similar to: TDM400P static on call

Hi, I have just built my home Asterisk box into a better PC that became available (still only a P2 350 but it only has to manage 1 analog line).. Anyway I have built it on Fedora Core 1.. I have an X100P and a TDM400P (1 module installed).. These cards were working fine in my older PC that was running my Asterisk at home.. The inbound calls via the X100P to my sip phones are working great..

Hello list... 1) Is there an IAX softphone that supports any kind of voicemail indicator? 2) I have 2 TDM400Ps installed in a system. I need the audio on the analog phone (FXS modules) to be amplified somewhere between 10 and 15db so I set rxgain and txgain to 15 for the FXO interfaces and FXS interfaces. When a call comes in on the FXO at this setting, the call sometimes has about 20 seconds of

Hi, I had ordered a TDM40B and developers kit a few months ago. I have everything installed and working, with one exception - sound quality. When placing a call it sounds like a very bad cordless phone - lots of hiss / static in the background. This even happens with the dialtone, though it is much worse one the call is connected. This does not occur when the phone is directly connected to the

Hi, I have got a hissing/humming noise on my handset that is connected to the S100U USB device.. I was running a CVS version of * that was about 2 to 3 weeks old and had perfect quality.. But that HDD died on me so I reinstalled and used the latest CVS, now I have this sound that is best describes as a similar sound to the noise a cpu fan makes.. Like a high piched hissing noise.. Any one

I have an X100p card....and it is hard to hear the person on the other end. Should I mess with these values? I have heard both yes and no to this question in the past. If yes, how much louder should I make them? Thanks, MIchael

Sip to sip calls are fine, both local on Asterisk and over a SIP gateway, however some people who call on the PSTN line say we are very queit and vice versa, can the volume be turned up on the PSTN line? The volume buttons on the VoIP phones only turns up the others voice, so this is a fix for us, but how do I make our voices louder for the people on the PSTN line? Thanks. Paul.

Has anyone got a sensible zaptel.conf and zapata.conf for 2 TDM400P's working with UK set-up. They're set-up with 7 analogue phones and 1 PSTN port. Currently zaptel.conf has fxoks=1-7 fxsks=8 loadzone=uk defaultzone=uk It's really zapata.conf that would be useful. Currently using the zaptel/asterisk that comes with Ubuntu (latest) which needed a bit of tweaking (1.2.16), but could

I have a bad echo problem on my TDM400P with one FXO module installed. I have tried a few things, such as: * setting rxgain and txgain to 0 * setting echocancelwhenbridged to no / yes * settting echocancel to 64 / no / yes * setting echocanceltraining to 800 / no / yes * MG2 echo cancellation * MARK2 echo cancellation * KB1 echo cancellation * AGGRESSIVE_SUPPRESSOR option of MARK2 Each time

We are trying to determine how to build out an IVR system we are working on. The system needs to be able to handle probably at most 5-10 concurrent calls at peak times. Other times we are just looking for a reliable service. For incoming calls we've been using BroadVoice VOIP and before that VoicePulse VOIP. VoicePulse's IAX service started dropping DTMF inputs that we were processing

I have an intermittent problem with the one FXS line that I have. On most calls, the first ~5 seconds of the call has a loud buzzing noise on the line. After 5 seconds or so, it fades off to nothing, and the sound quality is great. Searching for "buzzing" on the list doesn't give a whole lot to work with. The buzzing happens on calls that are routed over both my FXO line and

Hello, I sent a wav-audio to Asterisk though SIP and ISDN channels and recorded it in wav-audio at the Asterisk server. I found the loudness level of the recorded audio was too high comparing with the orginal audio. How can I ajust it, so that there will be no amplifier used for recording. Thanks a lot. best regards Felix -------------- next part -------------- An HTML attachment was

Hi there, i called one asterisk server from another asterisk server. The calling server played back a audio data und the answering server recorded the audio sample using record() function. I tried both ISDN, VoIP connections. Camparing with the original audio data, the recorded samples from both connections were amplified by asterisk, so that the recording were much louder. But I didn't

Hi, Does any one have any pointers on improving moh quality?? Symptoms are crackling and hissing as the sound comes and goes.. I installed mpg123 this morning.. I have tried various MP3's sampled at 160k, 128k, 32k and 8k and they all sounded terrible... The PC is a P4 so its got plenty of processing power.. I have tried a few different types of classical music (Piano, Violin and full

I've been searching the forums and on the list to see if this has been addressed. If it has, could someone point me to the thread to fix or at least acknowledge it is an issue and what is causing it. Posting to the list was last resort as I couldn't find a solution anywhere else. Setup: Asterisk@Home 1.3 (this is my first system, so path of least resistance) Digium TDM400P (2 FXS on ports

Below is a copy of my log, zapata.conf & extensions.conf that relate to the ZAP lines. Basically when we dial out it takes on 10-12 seconds before the ZAP line actaully picks up. I'm hoping to find out what the cause is for this as it's causing user grief with extremely long connect times, and I believe it may be causing issues of cross lines (an outgoing call gets mixed with an

I am trying to place an analog outbound call from a Sipura SPA-841 through a * server with a TDM400P and 4 FXO's. When I call in from an analog line everything works fine, I can talk over the SIP phone. When I call out, * says: == Spawn extension (from-sip, [phonenumber], 1) exited non-zero on 'SIP/sipphone-d29d' -- Executing Dial("SIP/sipphone-9eb0",

Greetings everyone, I am attempting to adjust the volume of a call using Set(VOLUME) in my extensions.conf file. I am finding that Set(VOLUME(TX)=x) and Set(VOLUME(RX)=y) have no discernable effect on my endpoints (Snom 300 IP phones). I have tried setting x and y to -30, -10, -3, -2, -1, 0, 1, 2, 3, 4, 10, and 100 and there appears to be no change on the phone volume. I can see that the

I've tried to google this issue with no resolution. I'm having the same issue as this person: http://lists.digium.com/pipermail/asterisk-users/2004-August/058280.html Basically, anytime I try to dial out on my TDM400P w/ FXO, I get "we're sorry, but your call cannot be completed as dialed." When I "debug channel Zap/x-x", I get a whole bunch of this: [ TYPE:

Hellow everyone, here's an other newby question. I've got a * configured with the card in the subject line. At times Asterisk fails to notice a disconet from the incoming line going into one of the FXO ports. Consequently it just keeps the line off-hook for ever and that causes my provider to mark the line aut of order. Is there any way to "help" Asterisk notice the disconect?

This may be commonly known but I haven't come across it so here goes, maybe it'll help someone: I have terrible echo with asterisk 1.2, zaptel 1.2.12, and a TDM400P with 1 FXS and two FXO modules. The Mark2 echo canceller with Aggressive turned on was the only setting that would make it acceptable. I found fxotune with this zaptel version to be broken. I pulled the latest fxotune.c