4.22, but I'd go to 1.6 if it made this easier. But I've

Hi, I noticed a strange behaviour: Faxing using spandsp (TxFax) from my asterisk box to my old, common fax machine at home works fine. Faxing from the same box to my office pc-fax (Hylafax) also worke fine. Receveiving faxes on my asterisk box using spandsp (RxFax) also works fine. It is a PSTN number connected to the digium card of that asterisk box. Then I faxed from my asterisk box (TxFax)

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many

I'm using Slackware 11. I unistalled the package that provides libtiff 3.8..... and installed the most current 3.7.... for lib tiff. I downloaded asterisk 1.4 beta3 and the 1.4 beta2 addons and untared them. created a simlink: ln -s asterisk-1.4.0-beta3 asterisk I've compiled spandsp from as follows cd /usr/src wget

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

Hello. I just emerged spanDSP with all the packages needed. After a bit of configuration i was read to test. But i get this errormessage stating that application rxfax was not found. I could't fint rxfax i teh modules directory. I use asterisk 1.0.7. I did reset the server after emerging SpanDSP I use gentoo kernel 2.6 I don't know what else to do. Regards, Arne Morten

Scott's SpanDSP FAQ mentions that the senders' TSID (20 bytes sent by sending fax machine) is made available, but doesn't mention where or how. Is there a variable or something that's set? I didn't see it in http://www.voip-info.org/tiki-index.php?page=Asterisk+variables Thanks, Woody

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, anyone else seen RX/TXFax crashing Asterisk on latest Asterisk SVN? I've now seen it on two machines I tried to set up - one it seems because the tiff file was malformed, but the other is doing: tiff -> tx fax -> zaptel -> pstn -> ddi -> zaptel -> rx fax -> tiff The above crashes every time. If no one else has

Anyone know how to fix this? gcc -shared -Xlinker -x -o app_rxfax.so app_rxfax.c -lspandsp -ltiff In file included from app_rxfax.c:14: /usr/include/asterisk/lock.h: In function `ast_mutex_init': /usr/include/asterisk/lock.h:302: error: `PTHREAD_MUTEX_RECURSIVE' undeclared (first use in this function) /usr/include/asterisk/lock.h:302: error: (Each undeclared identifier is reported

Maybe I over-complicated my question with the mailfax part. If I leave the mailfax step out entirely, then there should be a .tif file, right? But there's not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Thanks for the responses so far. /Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, We use tiff version 3.5.7-2 and spandsp-0.0.2pre3 with asterisk version 1.0 on debian unstable. I have posted for our problem wtih fax. RxFax works and we receive faxes, but the tiff file is sometimes malformed although the fax seems to be received correctly. Our asterisk server receives calls and faxes from a mobile operator. We are connected to their Cisco router which connects to our

>Does IAXmodem allows you to receive faxes with any extensions >(auto-detecting incoming faxes). You just let Asterisk do the fax detection for you, and when it hears CNG, send it to the fax extension, and your fax extension would just Dial() one of the IAXmodems (using IAX) >>DRi@b-w-computer.de wrote: >> sure in an small office you can use iaxmodem/hylafax to receive faxes