Displaying 20 results from an estimated 2000 matches similar to: "chan_capi-cm and type of number problem (ToN)"
2006 Dec 07
1
eicon diva BRI problems
Hi (Armin?) !
Today I had a problem with Diva Server 4BRI-8M 2.0.
Asterisk 1.2.12.1
chan_capi-cm-0.6.5
divas4linux-melware-3.0.f-106.622-1
Asterisk could not receive and make calls on the BRI ports, although the
ports looked fine within Asterisk.
I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line
activity. This time there was no activity (cryptic log
2005 Jun 28
1
problems with chan_capi 0.3.5 , divactrl, eicon diva server, and kernel 2.6.10/2.6.12
Hello all,
I'm having problems getting chan_capi 0.3.5 to work well with an Eicon
Diva Server card using using the driver from linux kernel both 2.6.10
and 2.6.12 (vanilla versions).
I have a (really two) producci?n system(s) running chan_capi in another
identical Eicon Card using kernel 2.4.27 and the Diva Server drivers
from Eicon. I installed an compiled the source level rpm
2006 Jan 16
1
chan_capi-cm and DID
Hi all,
i have asterisk 1.0.9 with an Eicon Diva 4bri and
chan_capi-cm-0.6. I have 2 NTBAs (one with did and one
without).
When using the one without did, i am able to place
outgoing and incoming calls. When i use the NTBAs with
did i have a layer 2 error.
Anyone an idea?
-- Executing Dial("SIP/2004-9634",
"CAPI/g1/43XXXXXX") in new stack
> data = g1/43XXXXXX
2003 Aug 14
1
chan_capi in the US
For those that are using chan_capi in the US, how do you have your line
provisioned (ordering code)? Are you using CACH EKTS?
thanks!
--Justin
2003 Nov 09
1
chan_capi & Eicon Diva problem
Hello,
I have an issue getting the chan_capi module to load in asterisk cvs
from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva
Server Bri card.
I load the modules with: modprobe -v divas divacapi
I load the firmware with: divactrl load -c 1 -f ETSI -vd6
Output in /var/log/messages is:
Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table
(http://www.melware.net)
Nov 9
2005 Dec 30
3
using a Gigaset SX440isdn on a Diva 4BRI ?
Hello,
I just received a couple SX440isdn phones and was wondering if they can
be plugged into a Diva 4BRI port in NT mode and work with
asterisk+chan_capi?
I know they probably work fine with mutliHFC cards with either bristuff
of chan_misdn but since I have some spare Divas, I was curious about
their potential as phone ports.
The Diva's 3 and 4 ports are already set to NT mode at boot
2005 Oct 02
3
[Sorta OT] Eicon DIVA with asterisk@home
Hi;
I've got an AAH installation where a customer wants to install an active
Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at
kernel 2.4.21.37. Support for Eicon active cards is built-in.
I've debugged and run the A@H install-Eicondiva script but when I try to
run divactrl load -c 1 -f ETSI -Debug I get a response :
A: can't get card type for DIVA adapter
2006 Feb 01
1
RE: Euro-ISDN
asterisk-users-request@lists.digium.com is believed to have said:
>chan_capi does not set the NT-mode. Your cards driver need to do that.
>E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl
>or set NT-mode in the config wizard.
>chan_capi does not (need) to know anything about what protocol the card is
>doing. CAPI is independent here.
Ok.
2005 May 06
1
CAPI on ptp with variable length digits in phonenumber: SOLUTION for EICON
Hello!
I finally found a working solution.
calling
divactrl with the parameter -n [0..20] gives the DID-length
means, if you wanna have 123-XXX in digit-wise mode, then call
divactrl load -c 1 -n 3 -f ETSI
and the card will wait for n digits.
regards,
Sebastian
-----Urspr?ngliche Nachricht-----
Von: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]
2005 Sep 23
1
chan_capi-cm-0.6: hangup is detected really late
Hi,
the following szenario leads to a problem:
I connect an CAPI channel to an AGI-Script per Manager API. This Agi
script starts the MeetMe-Application. The Person on the Capi Channel is
now able to speak with the other conferess in the MeetMe-Room. But if
the CAPI channel hangs up, the busy tone is streamed into the MeetMe
Room for several seconds, until the CAPI HANGUP-Signal is finally
2006 Mar 15
1
AVM C2 chan_capi-cm-0.6.3 Error on Dial
I'm getting a strange error on one of the two controllers on an AVM C2
card under chan_capi-cm-0.6.3.
