similar to: considering purchasing a t1 card, any recommendations?

Hi all, We have just set up trixbox latest with a Rhino r1t1 card, hooked up to a plain E1 PRI line. We call fine SIP to SIP, but as soon as we make a call from SIP to PSTN all sounds become unintelligible screeching or static kind of noise on both ends, when we call PSTN to SIP the PSTN side seemingly OK at least we hear no screeching sound, but the SIP side is a even worse screeching

I have an asterisk system where the asterisk daemon dies typically at least once per day. It is running in the wrapper safe_asterisk, which automatically starts the daemon back up. But we find this unacceptable because when the daemon dies, we usually have active calls drop, and sometimes we have to run asterisk -r -x "module reload" after the daemon starts back up before everything is

Hi, A most peculiar and vexing problem for you all. I hope I have been verbose enough without being a firehose ;) The set up: I have a channel bank, using the r1t1 rhino driver with a rhino T1 card (the channel bank itself is a very legacy piece of equipment)- this supplies FXS for all the house phones. Also, a Wildcard TDM400P, using the wctdm module with 1 FXO module, this supplies FXO to the

Hi I've had an asterisk setup for the past 15 months, based on the debian asterisk packaging. Until late August of this year, I had no problems once initial setup was complete- the system worked essentially flawlessly. Since August I have been having exceedingly infuriating intermittent problems that are causing me occasional periods of nasty trouble: 1. No Dial Tone. Every Sunday night at

Hello! I have been struggling with Asterisk 1.6 and DAHDI for the past few weeks. We are an outgoing call center with 30 internal analog phones hooked up to 2 Rhino CB24 channel banks. The banks are connected to a Rhino R4T1 card in a Dell 2950 server with 8 gigs of RAM. The 2 other ports on the R4T1 go to our 2 PRIs. In this configuration, we have trouble maintaining stability. It may be fine

Hey guys! I'm the past week and a half, I have really learned a lot from the mailing list and the wiki's posted online. Now I have a question regarding different ways I can setup my asterisk server for a small business with 12 extensions in the office. Cost is a great concern, so I know cheap analog phones at the desks is what we are looking at. My question is, should I go do a fractional

Hi guys, I'm new to the telco game and still pretty new to Asterisk, although I've been using it for a couple of months now and like most of what I see. At my office, we've got a small two extension setup w/ two Digium cards for a single FXO line and three FXS extensions, but I'm also working on designing a larger installation for a customer which will involve ~16 analog

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI

Hello All, I'm looking to get some feedback on which solution of providing FXS is going to have the best results with faxing. I'm only looking to see what method is going to provide the best digitization into Asterisk, not for transmission from Asterisk to else where. Any recommendations of specific channel banks are welcome. I will need to provide approximatly 216 FXS Ports and need

Hi all, i have been using asterisk for a few years but i am about to do my first t1 setup. After terrible quality issues between two business locations, we have decided to purchase a point to point t1 from the local phone co. The internet is too crappy, too much lag, queing and jitter. Most calls were dropped. I was about to order two cisco routers with csu cards and remembered our wonderful

I'm having a major problem at one of my branch offices with "Phantom Rings" on their asterisk-based phone system. The system was originally built using 2 X100P cards and was recently upgraded to a Rhino R4FXO-EC card. The upgrade severely increased the frequency of the phantom rings. I've read everything I can find on-line about automatic testing and noise on the line and

This change renames the following 2 apis: * mdadm_create -> md_create * mdadm_detail -> md_detail This is more consistent with list_md_devices, and removes a reference to an implementation detail from the api. --- daemon/md.c | 24 ++++++++++++------------ generator/generator_actions.ml | 4 ++-- regressions/test-list-filesystems.sh | 2 +-

Hi all, I'm trying to insert a Rhino Ceros box equipped with a Rhino R2T1 dual-T1 card and running the latest version of Trixbox (2.4.2) between the central office and a Nortel Option 11. The switch at the CO is a DMS100. Basically, I'm taking the T1, connecting it to port 0 on the R2T1 card, and then connecting port 1 to the Nortel. (Actually a CSU and then the Nortel) We're running

I'm running asterisk 1.2.6 with Sangoma A200 4 port FXO card. Outbound calls are working fine. However, when I have an inbound call.. asterisk will segfault.. and then start again ... then it will take 1 call fine.... I'm running asterisk with a -U and -G of asterisk. Any thoughts?

Can anyone clue me in about these T400 T1 cards I see advertised? I hear they are Digium Clones. Is there some reason to avoid these? How do they compare to TE410P's for example. Bart

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I had the opportunity to test a Sangoma A200 card and I have some doubts that I would like to consult: I tried to detect the card and I had no success using the wctdm module with DAHDI. I guess this is because electronics is different because the TDM400P and OpenVox A400P cards have separate modules for each channel, while the Sangoma A200

Hi all, Just want to check from the list experienced personal about the Digium HPEC, where I had purchased the HPEC and wish to run with TDM card Sangoma A200. I can't install HPEC to run with Sangama A200 card, even I had changed my hpec file from i686 to i386. The error that I had as bellow; > Found key 'HPEC-XXXXXXXXXX' for 2 channels. > Found valid HPEC licenses for 2

As far as I can tell, after discussing this matter with other asterisk users in my area, my telco _does_ provide disconnect supervision.. It seems that the problem is actually related to the Sangoma A200 card I'm using, as two other people both using this same card have expressed the same problem.. Are there any other users on this list using the Sangoma A200 FXO port card, and experiencing

Hi - I just got a Sangoma A200 card with a single 2FXO module and what appears to be an empty module. I put the card in my Dell GX260, but the power light on the front of the box just blinks and won't power up. I did take the power cable from the CDROM to put on the card - I don't need the CDROM right now.. I'm looking for direction in getting this card working - I currently