similar to: WCTDM-24xxp woes

Apologies if any of these have already been fixed in the working version Page 6 third and fourth lines from the bottom "Digium is the solely capable" should read "Digium is solely capable" -- Andrew D Kirch | Abusive Hosts Blocking List | www.ahbl.org Security Admin | Summit Open Source Development Group | www.sosdg.org Key At

[root@asterisk zaptel]# modprobe ztdummy WARNING: Error inserting zaptel (/lib/modules/2.6.5-1.315/misc/zaptel.ko): Invalid module format WARNING: Error inserting zaptel (/lib/modules/2.6.5-1.315/misc/zaptel.ko): Invalid module format FATAL: Error inserting ztdummy (/lib/modules/2.6.5-1.315/misc/ztdummy.ko): Invalid module format FATAL: Error running install command for ztdummy [root@asterisk

Hi, everyone: I am developing a system using Asterisk, TDM-400 analog cards, analog lines, and Polycom SIP phones for internal extensions. Initially there was bad echo but after a series of efforts, I've managed to reduce it to a negligible level (it only happens when both parties speak simultaneously, and even there, only for a few hundred milliseconds). From an echo standpoint, things are

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

Andrew D Kirch Indianapolis, United States Good day, I am Mr. Andrew D Kirch, a native of Indianpolis, United States and I am an Asterisk Hacker with the Summit Open Source Development Group. First and foremost,I apologized using this medium to reach you for a transaction/business of this magnitude, but this is due to Confidentiality and prompt access reposed on this medium. Be informed

Chuck, Thank You I'm also going to try CentOS 3 The problem is I have SATA HDD and running in to trouble getting Linux installed. Will update after I test Ver 3 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chuck Bunn Sent: Monday, March 13, 2006 12:45 PM To: Asterisk Users Mailing List -

FYI: I am trying to build zaptel-1.2.4 against the recently updated kernel version 2.6.9-34.EL on Centos 4.2. but I am getting errors and it will not build. This is apparently due to a typo in a kernel header spinlock.h although I have not successfully modified the kernel and built zaptel against it yet. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=180568 This bug report has a typo

Hi, I'm still strugling with getting an easy to use conference system implemented. I did have app_conference running, but today I upgraded asterisk to 1.0.9 and it stopped working. I've tried following the instructions for compiling app_conference on 1.0.7 but it didn't work. So I went back to ztdummy (I've not had any luck getting this to compile on FC2). Anyhoo, I've

I'm a neewbie in Linux, so please bear with me. I have a school assignment to make communication between 10 SIP softphones (kphone). So far I got trouble installing Asterisk. The information in asterisk web site seems to be a bit outdated because it's mentioned only kernel 2.4. Since Mandrake cooker (10.2beta3) witch I'm using is using kernel 2.6.10, I wander if I have a chance to

I came into this with my eyes wide open. I have read ABSOLUTELY EVERYTHING there is to be found on the net about avoiding echo problems BEFORE I even attempted to create a production system. Since lots of people are apparently using this in production environments now I just assumed that echo IS avoidable. As others have recommended, I created a test system with the proposed production

Hello! I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 -- all give the same error) with 2.6.19 kernel CC [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o In file included from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26, from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28:

Hi, I am having some issues with a new server install in Singapore. Outbound calls work fine. Inbound calls are not picked up by Asterisk. Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. libpri installed wctdm and zaptel load without error Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface Registered on major 196 Jun 6 23:34:03 fs01 kernel: [211138.372937]

This is a follow/find me script that I can't quite get to work, asterisk wont save forward/${calleridnum} to AstDB... any comments or thoughts on how to make this work or change it to work differently are appreciated. The voice prompts to go with all playback/background extensions are commented appropriately. I hope this code is of use to some of you and any help with a perfected

Thank you for the suggestions Andrew. I have not come across some of them before and will give them a shot. Based on my reading, changing the motherboard should have minimal impact unless that motherboard and the TDM400P don't get along (aka. IRQ sharing). I have disabled everything that is not needed and I do not believe I have any IRQ problems and I am NEVER wrong ;). Calls are crisp and

Hi, If I''m using STI with Devise, I have a Admin model inheriting the base Devise User model. I would like to remove ''registerable'' from the Admin model but it inherits registerable from the user model. How would i disable registration for admins? -- You received this message because you are subscribed to the Google Groups "Ruby on Rails: Talk" group. To

This may be commonly known but I haven't come across it so here goes, maybe it'll help someone: I have terrible echo with asterisk 1.2, zaptel 1.2.12, and a TDM400P with 1 FXS and two FXO modules. The Mark2 echo canceller with Aggressive turned on was the only setting that would make it acceptable. I found fxotune with this zaptel version to be broken. I pulled the latest fxotune.c

I'm trying to learn to use fxotune and am getting the error: Could not fill input buffer - got -1 bytes, expected 4000 bytes Failure! when I run it. This is a new install of Asterisk 1.4 and zaptel 1.4. Also I can't really find an up to date how to on it. Am I supposed to place fxotune on my startup path and run fxotune -s once it is working correctly. Any nuggets of info are most

dude it's gotta be something with your system. Im using same setup at home with a TDM22 with no probs. Asterisk@Home 1.5, Compaq Deskpro EN P3 500, cordless phones. You did a ton more than I did, I basically plugged everything in and installed a@h.Worked first try. Hate to say it, but would it be possible to try a different system? Even an old system as long as it is PCI 2.2. The big clue

I figured I'd answer my own thread and document what it took to get rid of the echo at my location. For those of you trying to get rid of echo, let me tell you, "what worked for that guy, probably won't work for you". I think we've all heard that before, and it's true. Let me assure you that echo can be removed from your phone lines. At 20 hours into my 40

I noticed the following came into cvs head yesterday: > Update of /usr/cvsroot/zaptel > In directory mongoose.digium.com:/tmp/cvs-serv2118 > > Modified Files: > fxotune.c wctdm.c wctdm.h > Log Message: > More TDM card echo API modifications. Making the fxotune program automatically > find the correct coefficients for the module. Lots of neat stuff. I did a complete