similar to: Multiple Registers

Greetings, What is the recommended settings for using SPA-3000's FXO port for dialing out to PSTN in regard of the DTMF? The voip lan contains SPA-2100 and SPA-3000, with all fxs/fxo ports registered to the Asterisk box with unique username/passwords. The inbound PSTN DTMF works excellently, e.g. people calling from PSTN into the * box are able to pick IVR items with DTMF reliably. The

I'm trying to clean up some notices/warnings that are repeatedly logged in *.Any Help would be appreciated as I'm not sure of the cause /solution. Here are the errors: Nov 17 15:53:38 WARNING[1217602880]: File chan_zap.c, Line 1321 (zt_call): cidspill already exists?? +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ /* Don't send audio while on hook, until the call

Can someone help me with upgrading to the lastest version. I am using the same sip.conf file, but the headers have changed and registration fails. Has something change in the conf file that would cause this? Notice 1.2.5 has no Authoization at all... Regards, Jason Version 1.0.9 --------------------------- REGISTER sip:voip-ca35323.ocn.ne.jp SIP/2.0 Via: SIP/2.0/UDP

hi .. when placing a SIP call to a sip host in the states every few seconds I get an RTP codec 19 error. I know this is related to comfort noise, and the call goes through OK ... how can I suppress the error message ? Also, many times I get "Invalid CSeq Number" back from 216.52.153.207 (which is the host i'm calling) and the call drops.. is there a solution for this ? cheers Dave

Hello I have installed cepstral .... It works woderfull using an agi script but ..... when i try to use Swift("say this") is Dial plan .... I get the error [Aug 26 12:30:18] WARNING[7420]: pbx.c:3167 pbx_extension_helper: No application 'Swift' for extension (actdemo, 123, 2) Now i come to know to install app_swift Here is the issue... when i try to execute make command

Hi, is there a way to enable dtmf detection on zap channels? I am trying to pickup, play a ringtone and the dial out. I.e. exten => s,1,Wait,1 exten => s,1,Answer exten => s,2,Playtones(dial) exten => s,3,DigitTimeout,5 exten => s,4,ResponseTimeout,10 exten => _X,1,StopPlaytones exten => _X,2,Dial,Zap/g8/BYEXTENSION|10

Hi ! I've fetched a spare AVM B1 card from the cellar, and installed it. After "modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io

I went from asterisk 1.4.22 (which was working) to SVN and I am getting the message rejected because extension not found... How can I modify the print statement in chan_sip.c line 18388 to include not just the extension but the context its trying to find my extension in??? ast_log(LOG_NOTICE, "Call from '%s' to extension"

Dear, I am getting this in CLI on release candidate version of Asterisk. Any ideas, or points where to look? -- Launched AGI Script /var/lib/asterisk/agi-bin/rad-auth.agi [Oct 22 18:21:45] ERROR[9853]: utils.c:1126 ast_carefulwrite: write() returned error: Broken pipe -- <SIP/916-fc001968>AGI Script rad-auth.agi completed, returning 0 Best regards, Josip

Hi Shakeel, I had the same problem building app_swift (1.6..) myself and searched the web far-and-wide for a solution. I eventually contacted Darren Sessions -- who was maintaining that plug-in -- about a month ago. He was involved in another project and said he might be able get to it after a few weeks. But, since then, his website http://www.darrensessions.com/ has gone out of comission. I

Hello, I created a new application for myself called Dialtone() by modifing res/res_indications.c file. It can be used as such: exten => s,4,Dialtone(30|${CALLERIDNUM}) exten => s,5,Playback(time-exceeded) exten => s,6,Goto(s|1) It will stutter if you have new voicemail and you have passed the mailbox number as I did above. It will stop dialtone the moment you press a key

Hello, My configuration is : Card 0 - kernel dummy sound card Card 1 - my soundcard I have a jackd running in background. My jackd launch command is : jackd --port-max 16 --realtime --no-mlock -d alsa --playback hw:1,0 --capture hw:1,0 --rate 8000 --period 1024 --shorts --inchannels 2 --outchannels 2 --dither triangular & 1 ) I open asterisk with chan_alsa.so connected (with asoundrc) to

With app_swift 1.6.2 + asterisk 1.6.1.12, I've found that if you enter DTMF during cepstral playback, the first digit of ${SWIFT_DTMF} is [un]set in an odd way. for example consider: 999,1,Swift(some long message that you dont want to wait for|5000|5) 999,n,NoOp(DTMF: ${SWIFT_DTMF}) if while I am listening to the playback, i interrupt and dial: - "12345", SWIFT_DTMF is set to

hi! anyone try siemens optipoint 400 economy SIP phone with * ? -- http://www.siemens.com/Daten/siecom/HQ/ICN/Internet/Enterprise_Networks/WORKAREA/skuch_c/templatedata/English/document/binary/a31002-h1000-a250-2-7629.pdf Thomas

If anyone is interested ... just in case! :-)... I have tried to write , based on the cdr_mysql.so module, an Sybase module. To compile you can use something like that: export SYBPLATFORM=linux export SYBASE=/opt/sybase cc -I$SYBASE/include -c -o cdr_sybase.o cdr_sybase.c cc -shared -Xlinker -x -o cdr_sybase.so cdr_sybase.o -lsybdb -lm -L$SYBASE/lib (anyone could write the corect Makefile

Feature request: - Please add a new LogLevel corresponding to the LOG_NOTICE syslog level. - Then modify OpenSSH to log to LOG_NOTICE only these events: - login failures - login successes Specifically, please: - add a new element to the LogLevel enum, say, 'SYSLOG_LEVEL_NOTICE', between 'SYSLOG_LEVEL_INFO' and 'SYSLOG_LEVEL_ERROR', in log.h -

On Jul 2, 2013, at 5:16 PM, Kjell Claesson wrote: >> I hope other people can also test this. >> >> Regards >> Alf Hogemark > > Due to some crashes on the disks and lack of time I don't have the git on the > pc now. But maybe some other can commit this. I'd like to ask people to specifically try the bcmxcp branch on GitHub - it includes some changes

I was trying to convert a vector of POSIXct into a list of POSIXct, However, I had a problem that I wanted to share with you. Works fine with, say, numeric: > v = c(1, 2, 3) > v [1] 1 2 3 > str(v) ?num [1:3] 1 2 3 > l = as.vector(v, mode="list") > l [[1]] [1] 1 [[2]] [1] 2 [[3]] [1] 3 > str(l) List of 3 ?$ : num 1 ?$ : num 2 ?$ : num 3 If you try it with POSIXct,

Since www.bkw.org seems not to exist anymore (getting response from some hosting provider), does anyone happend to have a copy of app_valetparking.c from www.bkw.org - the one that should work with * stable 1.0.X ? If so please contact me. One that can be downloaded from www.loligo.com dosn't compile with 1.0.X, and SuperValletParking (www.asterlink.com/svp/) seems to be for * HEAD

Nope ! This is the one that tries to include PRE 1.0.X header file <parking.h>. It cannot compile on * 1.0.X (I have tried also to include <features.h> instead of <parking.h> (as far as I know features.h is successor to parking.h), but still without results). Thanks anyway. Nenad > > Try this > >> Since www.bkw.org seems not to exist anymore (getting