similar to: Cisco 7970 SIP won't update?

Anyone have the 7970 xml config for sip yet? Aaron

Hi! I did manage to load phone with SIP image : SIP70.8-0-3S, made SEP-MAC.cnf.xml, but phone never read the configuration from it. On the screen it's written "Unprovisioned", and phone is not trying to register with asterisk. Please help!! MihaelaMJ -------------- next part -------------- An HTML attachment was scrubbed... URL:

I currently have two Cisco phones, a 7960 and 7970. The 7960 has a SIP OS on it and the 7970 has a SCCP. When the 7960 powers up it loads OS79XX.TXT, SIPDefault.cnf, SIP000E3875266C.cnf, RINGLIST.DAT, and dialplan.xml. I have a Cisco SmartNet agreement with the phone so I have access to download the firmware. I recently purchased a Cisco 7970 phone and was in the process of configuring

Hi, My apologies for the OT. My googling came up empty and hopefully there are some members in the community that could give me a hint how to solve this issue: Cisco 7961 with SIP firmware 8.3.3. Needed to downgrade it to 8.0.4SRS2. The downgrade process started off good. The 7961 got it's IP address via DHCP, found it's SEP<mac>.cnf.xml file and started to "upgrade"

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Does anyone know how to make this thing (7940) work with asterisk (chan_sccp module) ? I've set the configuration according to the wiki and now the phone just keep asking for CTLSEP<xxx>.tlv from my tftp server. In the cisco's web interface, I found this in the device logs : 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 0x8106, 0x0, 0x12300800 ...

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

Dear Asterisk People, I am having problems putting a SIP image on a 7970. I was wondering if anyone can help? First problem is the phone is running version Load IDJar70.2-5-47-17.sbn Boot Load ID7970_64054100.bin Version5.0(0.6S) So I did read that you couldn't simply put the latest SIP image on such an old phone and a newer firmware version should be used. I got

I'm having issues with a Cisco 7970. It seems to ignore minor changes in its config file. Is there something like the versionstamp or some other setting I need to increment in order to get the 7970 to update each time? It does seem to download the file from the TFTP server, but it never updates the display or its settings. Thanks Tim

Which command effects whether or not the * server will lookup a peer from the db even though the phone isn't registered locally? I have several * servers but I want any server to be able to lookup and send a call to phones registered on another server (SIP cluster?). Thanks Tim

continuing discussions of 79xx issues. i've seen referenced and am experiencing difficulty getting a 7970 to work behind NAT to a public asterisk server. i am successful with 7960s. 1. SIP load is 70.8-3-3SR2S 2. config works fine if 7970 is connecting to an asterisk server a local LAN (same subnet) 3. when debugging it in a NAT'd environment I see the register and

I'm not sure if anyone has done this before or not but, I was able get the Cisco IP Communicator soft phone to work with Asterisk using SIP. Thought I would share my experiences. The key is on the installation. To have the software use the SIP protocol type the following command: "msiexec /i CiscoIPCommunicatorSetup.msi /qb SIP=1". After installation configuration is just like

- How to restart the phone? (On 7960 it is *+6+Settings) - How to setup working dtmf? - How to setup hinting? For line is <line button="4"> <featureID>9</featureID> ... For speeddial is <line button="5"> <featureID>2</featureID> <featureLabel>341</featureLabel> <speedDialNumber>341</speedDialNumber> </line>

How does one answer more than 100% of the calls in less than 60 seconds? techsupp has 0 calls (max 20) in 'leastrecent' strategy (104s holdtime), W:0, C:3, A:2, SL:166.7% within 60s

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after

Hi All I'm trying to get my 7970 working on the latest head version of Asterisk without success, perhaps someone could help. I'm using the head version of Asterisk with the chan_sccp from berlios.de dated 7th August. The compilation of chan_sccp seems to have worked without any problem, however I'm pretty sure the problem I have is with the config files in TFTPBOOT:- With the 7970

I've got a Cisco 7960 that I'm trying to convert to SIP. Here's what "Firmware Versions" says: App Load ID: P00305000300 Boot Load ID: PC03M030 Version: 5.0(3.0) The files that I have are: P003-07-1-00.sbn P003-07-1-00.bin P0S3-07-1-00.loads P0S3-07-1-00.sb2 If I put "P003-07-1-00" in OS79XX.TXT, the phone tries to tftp XMLDefault.cnf.xml. I've

I'm trying to connect a Cisco 7942 to my Asterisk box. I have a 7960 and 7912 currently connected and functioning. I'm trying to use the recommendations from here: http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP I have created a "XMLDefault.cnf.xml" and it took the latest image but the phone states it's unprovisioned? Any

Hi all, I've been playing around with a cisco 7940 phone. It seems to like talking to Asterisk with the chan_sccp plugin. The only problem is that it tries to call out to a SEPXXXXXXXXX.cnf.xml file to verify it's configuration. I've found docs for SEP*.cnf files, but not .xml ones. Does anyone have a .xml file for a 7940 (Skinny?) phone that I can start with? ...Jeff

I have been trying for sometime to upgrade this phone to either sip, or the latest sccp (at this point I don't care) with no success. It has an sccp image (don't know the version off the top of my head) that is incompatible with chan_sccp. When I boot up the phone, it asks the tfpt server for the .tlv file, then the SEP<mac> file which it receives successfully. It then asks for