similar to: Zap channels ringing too loudly

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

Hi, Xorcom astribanks get initialized straight on when using Ubuntu 11.10 packages but I am having a hard time to get the same result running in a qemu/libvirt image. The first difficulty is that astribanks devices get different usb device ids during their initialisation process, requiring hot plug support. I have figured out how to solve this issue using the technique described in this post :

Hi, I am looking to connect 66 analog phones to an asterisk box. I was thinking of a Xorcom astribank 32port (2 of them and another 8 port). this is because the phones have no near connection to an ip network, so replacing the phones in favor of voip phones+network cabling is kinda out of the question. In your experience, will these units support all the phones talking at the same time with

I have spent some time this morning trying to add an Astribank to our current Asterisk, but it failed, so I just removed the hardware, restore the config files to the original setup and started asterisk.; I could see that no Zap channels are started so I did load chan_zap.so: pbx*CLI> module load chan_zap.so [Feb 26 10:32:18] WARNING[3809]: pbx.c:2968 ast_register_application: Already have an

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

What is dahdi.auto_assign_spans and why should you care? In later versions the kernel module dahdi[Q] includes a new parameter: auto_assign_spans. It defaults to 1, and if you set it to 0, DAHDI can start behaving in strange and completely expected ways. Chances are the default will be set to 1 in a future version. Here is why you'll want to set it yourself. Up until DAHDI 2.5, hardware

CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/vpmadt032.o CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/GpakApi.o CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/../voicebus.o LD [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/wcte12xp.o

Hi, I have been looking at Asterisk SCF http://www.asterisk.org/asterisk/scf, but its not yet production ready. Can someone please pitch in about HA feature in Asterisk ? (HA -> High Availability.) Also, What would be the pros and cons of using AsteriskNow over Asterisk ? Are the versions same in Asterisk and AsteriskNow ? We have been evaluating Asterisk for our Voice Application and it seems

I have an X100p card....and it is hard to hear the person on the other end. Should I mess with these values? I have heard both yes and no to this question in the past. If yes, how much louder should I make them? Thanks, MIchael

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

Hello, I just made a asterisk / dahdi fresh install on Debian 8.4, and ended up with the following packages : $ sudo dpkg -l|grep -Ei 'dahdi|asterisk|libpri' ii asterisk 1:11.13.1~dfsg-2+b1 amd64 Open Source Private Branch Exchange (PBX) ii asterisk-config 1:11.13.1~dfsg-2 all Configuration

Hi, all My Asterisk uses a Digium TE120Pand I would like to add an Astribank zaptel_hardware sees is, but I cannot get it working pbx:~# zaptel_hardware Argument "IRQ" isn't numeric in numeric comparison (<=>) at /usr/local/share/perl/5.8.8/Zaptel/Span.pm line 114. usb:005/002 xpp_usb- e4e4:1131 Astribank-8/16 USB-firmware pci:0000:04:00.0 wcte12xp+

openssh password expiration problemPatrick, Indeed password aging does not work with OpenSSH 3.0.1p1 on Solaris 2.6. >From what I can tell something is different with Solaris 2.6 and Solaris 2.8. I know that password expiration doesn't cause a problem on Solaris8. I'm unclear as to whether the problem is with OpenSSH code or Solaris. All I know is that the latest PAM patches are not

Is there a way to run sshd on a windows 2000 server and have ssh clients authenticate to it using domain level authentication? Mike

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00:

I have recently updated from Centos/*1.2 to Ubuntu Server and FreePBX 2.8.0.2. We have an Astribank with 4 T1 ports and 16 FXS ports. After updating, we had it working for a while with one NT PRI and one TE PRI and, in the process of trying to configure another PRI, I ran into a couple problems. (1) As my configuration changes didn't seem to affect the Astribank, I power-cycled it. I

Any know what Digium hasn't released the DS3 card? It was supposed to be out a while ago. -Matt

I am having a problem with and Asterisk installation where two ports connected to a TDM400 card will have a very loud noise when you try to dial. The server has an OpenVox D110P, a TDM04B and a Xorcom Astribank 8 fxs. It is running Zaptel 1.4.11 and Asterisk 1.4.18. The problem always happens with two ports (34 and 35) which are connected to two GSM gateways. They will work fine for a week

Hello, I'm in the process of building an Asterisk machine and need 5 or 6 BRI-Channels. I was looking for the beroNet and Junghans cards and stumbled upon the Xorcom Astribank xBRI products. Has anybody tried out the Astribank xBRI-Channel Banks? Are they production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET octoBRI ISDN? Thanks in advance, Lars -- We don't like their

Hi, I'm running SuSE 9.3 fully updated using YOU and I *have* re-booted the box (in a hope to sort out the uname -r issue mentioned below). I'm using the Asterisk Doc Proj vol 1 to guide me through the initial setup. I have no special HW and intend to use asterisk on an internal network just to get some experience. I have downloaded what I think I need and placed it in /usr/src (see