similar to: Initial second lost on SIP phones

I am dying here with linphone (not sure if it is crap software or just me being an idiot) but out of the box debian installations of two linphones fail with a "Got SIP response 415 "Unsupported Media Type" back from 192.168.1.3" Can anybody recommend a particular SIP soft phone that broadly satisfies the following criteria? 1. Run on linux. 2. Simple to use and setup. 3. Is

Hello, I have configured my TDM01B Card (1 FXO Port ) as follows (below) but it will not pick up an incoming call. Any suggestions/tools to see what the problem is? I have looked at zttool where this line changes but I don't understand what it means (The last digit changed from 0 to 1) Total/Conf/Act: 4/ 1/ 1 /etc/zaptel.conf fxsks=4 loadzone=nl defaultzone=nl

Can anybody recommend a reseller in Europe (Netherlands) for modules for the X100P (FXO and FXS modules)? Cost, support are important. Also, what is a reasonable price for an X100P in Europe? Is there a difference in price between OEM and Boxed versions? Thanks, Pieter

Hi, I'm just starting out with Asterisk, in combination with a TDM400, filled with 2 FXS on channels 1 and 2, and 1 FXO on 4. Having just started, all I want right now is to be able to answer incoming calls on a phone connected to channel 1. The trouble is the caller id. I have caller id enabled on my line, my phone supports it, and when I connect the phone directly to the line, it works.

I am trying to understand what rbinom function does. Here is some sample code. Are both the invocations of bfunc effectively doing the same or I am missing the point? Thanks, Pieter bfunc <- function(n1,p1,sims) { c<-rbinom(sims,n1,p1) c } a=c() b=c() p1=.5 for (i in 1:10000){ a[i]=bfunc(30,p1,1) } b=bfunc(30,p1,10000)

I went to put in the new sound files over the weekend, but forgot to backup the custom folder and lost my custom digital receptionist files. I then had to copy the old files back from a duplicate machine. The problem is now though that voicemail just hangs up when I dial it. Other apps work - *70 for example gives me 'call waiting...activated' so I know it's accessing the files

I'm trying to do a linear discriminant analysis on a dataset of three classes ("Affinities"), using the MASS library: > data.frame2 <- na.omit(data.frame1) > > data.ld = lda(AFFINITY ~ ., data.frame2, prior = c(1,1,1)/3) Error in var(x - group.means[g, ]) : missing observations in cov/cor What does this error message mean and how can I get rid of it? Thanks! Pieter

Compile out splice support from virtio character driver when the splice-family of syscalls is not supported by the system (i.e. CONFIG_SYSCALL_SPLICE is undefined). Signed-off-by: Pieter Smith <pieter at boesman.nl> --- drivers/char/virtio_console.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index

Compile out splice support from virtio character driver when the splice-family of syscalls is not supported by the system (i.e. CONFIG_SYSCALL_SPLICE is undefined). Signed-off-by: Pieter Smith <pieter at boesman.nl> --- drivers/char/virtio_console.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index

Hi list, I have tried with all my might to get a samba3 server (Ubuntu 12.04.1 LTS) to join a Windows 2003 domain as a member server, without any luck. I have used,from memory, the official way of doing this (aka, from the samba.org website). No matter what settings I use in smb.conf, the server always joins as a domain controller. This doesn't seem to break the domain how ever. All I am

I am trying to get a program running under wine that needs to connect to a flexlm license server. Unfortunately I get denied when authentication because the license is a 'windows' license and I am running the program from a linux platform. Is there a way to make wine authenticate as windows? I am using the 'windows version' of the program, so I am assuming that there is

I am using asterisk with a handful of DM04B cards. Everything seems fine except for an echo on all calls on the local end of the call. In almost all cases the echo goes away after 15 to 20 seconds. I am attributing the echo going away to the echo cancellation code that was enabled when the following options are set: echocancel=yes ; echocancelwhenbridged=yes echotraining=yes ; Is there anyway

Hi I have a wysiwyg html ditor in my app. How do I escape html written to the database and encoding when I display the content> Ty Pieter -------------- next part -------------- An HTML attachment was scrubbed... URL: http://wrath.rubyonrails.org/pipermail/rails/attachments/20060815/d8c50941/attachment.html

Dear Shorewall list, I need to connect a firewall to various remote sites (VPN''s) at the same time, but i do not have control of any of the remote subnets and/or the given IP address: The firewall is just a client in all of the VPN''s. So, as i see it, the remote subnets (mostly rfc1918) are doomed to get into conflict when they happen to be connected at the same time. For

Hi all. I have the following scenario. http://myapp/site1 is using <%= stylesheet_link_tag ''myapp_standard'' %> to define the stylesheet for layout, I have myapp_standard.css in /public/stylesheets and it works fine. However, in the stylesheet I define a image to use for my site background. eg: html, body{ background-image: url(mysite_background.jpg); padding-top:

Hi all, I want to set the advertised value of MTU for virbr0 interface on a Fedora 21 host to 1454 to accommodate the installation of new VMs for testing purposes. The aforementioned host is an OpenStack VM actually, which explains the need for a lower than 1500 MTU. I noticed Pieter Hollants' patch to set dhcp-option=<number>,"<value>" for an interface, but

I get the following error when trying to mount: Nothing changed (in any case not that I know of). I get the same error from both nodes. Please assist. # mount /u02 mount.ocfs2: Invalid argument while mounting /dev/sdd1 on /u02. Check 'dmesg' for more information on this error. /etc/fstab: /dev/sdd1 /u02 ocfs2 _netdev,datavolume,nointr 0 0

Hello Tobi, Thank you for the quick reply. I updated my complete build suite with your script (http://polly.grosser.es/polly.sh). The make-test fails with some errors, the rest went smoothly; -- Exit Code: 1 Command Output (stderr): -- LLVM ERROR: Could not resolve external global address: stdout -- ******************** Testing Time: 10.01s ******************** Failing Tests (3): Polly ::

The following patch corrects a portablility issue when compiling openssh 6.0p1 on MirOS (aka. mirbsd). The issue is: sftp-server.c: In function `send_statvfs': sftp-server.c:510: error: request for member `val' in something not a structure or union sftp-server.c:510: error: request for member `val' in something not a structure or union The patch is: --- configure.ac.orig 2012-04-19

Hello Everyone, Would it be posiable to add a "keep alive" option to rsync. The problem I am having is that the connection is dropped while rsync is scanning the local directory. If "null" packets are send to the server every 60 seconds or so, the connection will stay up and the sync will work. Or maybe there is an option that does this already ? Thanks, Pieter De Wit