I have two ISDN controllers defined, both in the same group, both
connections are UK ISDN2e Point to Point:
On the third outbound call (both of the first two calls are handled by
the second controller "ISDN2",) I get this error :
chan_capi.c conf_error 0x2001 PLCI=0x301
2006 Feb 23
1
chan_capi-cm 0.6.4 random outgoing MSN problem
I've having a big problem after having upgraded to 1.2.4 and
chan_capi-cm 0.6.4
When making outgoing calls I don't seem to have any control over the CLI
that is presented to the called party -- it can be any one of the MSNs
allocated to the line, allocated on what seems to be a random basis.
This is on a BT Business Highway line (which is essentially an ISDN2e
line with two built-in
2003 Sep 14
6
chan_capi
Hi chan_capi users,
this thing is awesome, no delays like in modem_i4l!
Plus, it got those nice ISDN features.
Here's my question:
Does my service provider (Deutsche Telekom) have to provide me with
these Services (CD, ECT)?
(the Readme in 0.2.5 says "does not relay on service CD")
I know, that I don't have CFU,CFNR,CFBS (which I would have to order
seperately).
How likely
2006 Apr 21
7
some EICON Diva 4BRI questions
Hi!
I have some (short) question about the Eicon DIVA (V-)4BRI cards I want
to have (short) answered before buying the DIVA card. I know there are
several Eicon guys active on the list, thus I ask on the list instead of
directly to Eicon so that all other will benefit as well.
1. Do Eicon DIVA (V-)4BRI cards support TE and NT mode?
2. Can the clock (master/slave) be configured independent
2006 Feb 11
4
Problem with Wait() and chan_capi-cm?
Hi!
I am playing around with Asterisk and have a problem :-)
(Asterisk-version: 1.2.4, chan_capi-cm-version: 0.6.4)
I have a sip-phone at my desk and an ISDN-phone (independent of the
Asterisk-server) in my living room, when I'm not at my desk, the
sip-phone is switched off. I would like to be able to accept calls at
both phones (when available) and have Voicemail kick in if I don't
2005 Sep 28
2
chan_capi-cm, Euro ISDN bus: 2 extensions on same BRI port not working
Hello,
I am using a system with an AVM ISDN PCI card (fcpci) and asterisk with
chan_capi-cm-0.6. The hardware is connected to a Siemens Hipath 3550 PBX. As
a BRI connection has 2 channels and allows 2 simultaneous calls,
numbers/MSNs 6391 and 6392 were for provisioned for each channel. The system
is working (partly, read on), the trick is the correct cable wiring and
setup the PBX's port
2005 Aug 18
2
segfault with chan_capi-cm 0.5.4
Hello all,
i am using * 1.0.9 and chan_capi-cm 0.5.4. So far everything works good.
But if i want to initiate an call over an capi channel either from the
manager api or from an call file * quits with an segfault. If i do the
same thing over sip channels everything works perfectly. Had anyone the
same problem? I am using Linux Kernel 2.4.27 and an Fritz!PCI v2.0 Card.
Thx in advance :)
2005 Jun 16
9
chan_capi-cm-0.5 release announcement
Hi all,
I would like to announce the first release of the chan_capi
channel driver on sourceforge.net
The package is available for download with name
chan_capi-cm-0.5
and is the current CVS HEAD.
It is derived from the chan_capi-0.4.0PRE1 of kapejod.
The main changes are:
- complete rework
- fix race-conditions
- fix call state handling
- rework of debug/verbose messages
- added capiFax
2006 Jan 13
2
PrimuX Cards with chan_capi-cm
Hello List,
I'm trying to get a PrimuX Card (www.primuxisdn.de) working. The
Manufacturer says that chan_capi (the older one) used to work.
Now I'm trying with chan_capi-cm and have got the following problems:
Outgoing calls "ausgehend_ueber_ntba_primux.txt" the other phone rings
but when I answer the call asterisk crashes.
Incoming: first tried with immediate=no
2005 Sep 03
1
chan_capi [0.4.0|-cm-0.5.4] and Asterisk 1.2.0-beta1 - early B3 not early enough sometimes
Hi,
I've just installed Asterisk 1.2.0-beta1 for the first time and downloaded
chan_capi and compiled it in and run it. (For comparison purposes, I've
tried this with both chan_capi-0.4.0PRE1 and chan_capi-cm-0.5.4 and
chan_capi-cm latest CVS). Whilst most things are fine, it seems that if I
specify the 'b' parameter in the dial string before the number, sometimes
the early