similar to: Easiest (best?) linux distribution for dedicated Asterisk box?

I'll second that. I use Ubuntu, actually installed asterisk through apt-get. Too easy. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Mike Fedyk Sent: Tuesday, June 13, 2006 10:06 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Easiest (best?) linux

So I took a chance with an X100P knock-off on eBay. I'm running Asterisk + FreePBX on a PowerMac G3 (beige desktop) using Slackintosh 10.2 and kernel 2.6.16.16. Everything has been fine up until now. I compile the 1.2.5 Zaptel drivers without a problem, get the udev configuration in, modprobe zaptel, and finally modprobe wcfxo. At this point, I get the message: ZT_CHANCONFIG failed on channel

Hi list, Best Buy currently has an eMachine on sale for less than $300.00 without monitor. I didn't see any recent complaints on www.consumeraffairs.com. I didn't take the time to do a thourgh search so may have missed some. Red Hat hardware list does not have one eMachine listed. I went to eMachine's home page and found the following: AMD Athlon? BE-2350 dual-core processor NVIDIA?

I have recently built a new server using CentOS4. I've found one major oddity: time resolution is completely whacked. I'm not using an external time source nor am I relying on NTP for time resolution. For some reason, time on this server moves forward at a far more rapid rate. Right now, all my other systems show Sunday May 8, 3:19 pm. The CentOS server thinks its Monday May 9, 3:54

Hi all, We have put together a firmware for a range of inexpensive routers. It has been configured to provide optimum VoIP performance. We have internally tested it for number of months and it looks very good. You should be able to run it easily with 20+ phones on local network ( we still did not hit the upper limit ) assuming that you have bandwidth. Your VoIP will get prioritized over other

Hi, I'm fairly new on codecs, I'm trying to implement a communication between two PCs. The data rate should be of approx. 6Kbits/s, this 6Kbits/s can just be the useful data. Any encapsulation (for example UDP , RTP, etc ...) can be present even if that means to rise the overall bit rate. Also if this rate can be achieved on Asterisk. For exemple I've tried to change de rate on

I'm trying to boot Fedora Core 5 Test 3 from either CD or DVD, (which uses ISOLINUX), and I get the error messages: Unknown keyword in config file Could not find kernel image: linux boot: There are at least two other people in the world with the same problem. Unfortunately, all of the rest of the Fedora test community doesn't seem to have a problem with it, so its not a high profile

Hi all, Any one tried installing Asterisk on Linksys WRT54G? We have but facing problems with SIP to SIP calls. The phones ring and calls are established but we cannot hear any voice at all. I tried allow=all in the general section but did not work. So I forced ulaw. Can any one please check it out and let me know what is wrong? Here are the conf files: Asterisk Version: Asterisk

Hello to everybody, does anybody knows how to install Asterisk on a Linksys WRT54G(S)? I had read in the Wiki that it is possible. If somebody has a tip, this would help me very much. Regards Bastian

Hello all, I have my * server setup behind a Linksys WRT54G on Adelphia cable. I have forwarded 5060,10000-10020, and another port set can't remember off the top of my head but I can't seem to connect to the * server from any locations that are direct connects to the Internet. Am I missing a portset for forwarding? If I use the name service (voip.*****.com) from my home connection on the

Hello, I am not able to open the web interface for the wrt54g router on the lan. Which port does it use ? Thanks Varun

Ok, I've done some more research and I don't think I want an FXO box... What I'd like to do is use BroadVoice (with their BYOD plan) and then run Asterisk on my WRT54G router. I'd also like to use my regular home phones without having to use a special "SIP" phone... (eg. I like my Vtech normal cordless phones) What do I need to buy to get this working? It sounds like I

Hi folks. Please don't flame me but I've been googling around for days, read a tremendous amount, tried everything, and still no go. This is most definitely a typical newbie question. - I sure hope there's somebody(s) out there who'll humble themselves to help me out. I've set up an 'out of the box' basic Asterisk server running on Slackware Linux. - It basically

Hi, I've just installed asterisk 1.2.1 on my openwrt distro ( I own a WRT54GL by Linksys ) . No problem by now, but I can see that my 3 snom 320, once they started they send subscriptions to asterisk, and I can see that running: sip show subscriptions But, after one hour about, OR when I do asterisk reload , asterisk losts all th snom subscriptions. Someone can help me please? Thanks

Hello everyone.... Searching the archives and google always comes up with entries regarding the "dyn" dns option in the 7960, but I can't find answers to my specific question.... My 7960 is connected via cable modem and is NAT'ed (everything is working fine). On the 7960 under SIP configuration\NAT Address I have the public IP of my cable connection. Comcast gives me a

Did anyone see the article? It''s the first time I really noticed that these little Linksys routers are such a fully fledged linux machine with a decent processor and a replacable firmware. I am now itching to get one to replace the multipurpose firewall desktop machine. Has anyone experimented with the current state of the firmware and how advanced you can get with tc rules? For

I''m not subscribed to the users list but I''ve been reading the archives. The OP should NOT try using bridging with either FC 3 or FC 4 at this time because the combination of Netfilter and bridging is currently broken in the kernel''s included with those distros (as reported in another thread on the list). -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently

Hello All, I would be grateful for some help with this issue. I have gotten Asterisk to work with Broadvoice on outgoing calls only. When I try to call my Broadvoice number from another location I get a caller is busy message. My Asterisk box is behind a Linksys WRT54G. Could this be the problem? On the Linksys, I have port 5060 forwarded to the asterisk box 192.168.1.2. I have tried not

I'm trying to setup Asterisk on my Linksys WRT54G router and it appears to startup successfully (no errors) and it says it is listening on 0.0.0.0 port 5060, but I am unable to connect to it. I've tried "telnet localhost 5060" but it just says connection refused. I've also tried connecting from another machine on my network (eg. telnet 192.168.0.1 5060) but it also says

current setup SIP phone 192.168.1.30 --> linksys wrt54g sveasoft -- INTERNET -- (xl0) Firewall (xl2:172.16.0.50)--> (em1:172.16.0.101) Asterisk problem is RTP stream not oging trouhg from * to sip and vice versa. #1 and asterusk is pushing 192.168.1.30 back to linksys with 172 as return address.... or #2 asterisk trying to get back to me as 192.168 on public internet.. got