similar to: Good ATAs from companies other than Sipura/Linksys?

I'm looking for an ATA\Voice Gateway that runs IAX and has several ports (8 would be nice). I am looking to avoid devices that use the same firmware as the ATCOM devices as I found them to be buggy (and a PITA to find the proper update). ---------- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed...

Voxilla news story: http://voxilla.com/voxstory84-nested-order0-threshold0.html Two new products * A Sipura 2000 in a linksys box: Linksys PAP2 Phone Adapter * A combination NAT router with 2 FXS ports: Linksys RT31P2 Broadband Router Jim James H. Thompson jht@lava.net

2 Asterisk servers 1.2.12.1 Connected via IAX2, same switch, GigE, no packet loss, etc 1 with a Sangoma A101 for a PRI to the PSTN Ulaw QoS enabled NAT for the registered ATA boxes, no nat between the * servers Faxing inbound: Call from PRI hits the first Asterisk server Then talks to the 2nd via IAX2 NVFaxDetect receives the fax, converts to PDF and emails it out Works great!

Hi all, i need sample xml configuration files for linksys pap2, linksys pap-2t, sipura 2100, sipura 2102, 1001, 3000 and 3102. All of these are linksys/sipura products. So if anyone has these sample files then plz share. -- Best Regards Rizwan Hisham Software Engineer Axvoice Inc. www.axvoice.com -------------- next part -------------- An HTML attachment was scrubbed... URL:

I was having problems getting a Linksys PAP2T-NA to work with Pitney Bowes mailing station so it could use its modem to dial home and download postage/software updates. After scowering the web, I couldn't seem to find a definite how to article on what settings were needed. I finally came up some settings by combining the information from various places around the 'net. I have typed out

Fry's Electronics has a new Linksys 2 line ATA box for sale for $59.99 retail. They have a version with a router for $89.99. We picked the non-router version up and it seems to be a rebadged Sipura SPA-2000. The box has a Vonage service package inside as well, but it does work with other services. The box also has a "User Guide" meant for end-users that is very well written [no

Hi, Can someone explain to me how ATAs operate in a call shop type environment to provide realtime billing to the callshop software. The ATAs seem to be configured to connect directly to the asterisk server, so how does the call shop software report in realtime your destination and duration of the answered call? Thank you, AC -------------- next part -------------- An HTML attachment was

Whoo hoo! I just received my WIP300 from voipsupply. I have to let it charge before I can play with it. A few quick comments: - I started a Wiki page at voip-info to post issues, firmware news, etc. I really like the wealth of info on the GXP-2000 page, so I wanted to start something similar for this phone. http://www.voip-info.org/wiki/index.php?page=Linksys%20WIP300 - My kit

Hello I am going to try the new Digium Fax for Asterisk product. I'm planning to connect fax machines to Asterisk (currently 1.6.0.9) via T.38 ATAs. I'm looking at Grandstream HT502 or Linksys SPA2102 ATAs. If anyone has any experience with these devices, or other recommendations, I would be grateful if you could share your experiences. Regards Ian

Should a Linksys Sipura 2102 be configured with nat=yes even if it is on the local network? I have been having some troubles with a Linksys Sipura 2100 series, which suffers from NO AUDIO after a few calls.. Because it is on the same subnet as Asterisk it is configured with nat=no. When you think of it because the Sipura 2100 is a broadband router, the voice part may be considered as being behind

Hi, Through our reseller, we couldn't get any clue to Linkys-Sipura products error codes. This keeps us from analysing Syslogs. Has anyone a clue to get this error codes and their meaning ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061017/eb5e3bbe/attachment.htm

I was just browsing my local suppliers list of headsets - not a single one with a single 2.5mm jack. Either USB or 1-2 3.5mm jacks. Can anyone recommend a headset that works with e.g. SPA-921 and -941? /Per Jessen, Z?rich

I'm going to be deploying around 30 IP phones with Asterisk in the near future. I've tentatively settled on the Linksys/Sipura SPA9xx family. I am unclear on the notion of "lines" in the context of SIP phones like these. The SPA942 model has a 2-line-to-4-line upgrade available, but I don't know why I'd need to purchase it. I have tested a SPA942 with Asterisk, and

I have two old Sipura 3000 original (green) boxes and they are running perfectly faxes going through, no echo. Firmware 2.0.13(GWg), hardware 2.0.1(1813) Does the number in the bracket means anything? In addition I have Linksys 3000 running the same firmware and same hardware (except the number in the bracket). I can not get to work correctly. The unit has a lot of echo, can not get rid of it,

Will the DAHDI with OSLEC have any effect one ECHO in Linksys or Sipura adapters? I know Dahdi is a replacement for Zaptel. And Zaptel is mostly for internal cards not external units like Linksys. I have one Linksys 3K that with so echo so bad that it is pretty much useless. -- Joseph

I have a Linksys Sipura SPA2102 connected to Asterisk 1.4.27 and sometimes it doesn't connect at all. I keep getting a busy signal when I try to dial. It appears to happen most often when both lines are registered. The 2 lines on Linksys lines also use different ports. Does that mean than it is necessary to configure the 2nd line with port=5061 in sip.conf, or can they both use 5060? Thanks

We have issues with all of the SPA-2000 ATAs we have where incoming calls from only one of our Asterisk servers do not complete. Details: 1- On the CLI we see that when the call is pushed to the ATA it shows Busy/Congested 2- We can make calls to this same server just fine 3- We can receive calls from other Asterisk servers running older CVS versions of Asterisk with the same exact ATA

Greetings list, Does anyone have any experiences they'd like to share deploying these phones in medium-size asterisk setups, e.g. 40+ users? I have a project coming up to deploy 100 phones over 2 offices and the client rather likes these phones. Are there any obvious pitfalls/configuration difficulties/quality issues etc. using these phones? If so, what alternatives would people suggest with

Greetings, I'm looking to purchase 10 Cisco 186 ATAs. Please send me quantities available, payment methods and "out the door" pricing (shipping + tax + unit costs). -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060605/742237a1/attachment.htm

Are there ATAs that allow different phone numbers from one network connection? Such as supporting multiple IP addresses so that each RJ11 has a different extension or some other way?