similar to: no dialtone on channel banks

Is there a way to reduce the volume of the dial tone on a zap channel? I don't want to reduce the audio volume on calls so txgain in zapata.conf will not work. I am having problems with asterisk not recognizing the first dialed digit from an analog phone about 8-15% of the time. Once the dialtone goes away, the digits are always recognized. Any other thoughts on how to solve this are also

Hello, I'm running * on a very basic configuration. I have a Wildcard TE405P with the first T1 connected to a PRI line and the remaining three to Adtran TA750 channel banks with FXS modules. I successfully configured everything to work with a couple of Swissvoice IP10S handsets (MGCP) and analog extensions connected to the channel banks. The problem I'm having is that when I pick up any

Hello, Does anyone know what may be causing this? Asterisk was built from cvs tonight. Ztcfg also says us is an invalid tone zone. Anyone got some information on what this is, why is it happening, and possibly some solutions? [root@anistonetech zapata]# asterisk -f -d DEBUG[1024]: File config.c, Line 653 (__ast_load): Parsing /etc/asterisk/asterisk.conf DEBUG[1024]: File config.c, Line 653

Hello - I have a Premisys Slimline Channel Bank connected to a Digium TE110P. I am not able to call the FXS extensions or get dialtone on them. The channel bank is connected via a T1 crossover to the cable and lights show green. I really need to get this functioning by end of day. If anyone can help me out I would be greatly appreciative. Thanks, Dave zaptel.conf loadzone =

Hello, I'm running * on a very basic configuration. I have a Wildcard TE405P with the first T1 connected to a PRI line and the remaining three to Adtran TA750 channel banks with FXS modules. I successfully configured everything to work with a couple of Swissvoice IP10S handsets (MGCP) and analog extensions connected to the channel banks. The problem I'm having is that when I pick up any

Folks, I recently swapped a TDM400 FXS card that was working perfectly into a new server (running recent CVS), and it's either misbehaving (unlikely), or I've missed something obvious (much more probable). Everything seems to be working, but I can't get any dialtone from it when I plug a phone into any of the 4 ports!! All of the jacks are lit (green lights) but they all seem dead

Hello all! I have tried and tried to resolve this one to no avail. Hopefully one of you can help... The system in question is a Compaq Evo D600 (iirc) business desktop, with a 1.4GHz Pentium 4 and 512mb of RAM, running a stock install of PoundKey 1.2. It has two Digium cards installed: a TDM400P with four FXO modules, and a TE110P hooked to a Carrier Access Adit 600 which serves 8

Hi everyone, Sorry for forwarding and top-posting this email again but its as if my TDM40b has keeled over yesterday. After a few hours last night and swapping the card to another asterisk server (with exactly the same result) I needed to have the FXS ports working ASAP this morning so I have repaced the functionality of the TDM40b with some Grandstream handytones which I already had in

I'm having problems enabling stutter dialtone for users connected to channel banks. Half of our users are on iaxy's and the other half are connecting to channel banks. The users on ixay's are getting the stutter dialtone on new voicemails, but the ones on the channel banks are not. Currently, all users are in the default context in the voicemail.conf file. I've tried the

Hi guys, I posted a somewhat similar question about a month ago and got a thoughtful resonse from Steven Critchfield, but I've got a quick follow up question to it. I'm looking to setup a 16 extension / 10-14 phone line Asterisk install for a customer who would like to have DID numbers for the extensions, since they're currently on Centrex and already have the 1-to-1

I bought an Aastra PT480 from digium, but I wanted to see if I could get some more help with this before Monday. Any help would be appreciated. I have the phone connected to the TDM400P card, and I also have the T100P and the X100P in the same box. My problem is, it appears as if the phone and asterisk can't understand each other. The port the phone is connected to always remains

Hi, I have two asterisks connected via IAX2 trunk. The first * use dial prefix 2XX, the second one 3XX. Calls routing works OK. But I don't know how to get dialtone of remote asterisk pbx. I'd like to get dialtone of asterisk #2 after dialing 3 and dialtone of asterisk #1 after dialing 2. I know something about DISA but I'm not sure if it is a right way. Can you give me advice?

Hello, I created a new application for myself called Dialtone() by modifing res/res_indications.c file. It can be used as such: exten => s,4,Dialtone(30|${CALLERIDNUM}) exten => s,5,Playback(time-exceeded) exten => s,6,Goto(s|1) It will stutter if you have new voicemail and you have passed the mailbox number as I did above. It will stop dialtone the moment you press a key

Hi List, I cant seem to find the setting that changes this! You put a person on hold, they are on hold like normal, but after a few seconds the phone will then start having dialtone coming from the speakerphone, really weird!! Anyone know how to fix this? I see where it could be nice, but in this case, we just want them on hold is all, no dialtone! Any help would be great! Thanks! Ron

I'd like to write a snippet of dialtone that plays dialtone and collects a specific number of digits into a variable. Sort of like READ but with a generated dialtone. Naturally, I want the dialtone to stop playing after the first digit. I can't find this anywhere. Only thing I can think of is a no-password DISA. Is this the correct method? Is there a better one? </edg>

Hello, Here's what I'd like to do: call my Asterisk box from a phone, hangup after a few rings, then Asterisk calls me back and presents a dialtone, than I can dial any valid number in the context the call originated. I've done it with CAPI (thanks to the script on http://www.junghanns.net/asterisk/page14.html), I'd like to do it with H323. Problem is, how to present a

Hi, I see applications for signalling busy, congested, ringing, progress etc, which I understand can be provided either in or out of band. But all I want to do is generate a dialtone. This obviously can only be done in band. There is code for generating the tones when you have a physical line, like the alsa channel, or a zap channel. But I'm just thinking of if they've selected an option

Hi, I'm having a little problem when trying to make a call from asterisk. I connect a SIP phone to asterisk, and in the asterisk box I have a TE110P card connected to a E1. When a SIP client makes a call through the E1, I received no dialtone in the SIP client. In the same manner, when somebody from the POTS network makes a call to a SIP client (through * and the E1) he doesn't receive the

Is there a way to generate an old-fashioned dial tone with Asterisk? I'm thinking of one that sounds like: http://www.seg.co.uk/telecomm/dialtone.wav -- Phil Reynolds o ____ mail: phil at tinsleyviaduct.com |L_ \ / Web: http://www.tinsleyviaduct.com/phil/ (_)- \/ Waltham 66, Emley Moor 69, Droitwich 79, Windows 95

extensions.conf has ignorepat => 9 exten => _9X.,1,Dial(Zap/G2/${EXTEN:1}) The first user to try it asked if instead of keeping the same dialtone after pressing 9, if I could play a different dialtone. Can this be done? I'm running asterisk 1.0.0 in case that matters.