similar to: In-bound faxing working ~1/3 of time.

Hi, all. I've got a fax extension in my extensions.conf, but spandsp never sends my faxes there. Both applications -- txfax and rxfax -- are registered by Asterisk, so they compiled and installed correctly. I've got a Sangoma A104 card, and (as some people had suggested) have loaded ztdummy. Everything seems fine, except that it never gets recognized as a fax. I've even turned off

Hey, all. I quoted a customer about $100 for some cheap SIP phones. I was planning on using the BT-102's, but he called said they look like "Princess phones," and I have to admit that he has a point. Some of the other inexpensive phones look decent, but (for example) the SPA-841's wiki entry says the remote end gets a lot of static. Since it'll be being used from a noisy

Hi, all. Got my Uniden UIP200 today (ordered from thetwistergroup.com), and was very excited to set it up... until I came to the realization that there were no docs with it whatsoever. There was, however, a sheet of paper with the stock warnings (don't use the phone in the tub, etc.), AND a URL -- for documentation. Score! Well, no. The URL it gave me, bcs.uniden.com, does indeed have

Hi, all. I want to have a button on my receptionist's 601 that, when pressed, will forward her current call to a given extension. Is there any way to do that? I've tried to RTFM, but I'm coming up empty. Thanks, -Ken D'Ambrosio

Hi, Recommending to go Digium because of an OpenBSD issue with the Sangoma A104D is quite funny to say the least since neither is the TE407P supported in BSD by Digium. So the recommendation is useless to the person who originally requested for a comparison between the two products. If someone wanted to send back the A104D, he could have taken advantage of Sangoma's 30 day money back

> Post your extensions.conf and what's on the CLI (asterisk -r) As requested: # cat /etc/asterisk/extensions.conf [incoming] exten => s,1,Answer() exten => s,n,NoOp(CallerID is ${CALLERID}) exten => s,n,NoOp(DID is ${DNID}) exten => s,n,Background(enter-ext-of-person) exten => 1625,1,Playback(digits/1) exten => 1625,n,Goto(digits/1) exten => i,1,NoOp(CallerID is

Hi all, as good? I try to install asterisk-1.2.14, zaptel-1.2.12,libpri-1.2.4,addons-1.2.5 , sounds-1.2.1 and wanpipe-2.3.4-3 and hwec-utils-beta4-2.3.4 But it is not compiling drivers of the Sangoma, why udev's for board in "/dev/zap"(1-31, channel,ctl,pseudo,timer) is not created. But when I install a board TE110P Digium, udev's is created and asterisk functions perfectly. : )

[Please excuse if this is a repeat; I initially tried to send it from a different account, and it's been held up for a couple of days awaiting moderation.] 1) What's the absolute minimum required (hardware-wise) in order to get one in-bound POTS line into Asterisk, and then have IP phones "inside?" [In other words, I obviously need a NIC -- but what would be the

Hi, I am facing an audio-problem with the dial application and I (!) think, that it is connected to the dahdi parameter "overlapdial=yes". Sangoma support does not see any connection between this. But when enabling this option I face with some(!) dial-partners a audio one-way issue (the called party can not be heard). Only using PSTNS (germany e1 trunk) - no voip. Is there any

Here's my planed setup : PRI from telco <--> (port 1 of A104d) * (port 2 of A104d) <--> PM3 The PM3, for those who don't know is lucent's portmaster RAS dial-up router. I had setup asterisk, zaptel, libpri, wanpipe (as I have sangoma's cards). In wancfg, I have port 1 as TDM_VOICE, with hardware echo on, span 1. Port 2 is TDM_VOICE, without hw echo, Clock as

I have a system that I am trying to get a port on a Sangoma A104d card connected to an Adtran 850 with 5 FXS modules and 1 FXO module. A problem I am having is figuring out what cable should be used from the port on the Sangoma to the JP2 port on the Adtran. Tried was a cross-over T1 (1->4, 2->5, 4->1, 5->2) as well as a straight T1 (1->1, 2->2, 4->4, 5->5). Neither one

Hi, I haven't seen this situation described anywhere. We have an Asterisk server configured with 2 T4XXP cards and a TDM400P. We are using spandsp's txfax to send faxes on one of the E1 channels. The calls originates and the faxes start talking to each other for about 10 seconds. Then they just stop. The line stays up for a while after that until the remote end hangs up. The local line

I need your help I have a sangoma A104D on my dell server; I got card status ok with no alarm If I dialed the extension 6210006, it shows the output as stated below, but there is no ringing from the pstn number nor the iax softphone am using on my pc. I will be glad if someone can give me a working config? What I want to achieve is to send all my call to the pstn on A104D? The pstn am

On Tue, Oct 20, 2015 at 11:59:03AM -0400, Ken D'Ambrosio wrote: >On 2015-10-20 05:33, Martin Kletzander wrote: >>On Mon, Oct 19, 2015 at 03:57:39PM -0400, Ken D'Ambrosio wrote: >>>Hi, all. Ubuntu host, attempting to get virsh working with >>>VirtualBox... and failing. Here's what happens: >>> >>>root@foobox:~# virsh -c vbox:///session list

This probably came up before, but I have a faxing question for everyone. I have a simple extension setup to use rxfax to receive faxes sent to asterisk. It is: exten => s,1,Answer() exten => s,n,AbsoluteTimeout(300) exten => s,n,Set(FAXFILE=/var/spool/asterisk/fax/${ARG1}_${CALLERIDNUM}_${UNIQUEID}.tif) exten => s,n,rxfax(${FAXFILE}) exten => s,n,System(/usr/bin/mailfax

Full_Name: Rob Cranfill Version: 2.8.1 OS: Windows XP SP2 Submission from: (NULL) (130.76.32.19) Using the Windows installer for 2.8.1, partway through the process there is a dialog that looks something like this: ---------------------------------------------- Display Mode Do you prefer the MDI or SDI interface? ------- Please specify MDI or SDI, then click Next. (*) MDI (one big

I have asterisk with rxfax txfax modules.I want to test fax sendig and reciving in one asterisk instance, in extensions.conf I have : exten => 1234567,1,rxfax(/home/patryk/fax-new.tif|debug) exten => s,1,Dial(1234567) exten => s,2,txfax(/home/patryk/fax.tif|caller|debug) but I doesn't seem to work.But when I'm calling on this number I can hear fax tones. I can't find sip

I have spandsp, rxfax and asterisk-1.4.2 installed and whenever a fax call comes in we get this. This isn't good. Any ideas? [New Thread -1215390800 (LWP 8504)] -- Accepting call from 'DELETED' to '539' on channel 0/1, span 1 -- Executing [539@telco-incoming:1] Set("Zap/1-1", "DIALEDNUM=539") in new stack -- Executing [539@telco-incoming:2]

Hey, all. Just wondering if there's a GUI out there -- preferably OSS, but I'll take what-have-you -- that a) can run on an Ubuntu/Debian box, and b) allows a receptionist to see what calls are in-process, and forward calls from their phone to somewhere else. Thanks! -Ken -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

Hey, all. I'm planning on migrating a W2K3 server to a Linux solution. It needs to be AD-aware, support ACLs, etc. This isn't something I'm doing Right Now(tm), so I can wait a little bit. A couple questions: 1) Are there any known issues with BTRFS? 2) Which version of Samba would be most appropriate for this? 3) AD integration: I've never really done it (with success); any