similar to: random one way audio and noise between SIP phoneson same LAN

Giorgio, I'll answer in reverse order: I've not had reports of "noise" from my users. However, when I went down to get the s/w version from the phone that seems to be acting up the most, the user reported that earlier they were actually on a call that was ok then spontaneously dropped the audio. Per my instructions (based on another similar report I read on Digium's site),

Hi, sometimes I have one way calls and noise between sip phones connected to the same LAN so no nat/firewall is involved. I tried with different sip phone models soft phones and the result is the same. I searched inside every log file but found nothing. I made different PBX with different hardware but the result is always the same. Is there anybody experiencing this terrible problem?

Hi all, since Asterisk 1.4 seems to have too many differences from previous versions, wouldn't be nice to have a new mailing list? Giorgio Incantalupo

Hi, we have an asterisk 1.2.1 box and 2 polycom SIP phones. We'd like to show the called name on the calling polycom display instead of his /her extensions as I do with the caller name on the called polycom. Is it possible? If yes, how? TIA Giorgio Incantalupo

pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. [Dec 22 15:52:45] WARNING[4491]:

Hi, I have an asterisk 1.2.1 on a Debian Sarge distro with *three* TDM400P (12 fxo ports). I noticed Asterisk is slow to answer inbound calls so I connected an analog phone in parallel to make a test: __________Asterisk fxo ---- line -----| -----------------Analog phone The analog phone rings immediately when calling, while asterisk shows the message

Hi, I have a box with Debian Sarge, Asterisk 1.2.1 (and zaptel 1.2.1) and a TDM2400P with echo canceller. I installed the card but no echo cancellation is being made...seems like the echo canceller module does not work, infact the software cancellation is working. My zapata.conf has echocancel = 128 and echocancelwhenbridged = yes but no echotraining parameter which gives a warning. I found

Hi, I'd like to build a personal PBX connecting 4 or 5 analogic phones with a ADSL line and I'd like to know what is the right card I need I visited digium site and I think TDM400 could be the right choice but I cannot understand how it works...I think it has 4 slots where 4 modules (FXS or FXO) can be inserted. How many cards do I need to connect my ADSL line to 5 phones? I think I

Hi, I'm using Asterisk 1.2.9.1. I have big problem with SIP VoIP providers registrations: Asterisk freezes when it cannot (re-)register with VoIP provider (registration timeout). The problem is related to DNS names resolution: if DNS server is very slow to respond Asterisk stops every activity (no zap or restart commands on CLI). The bad news is VoIP providers usually do not give their IP

Hi, every second I get on the console: Remote UNIX connection Remote UNIX disconnected which gives no problem but makes console unusable. Is there anybody who has encountered the same problem? How did you solve it? TIA Giorgio Incantalupo

Hi, I'm using asterisk 1.2.1. Is there anybody out there who knows what this warning means? *WARNING: chan_sip.c:3470 process_sdp: Unknown SDP media type in offer: image 5004 udptl t38* Google does not help at all. TIA Giorgio Incantalupo

This is a function of the Phone itself. Asterisk has nothing to do with it as it does not know anything about the call until after the SIP device 'sends' it. To my knowledge it is not posible. I don't even think a SIP standard is available for this. This 'feature' along with changing CallerID Display after a call has been answered is something missing from the RFC. >

We are having an occasional one w-way audio problem that occurs about every 25 - 30 calls on a system configured as follows: Asterisk 1.2.12.1 Sangoma A101 w/wanpipe beta9 Polycom 500s w 1.5.3 This happens only on inbound calls from the PRI. The external caller can hear our customer answer and say hello, however, our customer cannot here their caller. Typically, the caller calls right back

Hi, is it possible to force FOP to reload its configuration files (op_buttons.cfg and op_style.cfg) while it is working? I tried to click on the refresh icon but nothing happens. TIA Giorgio Incantalupo

Hi, I'm trying to use Hylafax without a modem. Is it possible to use t38modem to make Hylafax send and receive fax via Asterisk? If yes, how? I'm searching on internet but still haven't found anything useful. TIA GIorgio Incantalupo

Hi, I am trying to use zaptel module on an Ubuntu 5.10 distro (2.6.x kernel) using gcc 4.0.2. Compilation does not give me errors so after a 'make install' I try to load zaptel module with insmod but the following error arise: *insmod: error inserting '/lib/modules/2.6.12/misc/zaptel.ko': -1 Invalid module format* Is there anybody who can help me?? TIA Giorgio --

Open the console with verbose turned up. Make a test call and see where it is hanging. That will isolate the problem. > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Giorgio Incantalupo > Sent: Thursday, April 27, 2006 11:16 AM > To: Asterisk Users Mailing List - Non-Commercial

Hi, is there anybody who knows what this warning means?? WARNING[27309]: chan_sip.c:8875 reload_config: Section '10' lacks type TIA Giorgio -- ____________________________________________________________________ GIORGIO INCANTALUPO Tel. +39 02 9350 4780 (104) FG&A Software 20017 Rho - Via Puccini, 8 E-Mail : gincantalupo@fgasoftware.com Internet: http://www.fgasoftware.com

Hi, I'm using mysql to store my cdr data. I compiled asterisk-addon module without problems and I see nothing unusual in my cdr_mysql.conf but when I do a reload I get this messages (never seen before): Oct 16 09:43:16 WARNING[8576]: db.c:67 dbinit: Unable to open Asterisk database Oct 16 09:43:16 WARNING[8576]: db.c:423 ast_db_gettree: Database unavailable But If I try to connect from

Hi all, I need to connect my Asterisk 1.4.26 with a Sangoma PRI card (configures with signalling=pri_net)) to a Cisco 2800 PBX. After connecting the cables everything seems fine (ifconfig w2g1 is ok, wanpipemonitor gives no errros, the span is up and active, green light on the card) but when I make a test with my iax phone, there's no way to dial the PBX and I get this WARNING: [Jul 2