similar to: zap calls drop suddenly + tremendous noise when answering a call

I've been monitoring this problem for almost a month now. I realized that it is more extensive than what I described previously. I can very easily replicate this problem on every Zap channel. Following is the senario: 1. Call Zap/5 via say SIP/15 -> Zap/5-1 created and starts to ring 2. Call Zap/5 via say SIP/21 -> Zap/5-2 created and starts to ring 3. Hangup SIP/15 ->

Hey everybody, I've, within the last 3 weeks, moved over to a PRI from SBC/AT&T. I've received several complaints about dropped calls. Reviewing the archives on PRI and dropped calls shows that I should set the resetinterval=never in the zapata.conf and restart. This hasn't helped. The dropped calls have to date only been on outbound calls. Usually within 2 to 3 minutes

Hi all, I've been running Asterisk with a TDM400P for about 6months, no problems. 2 in/outgoing analog lines, one analog phone. Recently I was messing with the XTEN client, got to finagling with things, and not knowing what was wrong I upgraded from 1.0.7 to 1.0.9 (both asterisk + zaptel). I was testing various things, and found everything worked except outgoing calls. So I checked

Hi, Does any one experience that SIP phone to SIP phone (Polycom phone) calls can't hear each other, but Monitor application records both end's voices. It also happens in group pickup calls. Zap calls to queue (Local channel) also experience this problem (sometimes, our SIP phone can't hear any voice from incoming Zap calls when pickup, sometimes this happens after 10-50

I am new to Asterisk and the protocol/language complex world of VoIp and PBX. But I have a dedicated machine running A@H 2.8, a single TDM400P with one FXS module card connected to a standard analog phone. The second card is an X100P connected to my analog PSTN phone line. I also have Grandsteam IP phone plugged into the network and a couple of x-lite SIP softphones. I can make outgoing calls on

Hi There. I have the following setup : Asterisk 1.2.4 , freePBX 2.0.1, spandsp-0.0.2pre24 My problem is as follows : If I set up a very simple extensions.conf. when I dial from a fax machine, it seems as if no fax is being recognised. If I answer the call, I can hear the fax machine beeping. extensions.conf :

Using tdm400. While transfering a call from outside to another extensions, while this "outside call" is waiting with music, the "another extension" call hangs up suddenly, and the call is back to the "outside call" suddenly. Wathcing logs: Jan 15 13:32:44 DEBUG[30148] res_musiconhold.c: Read 462 bytes of audio while expecting 640 Jan 15 13:32:55 DEBUG[27850]

About once a week or so my Asterisk box stops responding to all phones. I can pull up the console, do whatever I want at the CLI but the only way to get things working again is to restart Asterisk altogether. I finally cranked verbose & debugging way up (and watched my log files go from 1mb/day to 100mb/day), but below I believe contains my problem. The next line is 1.5 minutes later where I

hi, after upgrade from 1.0.x to 1.2.x i cannot send faxes my topology: PSTN<-wct4xxp-asterisk- -sip- ata (ht496,ht488,asus vp100) - samsung sf2500 fax log: Feb 13 23:50:35 DEBUG[27914] chan_sip.c: Allocating new SIP dialog for 20d700003cb20000@192.168.1.209 - INVITE (With RTP) Feb 13 23:50:35 DEBUG[27914] chan_sip.c: **** Received INVITE (5) - Command in SIP INVITE Feb 13 23:50:35

Hi, I have debian etch 4.0 machine (2.6.18) with two TW-ISDN PCI (Hfc) cards. I use bristuff-0.3.0-PRE-1y-e (asterisk-1.2.17,libpri-1.2.4,zaptel-1.2.16). I also have patched zaphfc with zaphfc_0.4.0-test1_florz-13.diff.gz (I load module: insmod /usr/src/bristuff-0.3.0-PRE-1y-e/zaphfc/zaphfc.ko modes=1 debug=1). So i want to test two cards and make loop between them. So one card would be NT,

