similar to: AW: Free/Open pci telco card

Hi, I've just come upon an interesting question regarding the use of Asterisk as an "Application Server" connected behind a conventional ISDN PBX: The user wants to forward all incoming calls through the PBX to Asterisk over S0-Lines, have Asterisk do some processing (which includes looking up the final internal extension for the incoming call) and then returning the call to the PBX

I have an old zapata tormenta 2 quad port pci card. I'd like to get it working and play with it but was curious to see if that was possible. Does anyone know if it will work for 2.6 kernels, or where I can find decent drivers? I tried getting the tor driver from http://www.zapatatelephony.org/linux-zapata-current/ installed, but didn't get very far. Any input is appreciated.

Hi ! Starting the smbd, I get the following output in samba.log and i cannot connect to samba (from Win95): [1999/10/05 09:47:27, 2] interface.c:(213) Added interface ip=129.103.47.94 bcast=129.103.47.255 nmask=255.255.255.0 [1999/10/05 09:47:27, 1] files.c:(216) file_init: Information only: requested 10000 open files, 1014 are available. [1999/10/05 09:47:27, 2] server.c:(716) Changed

Hello,every one! I want to fabric a piece of Tormenta ISA E1 card for study. But the from http://www.zapatatelephony.org is all about Tormenta ISA T1 card. I want to know if they are using the same chips or something different bettween them. Thanks. john

Whatever happened to the Zapatatelephony project? The last information there is from 2001 and a lot of new cards have been released since. Has GNU hardware development completely stopped?

Hi List, While I was surfing the net last week, I found a link for "open source" pci telco cards. I'm not sure if it were isdn or analog related. The layout an all the stuff was free downloadable, so that you can build your own cards. Does anybody have the link? Yes, I know there is google, but i searched for over an hour, but can't find anything. maybe i use the wrong

?Hola! torisa.c (from zaptel 0.50) says: #define MASTERVAL 0x41 /* Enable E1 master clock on Rev. B board */ Does that mean that there is a torisa revB? If so, are the schematics downloadable from somewhere? (www.zapatatelephony.org only has Rev. A ones) Does the Rev. A support E1? (just changing the DS2151 for DS2153, the DS crystal and closing the E1 jumpers, or something else is

Hi, we use OpenSSH_3.8.1p1 and we would like to change the complete printer Spool communication from Unix r-Commands to ssh "OpenSSH". Sometimes, we have problems, because of very high connection set-ups in extremely short time intervals, more than 10 open sessions. The connection set-up is partly declined with the error message: ssh_exchange_identification: Connection closed by remote

Hello, I just searched the wiki for info about NSPluginWrapper. It's a plugin for Firefox which creates a kind of bridge between i386-plugins and a x86_64 browser. That aside... Well, looking for the string "NSPluginWrapper" and doing a text-search, the only hit is the Japanese version of the Release Notes!? I don't understand any of the text, but I interpret that the

Greetings, I have a quad port Tormenta 2 PCI card (uses the tor2 driver), which I have been successfully using for some time on an older, power-hungry Intel machine. I recently moved it to a newer machine with an Intel Atom D510 CPU in an effort to save on energy costs, but I cannot seem to get it to work there. Both machines are running Ubuntu 13.10 x64, with DAHDI support coming from the

Good day everyone, A Solution now exists for those of you still looking for the first model of Quad T1/E1 Interface Cards - the T400P and E400P. The T400P and E400P were manufactured by Digium until a few months ago, and were designed and released under the GNU Public License as the Tormenta II by Zapata Telephony. Varion, Inc. is now in full production manufacturing these boards. With the

Hi there, my * has no Zaptel or Tormenta hardware at all, also no ztdummy. However dmesg is full of Zapata Telephony Interface Registered on major 196 No ISA tormenta card found at d0000 Zapata Telephony Interface Unloaded and /var/log/messages shows tons of this: Nov 25 21:28:28 localhost kernel: Zapata Telephony Interface Registered on major 196 Nov 25 21:28:28 localhost kernel: No ISA

Hi all.. I`m with a problem in some E1 cards. The value of Bipolar Viol is too big, and some times the link seems well, but isn`t work correctly, like as if the link is down. Normally, I use to stop asterisk, remove the modules from my card, use modprove to set up they again, and start asterisk, and it come to work, but in some times I have to reboot the server, and then the value of

Hi Rob, on your Info for Version 3.0.25 you pointed out the VFS-Module GPFS for using features of the underlaying GPFS-Filesystem. Also the man-pages-3/vfs_gpfs.8.html points to that module, but I can't find it anywhere. We are using a GPFS 3.2 3-Node Samba Cluster (3.0.24/28) on Dell HW. We would be very glad if it is posible to get - Quota Recognition for our users (we use "max

Hi Rob, on your Info for Version 3.0.25 you pointed out the VFS-Module GPFS for using features of the underlaying GPFS-Filesystem. Also the man-pages-3/vfs_gpfs.8.html points to that module, but I can't find it anywhere. We are using a GPFS 3.2 3-Node Samba Cluster (3.0.24/28) on Dell HW. We would be very glad if it is posible to get - Quota Recognition for our users (we use "max

Support setting the FDB limit through ip link. The arguments is: - fdb_max_learned_entries: A 32-bit unsigned integer specifying the maximum number of learned FDB entries, with 0 disabling the limit. Also support reading back the current number of learned FDB entries in the bridge by this count. The returned value's name is: -

On 15/05/2023 11:50, Johannes Nixdorf wrote: > This is a convenience setting, which allows the administrator to limit > the default limit of FDB entries for all created bridges, instead of > having to set it for each created bridge using the netlink property. > > The setting is network namespace local, and defaults to 0, which means > unlimited, for backwards compatibility

Hi everybody, I need to know about sound quailty issues from those who have experience with Tormenta2 PRI Interface. Also how to make it work with new versions of Asterisk and Zaptel. And also suggestion if it is a good idea to switch to some newer card from Sangoma or Digium, or Tormenta should work fine. I have sound breaking many times a day over the trunks. Server is AMD Athlon 2.4 GHz with

Support setting the FDB limit through ip link. The arguments is: - fdb_max_learned: A 32-bit unsigned integer specifying the maximum number of learned FDB entries, with 0 disabling the limit. Also support reading back the current number of learned FDB entries in the bridge by this count. The returned value's name is: - fdb_n_learned: A 32-bit unsigned

Any one know of software that allows 2-way radios as VoIP(SIP) clients, besides dingotel's usb & mic cable trick ? http://www.dingotel.com/2way/requirements2way.asp They might be ok if the SIP client was not hardcode to their own SIP proxy Has anyone tried any hacks to get the 2-way radio SIP client to regsiter to a * box. hmm chan_frsgmfrs anyone? using the usb/mic cable under linux :)