similar to: Cisco 7936 Conference Phone - SIP or SCCP?

Hi list! I'm trying to configure the Kirk IP 600 wireless (DECT) system. The wireless phones are regular DECT phones, the Kirk IP 600 is doing the voip part by registering/gatewaying the phones to a callmanager server. The phones do not work and I think the problem is that they do not register at asterisk but I'm not sure because I don't understand a thing of the sccp/skinny

Hi, please tell me, is original skinny support in Asterisk stil under development or is better to try chan_sccp from http://chan-sccp.sourceforge.net ? my first try was unsuccessfull (chan_sccp compile OK, but module loading fail during Asterisk startup) and my phone (C7940) seems to be not supported in original chan_skinny :( PJ

I have a new asterisk installation (1.4.2) that is working fine with SIP. Now I'm trying to add 2 cisco ip phones (7960) running SCCP (latest chan_sccp). I have the phones booted, and the tftp directory all setup, etc. But the phones do not quite work right. When I lift the handset I only get a dial-tone 1 out of 5 or so times I try, though hitting the speaker button works. I can dial

I have some Cisco 7960's and want to use them with SCCP - I have gotten it working with a few different firmware versions but all seem a little flakey. I know that SCCP is not as solid as SIP but am wondering, which firmware version is advised for use with chan_sccp from http://chan-sccp.sourceforge.net/ -------------- next part -------------- An HTML attachment was scrubbed... URL:

http://chan-sccp.berlios.de/ 20050713 ftp://ftp.berlios.de/pub/chan-sccp/chan_sccp-20050713.tar.bz2 I didn't have a spare 7960 to use this week, so maybe some line issue is still present. - fixed a memory leak on database updates (dnd, cfwd*) - fixed old memory leak on unload (now unload chan_sccp.so and load chan_sccp.so work. It does reload the config when asterisk is running) - socket

Hi, I tried to connect cisco 7910 into asterisk system using chan_sccp.so. But I got a major issue : - when I called from 7910 to another sip phone in the same asterisk server, the call took place normally. - when I called from 7910 to another sip phone in different asterisk server, the call is answered but I cannot hear nor say anything. The phone just immediately lose its tone. - when I got

Hi! I have two, not too related questions: - the probably simpler one: if anyone can help me out using a Cisco 7905G with chan_sccp? I did already managed to get it working with a SIP image, I'd just like to see it work with this one as well. It's probably something I screw up with the configuration, as the phone registers, only I don't get any lines with it, although I have it

Any one knows where to install chan_sccp for asterisk 1.4 ???????. Please guide me from where can I download the asterisk 1.4 sccp channel driver and how to install it because I tried to get chan_sccp-mayday05.tar.gz When I trying to install it ,error happened like this. Please help me how to solve this issue. [root@XPL t]# cd chan_sccp [root@XPL chan_sccp]# make clean rm -rf

Hi list! I'm using phones that emulate a Cisco 7940 with chan_sccp. When I was using Asterisk 1.0.5 (bristuffed) I never had any such message on the console. The phones do work. Is this a bug in chan_sccp or a feature of asterisk 1.0.6? Thx!

Does anyone have the 7970 work with sccp? I have used the example configurations from the wiki. I can see that the phone is failing to retrieve the CTLSEP<MAC>.tlv file and then is able to retrieve the SEP<MAC>.cnf.xml file. The phone is hanging with the message "updating ctl". Thanks, John SEP<MAC>.cnf.xml: <device> <devicePool>

Hi All, I'm thinking of creating a new asterisk server using the latest 1.4 stable release to replace my ageing Asterisk SVN-branch-1.2-r7231 (its been a while!). My only concern - my phones are Cisco 7960's (with sccp firmware 7.2 loaded) and to support them better, I remember compiling in a skinny(?) driver to replace the (from what I could tell) basic in built sccp support. After

Hi All I'm trying to get my 7970 working on the latest head version of Asterisk without success, perhaps someone could help. I'm using the head version of Asterisk with the chan_sccp from berlios.de dated 7th August. The compilation of chan_sccp seems to have worked without any problem, however I'm pretty sure the problem I have is with the config files in TFTPBOOT:- With the 7970

I'm setting up a 7921 and now want to add a second line to the phone. In my SCCP.conf file I have: autologin = 235,299 However, on reloading SCCP the phone fails to login to the second line with this error: [Sep 12 12:46:49] WARNING[12224]: sccp_actions.c:185 sccp_handle_register: SEP001BD457F8B1: Failed to autolog into 299: Max available lines phone limit reached 299 Is there a

When I try to compile the new chan-sccp-easter2005 with asterisk 1.0.6 I get the following error on make: Now compiling .... chan_sccp.c 744 lines chan_sccp.c:67: conflicting types for `sccp_request' chan_sccp.h:1723: previous declaration of `sccp_request' sccp_pbx.h:5: storage size of `sccp_tech' isn't known make: *** [.tmp/chan_sccp.o] Error 1 I tried looking in

Hi All I have recently downloaded Asterisk and was so impressed I thought I would setup a home server and I went out and got myself a couple of cisco 7940's. (and a sipaura 3000!). thanks to various posts on this list and the voip-info site I have managed to get chan_sccp setup and working with the 7940's but the I tried to get the messages, services and softkeys working. It seems

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

Hi All, have some decent success on the 7920 "activation" in Asterisk. Latest status: chan_skinny does NOT work with 7920 chan_sccp does WORK with 7920 (!!) however: to remove coredumping the chan_sccp just comment out the MWI (messagewaitingindicator), then it compiles fine. Then change sccp_helper.c: return "P0060302" instead of the old value. and voila: Phone is

Ok I've got SCCP running I have my 7970 firmware files. Can anyone send an XMLdefault config and an SEP config file? There are a bunch of sbn files in the package...not sure what needs to be loaded. -Darren

Hi, Does anybody knows how to get this work? I have been searching all over and can?t find the way. Using chan_sccp tge phone can log in and has line tone. But the problem is that it is not able to receive nor dial out. Any help would be apprecieted. Thanks Javier --------------------------------- Sell on Yahoo! Auctions - No fees. Bid on great items. -------------- next part

Anyone have any idea what's causing this or how to debug it? I'm pretty sure the root cause is with chan_sccp.so, but not sure how to prove it. I recently upgraded from CVS-head to 1.2.1 and the chan_sccp from 12-17-2005. Now, once or twice a week, I get this on the console: Jan 31 10:39:08 WARNING[10586]: channel.c:784 channel_find_locked: Avoided deadlock for '0xbf1013e0',