similar to: RxFax & Asterisk possible bug?

Hi all, My BRIstuffed 0.2.0-RC7k is running fine on my debian box for voice calls over ISDN2. Now I want to implement receiving incoming faxes into my setup so I did a google and some reading on the wiki. I got the spandsp 0.0.2pre10 package compiled and installed, patched asterisk's apps makefile and compiled * again. This all worked out fine. When integrating the RxFax into my dialplan the

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

Hello, I have problem to make SIP calls, i have asterisk + PC InterP4 + Digium TDM400P here is the content of the sip.conf: [SIP_PROVIDER] type=peer fromuser=testcomclient username=testcomclient secret=testr host=IP_SIP_PROVIDER ;dtmfmode=rfc2833 context=interne canreinvite=no ;allerid=Beer disallow=all allow=ulaw allow=gsm allow=g723.1 ; Asterisk only

Hello! We use RxFAX, version 0.0.2-pre26 over ISDN and it mostly works well. Occasionally we get .tiff files that are not convertible with tiff2pdf. This may occur if the connection is interrupted, I guess, but we also saw cases where the sender seems to have got an OK but the .tiff is not readable anyway. Therefor I'd like to check the return of the rxfax command a bit closer, but there is

Heres something that's making me scratch my head... I'm using RxFAX on ISDN lines and in-general it's going well. However, there seems to be a case when the fax doesn't get delivered, but looking through the CDRs it seems that the call happened, RxFAX was executed .. time passed (1-2+ minutes) then hangup. I'm wondering if some FAX machines just hangup after the call

Hey All, I am attempting to get the RXFax app working and having a hell of a time of it. I am hoping that some of you fine folks can help me out. I have installed Asterisk v1.2.14, SpanDSP v0.0.2pre26 and app_rxfax. All compiled and installed fine. When I attempt to call the extension I have created for receiving fax's then I get the following error once just as the rxfax

hi, I am on fax-to-email system, basically taken from http://www.voip-info.org/wiki-Asterisk+Fax+to+email well, it seems that asterisk causes some problems so that it is impossible to send any fax. I.e. when I try to send a fax to asterisk (rxfax application): normalFax--->FXS(TDM400P)--->Asterisk(RxFax) it breakes up the trasmission at the beginning of sending page. The code given by

Hello i would like to receive incoming faxes thru' asterisk as tiff files thru' the rxfax application. I setup extensions 101 like this exten=> 101,1,rxfax(/tmp/fax.tif) then from CLI i run: dial 101 and rxfax send me his "scream" about the fax ^^ instead when i send a real fax from a faxmachine to that extension my 101+rxfax is executed but it just "does

is /usr/local/sbin/mailfax flagged to 755? ________________________________ Von: asterisk-users-bounces@lists.digium.com im Auftrag von Rob Danz Gesendet: Mi 13.07.2005 17:17 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] SpanDSP rxfax, no tiff. Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the

Hello All, I have downloaded and installed spandsp and downloaded rxfax, etc and rebuilt asterisk with app_rxfax. I have added the following to my extensions.conf: [macro-faxreceive] ; ${ARG1} - sendto e-mail exten => s,1,Wait(2) exten => s,2,Answer exten => s,3,SetVar(FAXFILE=/var/spool/asterisk-fax/fax-${MACRO_EXTEN}-${TIMESTAMP}) exten => s,4,SetVar(EMAILADDR=${ARG1}) exten =>

Hi, I noticed a strange behaviour: Faxing using spandsp (TxFax) from my asterisk box to my old, common fax machine at home works fine. Faxing from the same box to my office pc-fax (Hylafax) also worke fine. Receveiving faxes on my asterisk box using spandsp (RxFax) also works fine. It is a PSTN number connected to the digium card of that asterisk box. Then I faxed from my asterisk box (TxFax)

Hi Steve, You are a legend !!! It is properly disconnecting now. Although I am having problem with the fax detection. Somehow fax will only be detected if NO CLI was sent from the PSTN line but if the line received the CLI, fax tone is ignored. Does anyone had the same experience? Is there any workaround or fixed for it? Rey > Message: 11 > From: Derek

Hi, using HFC cards, mISDN/chan_misdn and spandsp lib fax retrieval works, but some log file entries are missing. There should be one of the lines: Fax successfully received. Fax receive not successful. Dail Plan config used: [fax] exten => _.,1,SetVar(FAXFILE=.............) exten => _.,2,SetVar(LOCALSTATIONID=......) exten => _.,3,rxfax(${FAXFILE}) exten => _.,4,NoOp,XYZ exten

Hello: I have been using the asterisk system now for almost 5 months. I'm very happy with it's performance, however I have been using the RXFAX on and off for the last month or so. I gave up after a while and just had it route to my analog fax machine in the fax context. However, I have always had the implementation that it would go to a macro.. macro-faxreceive, and to the rxfax of the

Hello Usersks, foreword: i saw a thread on Asterisk-Users list about this problem, but it seems that there were no solution: http://www.mail-archive.com/asterisk-users at lists.digium.com/msg167757.html Therefore, I relaunch this thread. ------- Here it is: I have the same behavior. 1) I never got installed spandsp before. The version that I have installed is 0.0.4 (strangly labelled 0.0.3 inside

Hi, I am using spandsp-0.0.4, tiff-3.8.2, and agx-ags-addon with Asterisk 1.4.18. Everytime rxfax executes, Asterisk crashes: -- Executing [fax at phones:1] Set("Zap/2-1", "FAXFILE=/var/spool/asterisk-fax/1207322398.0.tif") in new stack -- Executing [fax at phones:2] RxFAX("Zap/2-1", "/var/spool/asterisk-fax/1207322398.0.tif") in new st ack [Apr 4

Hi Everyone... I am running Asterisk 1.2.22 on Debian "Etch". I installed it from sources. I have also installed tiff-v3.6.0, spandsp-0.0.3. and downloaded http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_rxfax.c http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_txfax.c and a Digium TDM card with 4 FXO ports When my dialplan

I have no analog line interfaces on my asterisk system, but I do have two UK 0870 numbers routed to two separate VoIP accounts (one with FWD, one with gossiptel). Asterisk is configured to register with these accounts. I get voice calls through just fine this way. I thought I could get one of these 0870 numbers to route through to rxfax, thus allowing folks to fax me directly. I've set up

Hello. I just emerged spanDSP with all the packages needed. After a bit of configuration i was read to test. But i get this errormessage stating that application rxfax was not found. I could't fint rxfax i teh modules directory. I use asterisk 1.0.7. I did reset the server after emerging SpanDSP I use gentoo kernel 2.6 I don't know what else to do. Regards, Arne Morten

Hi, I'm having problems with the rxFax app. One of the messages that appear in my console is: Executing Set("SIP/something", "FAXFILE=/var/spool/asterisk-fax/1137692307.5.tif") in new stack -- Executing RxFAX("SIP/something", "/var/spool/asterisk-fax/1137692307.5.tif") in new stack Jan 19 12:38:30 NOTICE[12008]: channel.c:1906 ast_read: Dropping