similar to: Misdn 0.2.1 BUSY tone

I am trying to use misdn insted of zaphfc to drive two billion isdn cards zaphfc is ok, but the problem with cdr and the fact tha you always have to wait the bristuffed version of asterisk took me to try another way. so I downloaded the misdn installation script from beronet for the last version ( I am using asterisk stable 1.2, so now is 1.2.5) wget

I have a preoblem with my snom 320 phones. I have 5 snom phones installed and all of them have 5.2 firmware. All have same settings in the advanced panel. On 2 phones when I press the hold or transfer key nothing happens and * does not start the musiconhold. In the The hold and transfer keys are set as F_R and F_TRANSFER correctly as the others. Other snoms and gxp-2000 work ok. Any ideas?

Hi, Until now I've been using my Digium B410P cards with misdn 1.0.x. I would like to upgrade my systems and am now wondering which is the "best" route to take: - use the latest release of misdn v1 - upgrade to the latest "stable" kernel and use the built-in misdn v2 - use misdn v2 as a seperate package (disable misdn in the kernel) - use dahdi's support for misdn

Hi, I'm bumping on this : cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_18 make <snip> In file included from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/core.h:9, from /usr/src/mISDN-1_1_8/drivers/isdn/hardware/mISDN/avm_fritz.c:20: /usr/src/mISDN-1_1_8/include/linux/mISDNif.h:791: error: field

Hi, Before diving into this, I would very pleased to know if someone could yes or no, successfully compile mISDN 1.1.8 on Lenny (latest RC1 or beta2 version) ? Regards After a fresh install on Lenny, I can reproduce at will : apt-get install build-essential linux-headers-2.6.26-1-686 cd /usr/src wget http://www.misdn.org/downloads/mISDN.tar.gz tar xvf mISDN.tar.gz cd mISDN-1_1_8 make ....

Hi All, We've got msidn configured: Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060) iend(0x8fd5060) and running on Asterisk 1.4.21.2: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0

Hello everybody. I am trying to configure an Asterisk on Debian with the Billion ISDN card. I am using mISDN. But when I call on the CLI apears this: -- Executing Dial("SIP/101-081805b8", "mISDN/1/943833473|45|tTwW") in new stack -- Called 1/943833473 P[ 1] empty_chan_in_stack: cannot empty channel 255 P[ 1] --> we have already send Release_complete == Everyone is

Hi, I have FRITZ!Card PCI card. I have installed misdn-1.1.0 on stable debian 3.1 with 2.6.8. kernel. Then I reboot system, and it doesn't boot, it stops near "Apache2 starting...". I started my system with "recovery" kernel, and tun off misd, then my system works fine. I think it's problem with memory. Has anybody debian and misdn working fine? Maybe you can

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf:

I had Asterisk 1.6.2.2 running fine with a mISDN using a HFC-S based card. I installed my TDM400P into the PC, it's really slow to boot now, when it finally does I gets stuck in a loop of reporting "isac xdu no tx_busy". Anyone able to assist? Thanks in advance! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, I have some problems with mISDN. I can't send or receive call from the Billion ISDN card Mi configuration files are thoose: extensions.conf: [general] static=yes writeprotect=yes [SOME] exten => 101,1,Dial(SIP/101,30,Ttm) exten => 101,2,Hangup exten => 102,1,Dial(SIP/102,30,Ttm) exten => 102,2,Hangup include => outgoing [outgoing] exten

Hi. Using Asterisk 1.4.13 running on Ubuntu 7.04 with Intel CPU: 1) Not being able to build mISDN on Ubuntu using "make b410p" I have used mISDN-1_1_7 which seems to work ok. QUESTION: Should I expect this version of mISDN to work ok with these cards? Or is there a way to build using "make b410P" on Ubuntu? (make force does not help at all) 2) In some of our installations

Hi, I try to compile mISDN 1_1_9_2 (kernel: 2.6.32.13). I had the following compiling error: make[1]: Entering directory `/usr/src/linux-2.6.32.13' CC [M] /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.o /usr/src/mISDN-1_1_9_2/drivers/isdn/hardware/mISDN/sysfs_obj.c: In function ?mISDN_register_sysfs_obj?:

Hi. I'm having problems with chan_mISDN configuration. Line "echotraining=yes" causes warning, when Asterisk is parsing misdn.conf and I'm confused why the PBX doesn't accept the setting. No matter which section I try to offer it, it is always invalid or out of range. The setting itself is supposed to be valid, it is in the sample configuration file of chan_mISDN 0.3.1.

Hello, I'm evaluating to possibility to use chan_misdn as a short term workaround, in case latest Dahdi is not stable enough for what we are planning to do (we wish to use Junghanns and Digium BRI hardware with Asterisk 1.6) . I've read www.mISDN.org but still have a couple of questions : 1. Is correct that in a 2.6.27 (and up) enabled kernel, the "embedded" mISDN version is

Hi all, i downloaded and installed mISDN with 2.6.8 kernel, but when i try mISDN-init scan (or config) i get this error: [!!] FATAL: bc not in path, please install. Anyone can help me. Tnx Giordano -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.432 / Virus Database: 268.17.0/639 - Release Date: 18/01/2007 18.47 -------------- next part

Hi all, I just arrived in Italy from Cebit, qhere I spoke with digium and Beronet people. They told me to try to use the mISDN stack to drive beronet and the new upcoming digium ISDN Cards. SO I searched, find http://www.beronet.com/download/card_installation_guide.pdf, and I immediately got the error: asterisk01:~ # cd /usr/src/install-misdn/ asterisk01:/usr/src/install-misdn # make install

I have set up a * box with two hfc ISDN pci cards using mISDN both in TE mode with PmP mode. (using $MODPROBE hfcpci protocol=0x2,0x2 layermask=0xf,0xf) I have no problem dialing out by explicitly naming the mISDN port, ex: Dial(mISND/1/${EXTEN},60) or Dial(mISDN/2/${EXTEN},60) But it does NOT work when specifying the mISDN group: exten => _(outpattern),1,Dial(mISDN/g:TEmode/${EXTEN},60)

Hi, i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module is loaded with option: type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf and the fourth port is connected to an ISDN PTMP (MSN) port. Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ? Can anyone give me a hint ?? misdn debug messages follows: lib: NEW_CR Ind with l3id:80001

Hi list, I've installed Asterisk 1.4.0 with newest mISDN 1.0.4 + mISDNuser 1.0.3 on Fedora Core 6. I get many compilation error on mISDN. It wants to include linux/config.h That I fixed by removing the #include line at every occurance. (Don't know if that was a wise move, but it then compiled). mISDNuser and asterisk compiled fine, and asterisk can find and use the ISDN BRI port in