similar to: Understanding NAT Traversal

Hi, I'm running a 1.1 version of Asterisk (a stable build from back in Oct-05) running on RedHat 9.0. Everything's been great but a couple of days ago, we all stopped receiving emails of our voicemail. There's been no changes to our configuration I bet I'm expereiencing a Linux problem rather than an Asterisk problem, but because I know only as much Linux as required to get

Hi, I'm having trouble compiling zaptel 1.4.4 on SUSE 10.1. I'm really only interested in getting ztdummy to work because this is a dev machine with no zaptel h/w. SUSE 10.1 is a 2.6 kernel: asterisk-dev:/home/hugh # uname -r 2.6.16.13-4-default It seems that my problem is related to autoconf.h - I cannot find that file: asterisk-dev:/home/hugh # find / -name 'autoconf.h'

I have an Asterisk serving 15 people using the X-Lite soft-phone. Currently they all register to the internal IP address of Asterisk (192.168.1.110). I only use VoIP internally. External calls go PSTN. I'd like to arrange it so that they register to our external WAN address (port forwarded to Asterisk) so that they can go mobile and still have Asterisk service. Is it possible to arrange it

Hi, I have a Linux Box to share a internet connection with NAT: | ISP | | Router | +---------------+ 200.36.107.137/32 | | | 200.36.107.138/32 +---------------+ | Linux | | router | +---------------+ 192.168.1.254/24 | | +---- host 1 192.168.1.1/24 | +---- host 2 192.168.1.2/24 | +---- ... | +---- host n

On Tue, Sep 16, 2008 at 2:21 AM, Michiel van Baak <michiel at vanbaak.info> wrote: > On 22:46, Mon 15 Sep 08, hugolivude wrote: >> I have two Asterisk servers running on the same LAN. One starts fine, >> but when I start the other I get: >> >> pbx_dundi.c:4582 load_module: Unable to bind to 0.0.0.0 port 4520: >> Address already in use >> >>

I have a bunch of road warriors who I've set up with Xlite clients. Unfortunately the sound quality has been intermittent at best. Sometimes it's great other times completely unusable. When it's bad one usually hears harsh static when the other party speaks or their voice gets "clipped" to static if they speak too loudly. Many of these users have migrated to Skype ? much

Hello All, I have a number of X-Lite users in countries where the incumbent Telco will do anything to block VOIP traffic. For some reason neither the X-Lite broadband or dialup clients would register with my server unless we configure them to use the Xten Xtunnels demo server. Once the Client has registered the call quality is great! The problem is the Xtunnels does not support other IP Hard

Curious whether the ChanIsAvail command is thread safe. By that I mean, if I use ChanIsAvail to determine which channel to use, can I be sure that it will still be available when I go to Dial it on the next line? It occurs to me that there's a possibility the channel could get used by a competing thread AFTER my thread has determined it is available and BEFORE my thread gets a chance to

Asterisk 1.2.7 RedHat 9.0 Hi, I've run into some voice degradation problems with IAX2: I frequently have calls come in on a DiD provided by an ITSP. I often have to redirect these calls back out to the PSTN (i.e. to a cell phone). When this happens, I don't want my server in the media path, I want to hand it off to my ITSP instead and let them handle both ends of the call. I've

I'm running RedHat 9 with a TDM400 (2FXO, 2FXS). Before I implemented Asterisk, some users were using Bell services to set-up 5 way calling: The user would set up a three way call on one line, switch to the second line, set up another 3 way call and then link the two lines together with the Flash key, thus establishing a 5 way call (the user, 2 others on line 1, another 2 on line 2). How

Hi, I'm having trouble getting feature codes to work in Asterisk 1.4.21.2. Features.conf contians this: blindxfer=## atxfer=*2 automon=*1 disconnect=** I'm really most interested in getting disconnect to work so that I hear "Goodbye" when I press ** during a call connected this way in my dial plan: exten => 1,n,Dial(SIP/14168724765 at 6135551212-sw1|120|gtT) exten =>

Hi, I'm installing * 1.4.9 and a couple questions have come up: 1) I read here<http://www.voip-info.org/wiki/view/Asterisk+installation+for+CentOS+4.x>( http://www.voip-info.org/wiki/view/Asterisk+installation+for+CentOS+4.x) that if you are using E1 cards you need to install LIBPRI. I'm not using any cards on this system, so does that mean I don't need LIBPRI? Asterisk built

Hi, we a have a SER (OpenSER) in front of 2 real-time Asterisk. SER simply forward SIP messages to 1 of the Asterisks: UA --> SER --> Asterisk We have a problem with REGISTERs: Asterisk answers with 200 OK, but changes the Contact header, inserting the IP of SER instead of the original IP (the IP of the UA). It seems that performs a sort of NAT-traversal, but all the elements are on

I've been asked to assess the cost of implementing Asterisk with a single T1 line in one of our offices. I've had plenty of experience w/ TDM400 cards, but T1 is new for me so a couple of questions: 1) Will I need a digital or analogue interface card? I expect digital is the answer, but the Digium web site said something about analogue cards being able to support "provider T1

Hi - I'm looking into realtime and I'm having a bit of a problem with the SIP part. My review of the posts seems to indicate that I should use realtime static for the [general] part of my sip.conf including the registration commands: register=><did>:<secret>@<domain>/<did context> and use realtime realtime (funny name!) for peers and friends: [myprovider]

Asterisk 1.2.7 RedHat 9.0 I frequently have the need to redirect calls that come in on a DiD provisioned by my ITSP, back to the ITSP so that they can terminate the call on the PSTN. For example when an external call comes in, I often have to send it to a cell phone. I believe that this is referred to as "hairpinning" the call. I do this by answering the incoming call and then I use

Hi, I'm having trouble getting Dial to exit when the caller hangs up in Asterisk 1.4.21.2. I use a POTS line to call into the DiD given to me by VOIP service provider. When the call comes in, I have the VOIP provider send it to another POTS line. All this works fine however when the caller (me) hangs up, the Dial command does not exit. The callee stays connected (and my billing

Hi there, We have plans to install an office (not call center) with the following setup: 200 linksys 942 phones (sip + g711) on a LAN a server with a dual port E1 sangoma and a remora card with 4 fxo modules. So far when we want to setup a linksys phone, we need to use the http interface of each phone, disable/enable a lot of things and plug it into the network. this is not the best scenario for

I am trying to make 1 soft SIP UA behind NAT connect to a public hard CISCO UA via a public asterisk server. The CISCO UA can hear the voice from the SIP UA but not vice versa. I do set nat to yes for the soft phone. Any help would be greatly appreciated. Below is my sip.conf [general] port = 8060 ; Port to bind to (SIP is 5060) bindaddr = 0.0.0.0 ; Address to bind to (all

197]: superpolka.com.ua (superpolka.com.ua[::ffff:77.87.154.174]) - error: FreeBSD with vulnerable chroot (FreeBSD-SA-11:07.chroot). 197]: superpolka.com.ua (superpolka.com.ua[::ffff:77.87.154.174]) - chroot to '/home/ftp' failed for user 'ftp001': Operation not permitted. 197]: superpolka.com.ua (superpolka.com.ua[::ffff:77.87.154.174]) - error: unable to set default root