similar to: detecting 1-900 and like exchanges

Hi all, I thought this may be useful information for the Brits reading this list: I installed a * box (one ZapHFC BRI) for a customer last week and noticed the following warning every fifty seconds: == Primary D-Channel on span 1 down Dec 6 17:31:19 WARNING[213005]: chan_zap.c:1989 pri_find_dchan: No D-channels available! Using Primary on channel anyway 3! == Primary D-Channel on span 1

In my attempt to setup a single FXS line I have been following the instructions for "Telephony Card Drivers" on the asteriskdocs.org site. I have managed to checkout, make and install the zaptel code and can load the zaptel module but when I attempt to load the wcfxs module it tells me: ZT_CHANCONFIG failed on channel 1: No such device or address (6) FATAL: Error running install

I'm not sure if this is an Asterisk thing, a handset thing or a telco thing, so please be gentle with me if this is not the right place to ask ..... When placing a call over a SIP channel to a mobile phone, if the phone is engaged, it does not return a BUSY status straightaway. Rather, I get a ringing-out tone for the timeout duration specified in the Dial() statement; *then* I get

I am currently developing an application in which two users exchange goods and money in an escrow like environment. Buyer has some money and wants an item that Seller has. Buyer does not want to pay Seller until Seller ships the item. I am unsure of how to best handle the payment part of my application. Buyer''s money eventually has to end up at Seller and my company would like to

Hey all, Working slowly on getting the myriad number of parts to my fax system plan together, and one of the pieces I want to nail is how to go about, for the outbound context (fax-out) pre-pending a digit onto a number? I.e., for all my testing right now, I've been dialing '91XXXXXXXXXX', as the asterisk server doing faxing junctions into my old Rolm CBX switch, and so I need the

Was /etc/nut/upssched-cmd automatically installed? I don't have it on my raspberry pi. :-( On 2019-04-03 1:54 p.m., Mike wrote: > I figured this out and it is working now.  This fix seems strange to me > and is possibly a bug.  I'm sharing in case it might help others. > > I had to uncomment all of the NOTIFYFLAG statements whether I was > changing them or not. 

We are running asterisk with a single POTS line for local calls and a voip line for long distance. Whenever we receive a call on the POTS line it is more than likely, but not always, going to have significant distracting echo. In addition to that there is occasional heavy crackle or static. I have tried to follow the guidelines at :

Hello I do have problem using Linux with an external HP tape drive. The server platform is also an HP Server; the server is an HP ML350 G4, and the Tape drive is a HP Storage Works Ultrium 448 - 1U Rack-mountable. HP Ultrium documentation says two drivers should be automatically up, sym53c8xx for LSI SCSI interface "st" for tape and /proc/scsi/scsi should contain information about

The local telco is now going 10 digit dialing even for local (free) calls which used to be 7 digit. For a while no problem, everyone will continue to dial 7 digits, and I'll add the area code. But pretty soon everyone will become used to 10 digits. There are about 40 3 digit local exchanges. I'd like to store the exchanges in a database, and use the dialplan to check them. I can

Mike, Thanks for the info. I have enough to add an entry to the DDL, but I have a few more questions inline. On May 14, 2017, at 1:21 PM, Mike wrote: > > [updated] > > OpenBSD 6.1/amd64 > NUT 2.7.4p0 (from OpenBSD package) > > > Results of upsc: > > battery.charge: 100 > battery.charge.low: 10 > battery.charge.warning: 20 > battery.mfr.date: CPS Let

Hello, I've 3 * boxes connected with IAX2. Everything was working correctly and since few days, after upgrading them to Asterisk 1.02, i started seeing IAX2 notify messages excahnges on port number 1024 and 1040 in addition to the specific 4569 iax2 port, is that normal ? All call between * boxes are rejected with "NO SUCH EXTENSION or CONTEXT" message, I've checked my

I have asterisk running more or less ok but I would like to turn off call waiting and be selective about the incoming sip connections. This is running asterisk 1.2.8 with a fxs and fxo card and a configured voip (sip) line. Currently I'm using freePBX 2.1.1 to configure asterisk. Problem 1) if someone is on the phone already and another call comes in for an already engaged extension I

On Tue, Sep 24, 2013 at 10:21 PM, Aris Adamantiadis <aris at 0xbadc0de.be> wrote: [snip] > I've worked this week on an alternative key exchange mechanism, in > reaction to the whole NSA leaks and claims over cryptographic backdoors > and/or cracking advances. The key exchange is in my opinion the most > critical defense against passive eavesdropping attacks. > I believe

It seems that the UPS I bought is actually served by the blazer_usb driver. USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875

Am having a unique problem, calls received on my SPA942 seem to end after 15 seconds, but calls made from this device do not have this problem. For this device (when receiving calls) I get periodic "chan_sip.c set_destination: can't find address for host" I have set the "canreinvite=no" in the sip.conf. Does anyone have a sample entry from sip.conf for the Lynksys SPA 942

Hello list, first of all, I'd like to report that my UPS N-Power MEV-3000LT (http://www.380v.ru/catalogue/micro-ups/mega-vision , in Russian), which is not in the hardware compatibility list, is mostly supported by the blazer_ser driver. I have very strong grounds to believe that this (and other) N-Power UPS'es are rebranded for Russian and Italian markets from their counterparts

On 5/21/2017 10:39 AM, Charles Lepple wrote: > Mike, > > Thanks for the info. I have enough to add an entry to the DDL, but I have a few more questions inline. > > On May 14, 2017, at 1:21 PM, Mike wrote: >> >> [updated] >> >> OpenBSD 6.1/amd64 >> NUT 2.7.4p0 (from OpenBSD package) >> >> >> Results of upsc: >> >>

Hello - ICI Real Estate Agents, Brokers, Landlords, Commercial/Industrial Tenants, and Investors. - Add Listings to our Industrial Commercial (ICI) database - NO COST! - We will register your home page with 244 search engines - NO COST! - Need a home page? We'll create & host one for you - NO COST! The ICI EXCHANGE (http://www.torontoici.com) is a world class online interactive

Hi all, I''m running into a very strange but incredibly annoying problem that I just can''t seem to solve. The exception is occurring from a seemingly innocuous line in my code, a simple ''logger.warn("some debug information")''. The backtrace follows: SecurityError (Insecure: can''t modify array)