similar to: SPA 3102

Hi, I have a Linksys SPA 3102 using as ATA. The call routing is : Phone -> PSTN -> SPA 3102 -> SIP Proxy -> Asterisk The problem I am having is that when the phone hangs up, SPA 3102 can't detect it and relay the CANCEL message. Is this problem with my SPA 3102 config or it just works like that by default? Thanks in advance for your help. Regards, Mark -------------- next

I have a linksys SPA 3102 with a DECT phone connected into its Telephone port. It has been working, but something I've done (and I don't know what) means that now everytime asterisk tries to dial it, it says it is busy. I can make calls from it through asterisk I am at a complete loss to know what to try next to fix it. Any ideas? -- Alan Chandler http://www.chandlerfamily.org.uk

Dear Expert, I am stuck when trying to register SPA-3102 on AsteriskNow .. could any body please advise .. where can I find the article for doing this? .. I googled but got nothing.. Regards bie -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071203/6bbbecd8/attachment.htm

Hi to everybody, I have an spa 3102 where i connected an analog phone (in the fxs port) and the pstn line (in the fxo port). This is my problem: the incoming call doesn't arrive to asterisk. In the spa web page i configured this dialplane: (<:line01@192.168.1.220:5060>) where line01 is the context in sip.conf, 192.168.1.220 is the asterisk ip and 5060 is the asterisk sip port.

Hi list, Hopefully, some of our Dutch members can help with this one. I'm also based in the Netherlands and am using a Sipura (Linksys) SPA-3000 (firmware v3.1.10(GWd)) as a PSTN to VoIP gateway for my Asterisk test system. It works fine, except that the Called ID (CID) is not working. I'm aware that KPN (our local telco) requires a separate subscription to activate CID on POTS

Anyone tried the new PSTN/FXO port in the new SPA 3102 FXO/FXS adapter ? From a quick test (got mine yesterday), seems like it is not recognizing Caller ID from PSTN/FXO port.. Using the same configuration as a Sipura 3000 (to be sent to mother-in-law POP :-), no Caller ID at all, (I've even extended the PSTN delay to give it more time, but no dice). www.voxilla.com forum has a couple

Hello I was wondering why there doesn't seem to a Windows version of Zaptel, making the Digium and its clones unavailable for a Windows PBX. Is the Zaptel/Zapata combo too *nix-centric? Thanks.

Hi to everybody, I need some help in configuration of the spa 3102. I created an account for line 1 (user 208, sip port 5061) correctly registered in asterisk, then i create an account in sip.conf like this: [general] register = line01:pwdsipura:line01@192.168.1.222:5060/095377078 [line01] username = line01 fromuser = line01 secret = pwdsipura host = 192.168.1.222 fromdomain = 192.168.1.222

Hello I have just set up Asterisk Asterisk 1.4.21.2 on a CentOS 5.2 machine. I am using the OpenVox B200P ISDN card. My problem is that even though chan_misdn module seems to be loaded correctly with Asterisk (I can see it using 'module show' command) the misdn commands are not available to me in the CLI so I cannot tell if my box is correctly interfacing with the ISDN card Any ideas

Good Afternoon, Can someone please explain what Y-cords are available out there and how they can be used with Aastra or other VoIP phones? Maybe with or WITHOUT headsets? Isn't a Y-cord traded for soft Barge in these days? Thanks, Bruce -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I've got a device that seems to become unreachable for about 2 minutes, every hour. From what I can tell, it isn't due to network or server issues. Any ideas? TIA. -- Mike Diehl Diehlnet Communications, LLC. Voice: (505) 903-5700 Fax: (505) 903-5701

In my hunt to track down my echo issues, I tried disabling all echo cancellation, suppression, adaption, on my SPA-2000 (Advanced section of the config, under Line 1/2). Then calling from one local extension to another. (SPA-2000 Line1, to Line2 on the same device) I was pretty shocked with the results, the echo was HORRIBLE! I even tried 3 different analog phones. Now, once I turned the echo

Hello asterisk-users, My SIP phones are in pickupgroup, and if some of them ringing from other phone can pick up with *8 as usual. But I want to know if this happen. I've tried the a extension, but seems not working. Any other idea? -- Best regards, Gergo mailto:csibra at gmail.com

Hi Friends, I have successfully implemented Intercom, Voicemail and International dialing using Asterisk. Now I want to connect my PSTN Lines to Asterisk server. I have 3 PSTN number (lines) to connect to Asterisk. For this, I want to use Sipura SPA-2100. Is my decession is correct or not? Is there any disadvantages with this Sipura SPA-2100? Please tell me. Thank you. Regards, Chandramouli

Hi all, With the gamut of FXO cards out there, I'm looking for a recommendation for home use. I have a nicely working Asterisk 1.4 system that just requires an FXO card to connect my NTL PSTN to it. My previous X101P clone seems to have kicked the bucket. Any suggestions would be greatly appreciated. Regards Kyle -- Kyle Gordon kyle@lodge.glasgownet.com http://lodge.glasgownet.com

Hello all. I am just getting back into Asterisk and I am setting up my Linksys SPA3102. I have incoming calls working fine, as is the phone plugged into the unit. My problem is I cannot get the SPA3102 to dial a phone number automatically. I can call the extention of the PSTN and I get a second dialtone, and I can then manually dial. I'd like to be able to have Asterisk pass the

Hey guys, just thought I'd let you know that I'm giving away a copy of "TrixBox Made Easy" on The Asterisk Blog <http://www.asteriskblog.com>. Check it out. -- www.AsteriskBlog.com Your home for easy to learn Asterisk stuff. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I have a problem with the dialing tone in PAP2: When making a call, I can hear the calling tone 5 times and then it stops. The called party still hears the call but not the calling party. I've playing around with different parameters on the PAP2 web config with no success until now. Anyone has seen the same probelm? Thanks, Jose

Hi, I have a queue with one agent added using AddQueueMember (FAO|Local/1001 at from-sip|0||Agent/602). My extensions.conf is [general] static=yes writeprotect=yes autofallthrough=no clearglobalvars=no priorityjumping=no [from-sip] exten => 100001000,1,Dial(SIP/100001000,,t) exten => 1001,1,Dial(SIP/1001,,t) exten => 1002,1,Dial(SIP/1002,,t) exten => 1003,1,Dial(SIP/1003,,t) exten

Hi, I have a Linksys PAP2-NA connectd to my asterisk. I would like the device to add 2 characters in front of the dialled number always when it send the call to my asterisk. I dont know how to do that. I will summarise my requirement. My friend dials 1-210-1234345, i want the asterisk to get 55-1-210-1234345. Can someone help me to add this dialplan. Thanks in advance Dan -------------- next