similar to: Wiki Voip Phone reviews

On Tuesday 10 May 2005 9:45 am, David Masure wrote: > Hi folks ! > > I bought two sipura 841 phones. I used to have GN Netcom headset which > I connect instead of the handset. The problem is that I don't have any > sound coming out the headset and I can't speak neither ! > ... > > Or....can anyone advise me on headset working with the sipura 841 ? I just use a

Hey Everyone, We are in the process of reviewing headsets for use with our GXP-2000s. I'm looking for some feedback as to which headsets people are using, the pros and cons of those headsets, and if they would recommend them to someone else. Any help would be appreciated... - Jason -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am looking to replace all of the old "Bell" (POTS) phones in my home and office with IP phones. As you can imagine I don't have a huge budget to work with but I want phones that will provide acceptable voice quality and durability. There are basically three categories as I see it 1. satellite phones (low cost, low function) 2. primary domestic phone (good quality, POE capable,

I started out a few years ago with some SPA-841 sets, because the Grandstream 2000 I thought I wanted was perpetually delayed. The GS had more call appearances, and I didn't want just the 4 max that the SPA offered. As it turns out, with the greater flexibility of VOIP, I don't need 'dedicated' CAs the way I needed them on ISDN previously, so 4 is actually adequate. Along the line,

Hi all What headset do people use with the GXP-2000? Any recommondations for or against particular models? Thanks Peter -- Peter Bowyer Email: peter@bowyer.org Tel: +44 1296 768003 VoIP: sip:peter@bowyer.org

I'm running the latest firmware on the SPA-841 and have a problem with echo. The echo occurs on all calls (PRI ISDN on a E110p or SIP) and is not present when I use the SNOM190 phones so I can def. isolate it down to the SPA-841s. The codec used is g711u and the phones are on their own dedicated 100mbit switch with no other traffic. The server is a 3Ghz PIV sitting at 99.9% idle all

Can anyone here have experience using G.722 on the Grandstream GXP-1200? It's supposed to support the codec, but I wonder if the handset does it justice? The older BT-200 also supported the codec, but the handset was not good enough. You could only hear the improved call quality using a headset. Michael Graves mgraves <at> mstvp.com o(713) 861-4005 c(713) 201-1262 sip:mjgraves at

I'd recommend any of the following, which are all in your price range Snom 300 Polycom IP430 Polycom IP501 Aastra 9112i Linksys SPA-922 Grandstream GXP-2000 Cory Andrews ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Zeeshan Zakaria Sent: Wednesday, November 01, 2006 11:17 AM To: Asterisk

Hi When I make a call with the Grandstream GXP-2000 through Asterisk (and SER) to landline using VSP, after I hang up the call the other party are still connected for another 30-40 seconds. I've notice that the SIP BYE is sent to Asterisk, but Asterisk sends no SIP BYE on to VSP. When I use the SPA-941 the call terminates on the other right away soon as I hang up. I have updated the

Does anyone have a recommendation for a good SIP phone with a busy lamp field? I need my operator to be able to see extension status for about 20 extensions and transfer via HOLD + extension button. I've got a pair of SNOM 360s with the sidecar, but I'm very disappointed with them. The buttons are cheap and rubbery like a Sipura 841, the handset cord is short and cheap, the audio quality

I recently posted a question RE the Sipura 941 and using different ring tones, Thanks to hads I managed to use SET(_ALERT_INFO=Classic-1) to achieve this but trying this on the GXP 2000's didn't seem to do the trick?? Has anyone one had any luck on this topic? Also haven't been able to find any info on an auto-answer for the GXP 2000, again, I have succeeded in doing so with the

I'm having a problem getting a good clear output sidnal from Ekiga to a VOIP conference call using the Ekiga.net free conference call system. I'm told that each time I speak, my voice is clear & intelligible for about .5 - 2 seconds, but then it starts to be garbled, sounding like the sounds R2D2 makes. I've used 2 or three mic/headsets - two plug into my audio I/O sockets on my

snom 300 :"> CS -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Im Auftrag von Kristian Kielhofner Gesendet: Mittwoch, 1. November 2006 12:01 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff: Re: [asterisk-users] Which IP phones have best voice quality,preferably under $150 Zeeshan Zakaria

I'm trying to find a voip-suitable USB headset (I.E. headphones + microphone) which I can use with my laptop while I'm traveling and using Firefly or another softphone. I'm currently using a Logitech headset which works well (except the echo it generates toward the other caller when I turn up the gains too high), but it just doesn't carry well - in fact, I can't carry it in my

Hi all, I have to buy some IP phones. Previously I have used Grandstream GXP-2000, Budgetone 101 and Linksys SPA-841. I always had problems with sound quality with all of them, and I was always of the opinion that it were the phones which were not good. In GXP-2000 deployment of about 50 phones, some work good, some have sound problems like words missing, clicking sounds when talking, and some

I have read the user reports on the Aastra 480i SIP phones, but the last report is from October, and the advice was to stay away from these units. I was looking at the cisco 79XX series or the SPA-941's, but they don't have backlit displays. I also like POE support so I don't have to run multiple wires to the phones and makes for a neater look. I dislike the looks of the SNOM

I was just browsing my local suppliers list of headsets - not a single one with a single 2.5mm jack. Either USB or 1-2 3.5mm jacks. Can anyone recommend a headset that works with e.g. SPA-921 and -941? /Per Jessen, Z?rich

Hi Just 2 issues I have with SPA841. 1. I autodial extension 600 then inside an AGI wait for more digits. The digits are transmitted correctly to * but they do not show up on the SPA841 display, only the 600. How do I set the 841 is show the digits after the 600# 2. Is the SPA841 pixel display backlit? Master

Hello Everyone, My company is about to deploy * as replacement for our existing commercial Altigen PBX. Meanwhile, I've been trying to find the best cost effective SIP VoIP phone which we can use in office for 20-30 employees, as well as a few remote staff. Normally I wouldn't post about a VoIP phone, however, this phone was released less than a week so I thought I'd give some

Watch some videos. Mark your calendar. Invite your friends. Join in on IRC or Voice. Join the mailing list, say "Hi. :)" ===== 1) 2010.7 Videos: How to write VOIP client in less then 2 minutes, rpdammu Schizophrenic Firewalls - virtualized net stack OpenBSD, Claudio Jeker Motorola Droid Metro PCS Apps, makeitcricket.com Open Wonderland virtual worlds platform, Nicole Yankelovich,