similar to: Configuring utstarcom1000 on asterisk

Hi folks! Based upon your experience on the field what wifi sip phone would you reccomend ? A customer asked for a wireless * install and I'm looking for advice, tnx Alessio Focardi [[*] - Interconnessioni Italy -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060628/05b2fb30/attachment.htm

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

I bought a UTStarcom F1000 WiFi IP Phone from http://www.luxoncomm.com and tested it with Asterisk. This is a my first impression of the device. The F1000 supports SIP. It looks and operates like a cell phone, and connects to the Internet through WiFi, so you can use it at any WiFi hotspot. I set up a 802.11b wi-fi network with a Linksys BEFW11S4 Wireless-B broadband router with no security

Does anybody use UTStarcom F1000G Wi-FI VoIP phone? http://www.utstar.com/Solutions/Handsets/WiFi/ I'm planning to buy one and I need to know did you have any problems with phone. What is the sound quality? How close you need to be to the access point? Please, any information's are useful to me. -- Tomislav Parcina tparcina#lama.hr

Hi there, I am trying desperatly to register my WiFi Phone UTStarcomm F1000 with my asterisk server. I already changed the name of the user to "anonymous" since it looks like the phone sends that name. The WiFi Phone's IP is 192.168.1.217, the asterisk server's IP is 192.168.1.200 What is it that I am missing? Any help very much appreciated!!! The error message I get is: Jan

Hello, When I run a "df -i" in my clients I get 95% indes used or 5% inodes free: Filesystem Inodes IUsed IFree IUse% Mounted on lustre-mds-01:lustre-mds-02:/cetafs 22200087 20949839 1250248 95% /mnt/data But if I run lfs df -i i get: UUID Inodes IUsed IFree I

Hi, I am new here on this list, and have a problem of which I hope that somebody here can help me with it. I have a Voipbuster account, with which I would like to make phone calls via my Asterisk PBX. If I let X-Lite register directly at voipbuster.com, everything is OK, but if I let Asterisk register there, it says "registration for XXXXXX@sip.voipbuster.com timed out, trying again",

I'm about to start working with WiFi phones on my Asterisk installations. Can anyone tell me if they are using WiFi phones on wireless network that is extended with WDS and how well the phone handles jumping from access point to access point while on a call? Do any WiFi phones support WPA encryption or are they all still under the impression they are only being used on public hot spots?

Hello list, I was going to buy this weekend a Wisip from http://www.pulverinnovations.com/, but jeff got out of stock and he wont have Wisip for the next 3 to 4 weeks. So I start searching for other wifi phones because I was really upset about it and I found IPC5000 from http://www.fahdtel.com/sip_phones.htm, I liked so much the pic that I email the guy and he send me the PDF with all the details

Has anyone had any luck configuring the UTStarCom F1000 with asterisk? I get the wireless to work but the sip registration is a problem. Below is my SIP Debug. The server is 192.168.0.80 and the phone is 192.168.0.166. Sip.conf: [f1000_1] type=friend host=dynamic defaultip=192.168.0.166 port=5060 secret=mysecret ;auth=md5 username=f1000_1 qualify=yes

All, has anyone any experience in using Wifi smartphones as SIP clients? Does this work properly? What models/brands are optimal for this (in terms of ease of use, battery life etc)? Thx!! B.

Hello everybody, I was installed a lot of PDC under Linux Debian, here in my country, but i have a requirement from a client who wish to install a Primary Domain Controller with at least 30 Windows NT Backup domain controllers in all regions of his organization. I'll like to know if it is possible and where i find more information about a possible solution for this. Best Regards to all in

Hello to all. I’m new to Xen and virtualization. We are a small business, with up to 10 users. In order to reduce our TCO, I’m thinking on installing virtual machines to cut down costs and maintenance. 1) A 10/100/1000 network to which 1 virtual machine server attached 2) The different virtual server to run in it are : a. MS Windows 2003/2008 Domain controller, DHCP and

We're getting our feet more and more wet with VOIP at work. We want to experiment with a good wireless (as in WiFi) phone. What would be a good phone to impress my boss with? I'm personally drooling over the UTStarcom F3000, but compatibility and shipping ETA info is a bit sketchy. Phil

Hello! I can't compile rtmpdump source on FreeBSD: http://sourceforge.net/projects/rtmpdump/ I obtain the following output: # gmake g++ -Wall -c -o bytes.o bytes.cpp In file included from bytes.cpp:25: bytes.h:37:20: endian.h: No such file or directory bytes.h:38:22: byteswap.h: No such file or directory bytes.h:45:2: #error "Undefined byte and float word order!" bytes.cpp:

Hi, after upgrading to 3.10.9 I'm seing ganesha.nfsd segfaulting all the time: [12407.918249] ganesha.nfsd[38104]: segfault at 0 ip 00007f872425fb00 sp 00007f867cefe5d0 error 4 in libglusterfs.so.0.0.1[7f8724223000+f1000] [12693.119259] ganesha.nfsd[3610]: segfault at 0 ip 00007f716d8f5b00 sp 00007f71367e15d0 error 4 in libglusterfs.so.0.0.1[7f716d8b9000+f1000] [14531.582667]

R experts, I have three columns. c1 and c2 are numeric variables whereas c3 are the clusters classes (nominal variable, 10 different: cluster1, cluster2, cluster3, cluster4, cluster5 ....). I'd like to plot c1 against c2 (easy!) in a 2D plot and put different color depending to the cluster class automatically regardless the number of clusters. Could anyone give a hand? Josep Maria, matrix

Dear all, I wonder which R algorithm could perform a mountain clustering in an spatial grid, in other words, having the coordinates of a map (x,y ... or even more) and then the altitude/height at each point I would like to localise the peaks of that topological surface. Which R algorithm can perform this? I see it as a clustering problem where the peak should be at the center of each cluster.

Hello all, I've tried to reproduce the contour plot that appears in the book of Venables and Ripley, at page 255. Is a F-statistic surface and a confidence region for the regression parameters of a non-linear model. It uses the stormer data that are in the MASS package. I haven't been able to reproduce the plot either in R ( version 1.5 ) and S. It makes the axes and it puts the

Dear All, I'd like to use Weka functions that are not implemented (do not have interface) in RWeka, like the Remove function and others in the future! The .java() functionality is for that purpose but I haven't seen any example with Weka functions. Could anyone give me hand in how to do it? For instace if I want to use the weka.filters.unsupervised.attribute.Remove? 1. in the R console,