I have a very serious problem with calls between PAP2-NA and a TDM2400 (8 FXO). Almost every call dropped after between 20 and 30 seconds with conversation. I disable the sound card, serial and other things on my server, but the problem still continues. I've changed the RPT Packet Size to .20 on PAP2-NA, but nothing. Here a piece of my log: [Jan 31 07:10:43] DEBUG[3131] channel.c: Hanging up

Hello, I'm running Asterisk@home 2.5 asterisk 1.2.4 zapatel 1.2.2 libpri 1.2.2 on a Dell Poweredge 2850 (1 CPU) with a TE210P I have 2 t1 circuits using NFAS with dchan on 24 and no backup dchan. I am able to receive inbound calls on all channels and can only make outbound calls on channels 25-48. Attempting to make an outbound call on channels 1-23 results in congestion.

Hi there! Trying to originate and dial a number using Zap-8, used to work, but now it just fails. I enabled all debug I found in the source-code and this is the output from asterisk. Can someone understand something from the debug-output what is wrong and direct me to what the problem might be? The setup is correct, trust me, it worked some hours ago, haven't changed anything. Just dialing

We are having an issue with transferred calls being dropped. Looking at the asterisk 1.2.10 logs, it appears that when it is dropped, the SIP unit send a CANCEL message to the server. On successful transfers this is not seen. The errors logged in the SIP Unit error log, I believe are from the second attempt to transfer the call, after it has actually been disconnected. Nothing is

Hi, sorry for the long debug output below. I configured Asterisk with AMP to send the whole number including the extensions of the callers to the called party. Whatever I configure in AMP it looks like it is used, In my eyes it is ok, but doesn't seem to work. 033811234451 is the call id i configured, and it seems to use them, but the caller will only see a 0338189040 instead of my

Hi asterisk-users, We are using Asterisk 1.2.12.1, and are trying to use the Page application. It seems to work but after approx 4-5 seconds the call is hung up. The dialplan code look like this: exten => _*2XX,1,AGI(get-paging-devices.agi,${EXTEN:2}) exten => _*2XX,n,GotoIf($[ "${PAGING_DEVICES}" = "invalid" ]?i,1) exten => _*2XX,n,SIPAddHeader(Call-Info:

Hi All... Well, I'm still experiencing LOTS of dropped calls since installing the new (non pri) T1 here... I keep noticing a few things in the logs when this happens, namely the "Wink/Flash" statements and the "Didn't get a frame" messages... Anyone got any ideas on if this is a telco issue, a wiring issue, or an asterisk issue? Been trying to track this down via all 3

I am running Asterisk 1.2.14 and Zaptel 1.2.12 and using a Digium TE110P card in E1 mode. I've recently noticed in my logs the following Jan 5 01:27:11 VERBOSE[22490] logger.c: [chan_zap.so]Jan 5 01:27:11 VERBOSE[22490] logger.c: [chan_zap.so] => (Zapata Telephony w/PRI) Jan 5 01:27:11 VERBOSE[22490] logger.c: == Parsing '/etc/asterisk/zapata.conf': Jan 5 01:27:11

hi i'm trying to configure a TE205P on asterisk@home i've edited /etc/sysconfig/zaptel adding this line: MODULES="$MODULES wct2xxp" now, when the system is loading, i can see that the wct2xxp module is loaded correctly but if i try the command: /usr/local/sbin/genzaptelconf i get: STOPPING ASTERISK STOPPING FOP SERVER Generating '/etc/zaptel.conf' Generating

Good Morning, I've recently gotten Asterisk installed and configured our IVR using FreePBX. Things seem to be going well except a few of our inbound callers are ending up in the wrong place when trying to connect to a specific extension. The example I had this morning was someone trying to call extension 212 and getting connected to the Sales queue which is option 2 on the IVR. I looked in