similar to: Polycom IP 501 message light

Hi, everybody: I have looked at the Polycom entries on www.voip-info.org, and they're outdated and convoluted and full of errors. All I want to do is get my Polycom 501 to register with a working Asterisk server. I want to do the configuration locally on the phone through the console. (The server works with an Xten X-lite softphone.) Has anyone done this? What do I need to do? Thanks,

Hi, I have a Polycom 501 that is currently unusable because I started a firmware and sip upgrade that I can't complete. The Ubuntu box address is set static at: 192.168.1.101. The phone address is set static at 192.168.1.51. The phone settings for the server menu are: Server Type: Trivial FTP Server Address: 192.168.1.101 Server User: PlcmSpIp Server Password: PlcmSpIp (not sure what it

Is there a way in asterisk to Activate/Clear the blinking light on polycom phones indicating VM. Either from an AGI or some way in the dialplan? I want to be able to control this light for from my application. I have an AGI to do something similiar to VM and want to light /clear the light myself. Thanks, Jerry

All, I am setting up asterisk on a nslu2 (Linksys) using unslug. Everything is working great except that I have a polycom 301 and I cannot get the message indicator to work. I have created the users and mailbox in users.conf and I can manually dial the mailbox (*986000). Last thing is I am not using config files for the polycom just web browser. Can anyone point me in the right direction I

I'm setting up a new Asterisk system on a Dell server and I'm getting "fuzzy" voice between the Polycom IP SoundStation 550 and the Asterisk server. I've checked all of my codec settings and both the Asterisk and the Polycom agree on u-Law encoding. I'm using the latest release of the Asterisk code (1.4.17) and other software. If I call between phones (i.e. two

Hello, Here is a breakdown of the issue I am experiencing. I have three remote employees, in various states, who have Polycom 501 phones. They are unable to receive incoming calls after a few minutes of the phones being plugged in. They work immediately after being plugged in, but they lose the ability shortly thereafter. They can always make outbound calls, but only to real phone numbers, not

I'm running Asterisk 1.2.8 with Polycom ip501's xten softphones The only problem I'm experiencing is the following: I can't seem to get blind transfers to work with my Polycom 501 phones Either through the feature code or the soft keys. Feature code blind transfers: I set up a feature map in features.conf like this: blindxfer => # This works for all my

Hi, This is Chandra. I have Polycom IP 501 phone. Its showing wrong time on the display screen. How can I set the "New York" time? What value I have to give to GMT offset value? Look forward to your response. Thank you. Regards, Chandra. --------------------------------- Ahhh...imagining that irresistible "new car" smell? Check outnew cars at Yahoo! Autos.

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Noah Miller > Sent: Wednesday, April 25, 2007 9:52 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] My Polycom IP 501 is formatted its file > systemitself > > Hi Chandra - > >

I've been noticing that my group of Polycom IP 501 phones seems to randomly reset themselves nearly every night (I guess it usually happens at night, since I've never seen it happen while I've been at work during the day).. When I say "reset", I mean, the hands free volume and ring volume are set to the default and the call logs (received calls, missed calls, placed calls)

I need to buy some new phones for our own offices. I've used only Polycom phones until now, but I'd like to broaden my experience. I'm trying to decide which phones to experiment with. I have these options: - A combination of Polycom, Aastra and Snom - Just Polycom One the one hand, I'd like to keep things uniform, since it greatly simplifies provisioning. On the other hand, I

Hi, We bought 10 Polycom IP 501 Phones. Our all nine phones are working fine except one phone. When I tried to connect my phone with my network, It automatically formatted its file system. Now, It is not booting. What I have to do now? Can you please tell me the solution. Look forward to your response. Thank you. Regards, Chandra. --------------------------------- Ahhh...imagining

Hi, folks: I just took delivery of new PoE cables (PN 2200-11077-002) for our Polycom phones here in the office. I have the following to report, for the erudition of existing Polycom users and those considering purchasing Polycom sets from the set of models noted in the subject: 1. The cables do indeed work (hooray). 2. The cable has a module on it about a third of the way from a female end.

Hi there: I know this has come up before. I'm having trouble finding the fix for it. When I call into Asterisk to check voice mail, the prompt gets cut off. Example -- on the Polycom IP 501, I press "messages"; All I hear is the last part of the initial prompt, like so: "assword" So I enter my assword and listen to my messages. The prompts for incoming calls are

PBX: Asterisk 1.4 Phones: PSTN phone connected to TDM400 X-Ten Lite Polycom 430 Scenario Polycom 430 = User1 User2 calls User1(Polycom 430) asks to be transfered to User3 User1 does an attended transfer using the trnsfr button on the polycom User2 is placed in music-on-hold User3s phone rings. (So far so good Right?) User3 picks up the phone to answer User2 only to

Polycom Provisioning Tool Updated. I made a bug fix that was reported, which was causing the directory creator to not work when there was an invalid character in the filename of the csv. I have also posted an FAQ: http://www.wintrisk.com/ppt.html#FAQ Download the new one, and tell me what you think! It's free, and mildly useful! http://www.wintrisk.com/ppt.html Yours, Michael Munger,

Could not find your post for 4 months ago. -------------- Original message -------------- From: "Anton Krall" <akrall-lists@intruder.com.mx> > Yes, check a post that I made about 4 months ago, I posted the cofig for > setting the speaker, handset and ring volumes .. > > |-----Original Message----- > |From: asterisk-users-bounces@lists.digium.com >

Hi all, Has anyone made up custom ring tones for the Polycom SIP phones? We use different rings for different lines, but the ones it comes with are all very similar. In the interesting of sharing, here's one I made up for paging: <PAGE_BEEP se.pat.ringer.13.name="Page Beep" se.pat.ringer.13.inst.1.type="chord" se.pat.ringer.13.inst.1.value="12"

Hi List; Can someone advise me if Polycom support H323 that work fine with Asterisk? And wether this H323 Polcyom devices more costly than SIP Polycom. Also, I am not able to know if new Polycom come with PoE adaptor so no need for PoE Switch (can use normal switch that does not support PoE)? Do I need any special cable for Polycom or normal Ethernet cable? Regards Bilal

I have provisioned a bunch of Polycom 301 phones to get the config files from my ftp server. Out of the 4 phones 2 get the config file however the other 2 cannot contact the boot server. I have reboot the phones a number of times remotely (the client is 400 km away) through vnc and logging onto the web config internally. No matter what I change on the web config page it is not saved. I feel I