similar to: Asterisk receiving call from Panasonic TDA extension issue

We have a setup running Asterisk interconnected to a Panasonic TDA200. The Asterisk server has a two port E1 card, one connected to the phone company and the other to the Panasonic. Everything is running fine and we can send and receive calls from the Panasonic and phone company. We are using MFC/R2 for both links on Asterisk 1.4.4 and Zaptel 1.4.3. The only detail we have is that we cannot

Hi, I hope someone can help me with this.... Asterisk 1.0.6 Zaptel 1.0.6 Libpri 1.0.6, 1 Digium E100P card installed Panasonic TDA200 firmware v2.0.6 E1 Card Firmware 1.0.2 System is located in Australia, so as technologies go, I believe it is twist on the euro standard for the E1 signalling. Here is the situation. The TDA E1 card is set in cross over mode and I am using a functional

Hi I have a Panasonic TDA600 conected with one E1 to the pstn and one PRI with my Asterisk using a Digium TE220B card. The Panasonic is master clock and Asterisk is slave, additionally the Panasonic takes the clock from the PSTN E1. This scheme works and I?m able to make and receive calls the problem is that some times the Asterisk lose the synchronism with the Panasonic and the log shows this

I have a few questions. Asterisk is a windows program why each time I try to find out how communicate with my Panasonic TDA 100 or with TDE 100 always read "use one card o use a box" why I can't use simply my network card, in the other side of Panasonic exist two types of cards one in TDA 100 with 2 trunks and in the other side TDE have internal Two trunks too. Why if I want to

I have a client who has a Panasonic Hybrid system. They are taking in another company as a building tenant and the tenant will be on a new 12 station Asterisk system. This new asterisk system will have 4 FXO ports plus ITSP. The two systems will be separate except that they should tie together for the purposes of dialing extensions directly on the opposite phone system and for transferring

Panasonic PBX KX-TDA600 it doesn't support SIP protocol for VoIP technology it only support H323 Trunk through 4 or 16 channels gateway card and TDM technology with ISDN BRI and PRI card. Mc GRATH Ricardo

Anyone have any luck with connecting Asterisk to the Panasonic KX-TD500. I have Asterisk connected via crossover to the TE110P. We are able to make internal calls into the Asterisk Box but the PBX vendor (I know nothing about the KX-TD500) tells us it is not possible route DID over the trunk. I find this hard to believe. Anyone have any luck with this? Thanks! -------------- next part

I did a NoOp and see what the callerid was and when coming from the SIP Ext->Voip it is set to the Extension Number of the SIP Extension (as you would expect). When coming from the Panasonic the CallerID is blank, I tried setting it to nothing again, and I tried setting it to the callerid of the voip provider, a sip extension id, the extension number on the Panasonic side, the zap channel

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Ext No Problems Panasonic Ext -> SIP Ext No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1] Dial("SIP/610-097aee60",

Hi Guys, I'm looking for a light on the next problem integrating an Asterisk server with a Panasonic PBX using a PRI. The follow config has been working for two weeks and works almost fine, except for some little problems... 1- PSTN provides the E1/PRI (EuroISDN) 2- Asterisk receives the PRI 3- Asterisk provides a second PRI to Panasonic 4- Panasonic receives the asterisk PRI People can

hello, i have some questions, tryin load KX-TDA100 console(ATS programming) but have window: "This model of PBX not supperted ...etc" and in xterm : fixme:exec:SHELL_execute flags ignored: 0x00000004 fixme:imm:ImmReleaseContext (0x10020, 0x1270b8): stub tryin XP/2000/ emulation not working :( what i must do to load this? thanks

Hi, all ! I have a situation like this: [SIP Terminals] <-> [*] < -ISDN-PRI-> [Panasonic D500] <-> Telecom (conn to Telecom is with second PRI card in Panasonic and 16 POTS lines). Panasonic has 2 ISDN PRI cards (one to Telco, and second to Asterisk), 16 POTS lines to telco and 32 (advanced hybrid telephone type) extensions. Idea is to have possibility to have some users on

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Extensions No Problems Panasonic Ext -> SIP Extensions No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1]

The Panasonic KX-TA624 series PBXes (and similar models) support a DTMF integration feature that can be enabled for dedicated voice mail ports. What I want to do is connect an X100P FXO port to a jack on the Panasonic and make use of the Panasonic's DTMF call progress tones that it provides in DTMF integration mode. The integration works well when a Panasonic extension is forwarding into

Hi all, I have an existing panasonic analog pbx in use and a asterisk server with digium tdm400p(2 fxs and 2 fxo). channel 1 -> fxs -> telephone channel 2 -> fxs -> telephone channel 3 -> fxo -> extension 15 at panasonic pbx channel 4 -> fxo -> phone line from telco We call in to fxo (channel 4) and enter the ivr which prompt us to enter the extension number. After

Dear Pals One customer has a Panasonic PBX KX-T336 with 60 ext. and a E1 (R2) for Trunks working perfectly now, This customer has 10 wireless links to his branches, wireless working great now, no voice at the present MY IDEA : T1Card into the Panasonic (additional to the E1) connected to a T1 Digium Card into Asterisk as far as I know the T1 Card can be configured as E&M to act as

Hi list! I have a little question about groups and Asterisk ... is there anyone out there that can say if Asterisk can do any of this; We have a customer that want call handling we cant give him with a traditional PBX, and I'm running Asterisk @home so I thought I could give it a try ... The customer wants that incoming call should go to one group with some phones in it, if the group is

Last week I asked about MWI indicators on wireless phones that would work with Asterisk. I sent a message off to Panasonic asking them about it because in their ads they specifically stated that the indicator works with and requires phone company voicemail subscription. The is the model TG5631. Specs here... http://www.amazon.com/Panasonic-KX-TG5631S-GigaRange-Cordless-Answering/dp/B000F4C2CA

Thank you for response. So a "standard" quad bri card can serve the KX-TD1232, no need for anyt special fxs similar equipment. Would like not to invest much more money into the Panasonic, I wan't it out :P BR Amund -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Peter Svensson Sendt: 14. juni

Hello! I have following connections over isdn pri: avaya definity---pri--asterisk--pri-panasonic 500 Just because panasonic 500 can't send user's names. I also want to have reverse callerid for avaya users. But if there is no answer in dial plan: exten => _XXXX,1,Set(CONNECTEDLINE(name)=${DB(names/${EXTEN})}) ;exten => _XXXX,n,Answer exten => _XXXX,n,Dial(DAHDI/g4/${EXTEN})