similar to: Most comprehensive management?

http://grandstream.com/BETATEST/HT488_496_386/

I am looking to setup paging using the auto answer feature on the Grandstream GXP2000. I am thinking I will follow the method as described here: http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+page I will setup the 4th account on the phone to auto answer. Does anyone else have a method that works better? I also looked at the allpage AGI written on Voip-Info. But it seems

We've been running an Asterisk-based phone system here in our office for a year and a half, and it's pretty much been running smoothly. One employee who works out of the office has a problem that she can't make outgoing calls on a temporary basis every so often (a few times a day). No one else has this problem, her settings are fine, and she regains the capability spontaneously with no

Figuring I knew what I was doing (I didn't - surprise) I added a totally unnecessary line in /etc/asterisk/extensions_additional.conf a couple of days ago. Troubleshooting a dialing rule issue, I'm now realizing that FreePBX is updating its database with the new settings but is not rewriting/updating extensions_additional.conf with the changes I'm making. I've tried renaming the

Hi all, We use AAH to run our office telecoms registered with two Sipgate accounts. Today, Sipgate appeared to have had problems with their server with oneway audio on every call. In order to cause the Sipgate message service to pick up in stead of our AAH box, I simply unplugged the network cable. We now have problems where AAH does not seem to access the network. I plugged the network cable

Does anyone know if FreePBX can be installed on a Linux box that was built using Asterisk@Home. I would prefer to manage Asterisk with FreePBX over the AAH build. I have just not had good luck building an Asterisk system from scratch and the Centos based Amp ISO and prebuilt config files are a wonderful place to start. Nothing against Asterisk or Linux. My build from scratch issues are only

Hi All, I have installed Asterisk 1.2.10 on Fedora 5. I have installed Asterisk Management Portal (AMP) for web interface. After installing properly when opening in the webpage it is not parsing the index.php for the AMP. My Database is MySQL.and web server is Apache 2.2. Please let me know is this configuration problem or this is the problem with Apache (Apache 2.2) . Thanks

Not sure what's up with the mailing list here. For some reason mails are not coming through. Try again... I am trying to link an asterisk box to my provider's asterisk server via SIP. (I know I could use IAX, but the provider does not allow that, so I can't). When an inbound call happens I get this: Jan 31 13:09:14 NOTICE[3716] chan_sip.c: Failed to authenticate user

Having trouble running make on res_perl: [root@charlie res_perl]# make perl -MExtUtils::Embed -e xsinit gcc -Wall -fPIC -DHAVE_AST_CUST_CONFIG -I/usr/src/asterisk-1.0.9/ -I/usr/src/asterisk-1.0.9//include -I. -DAST_INSTALL_PREFIX=\"\" -DASTETCDIR=\"/etc/asterisk\" -DASTLIBDIR=\"/usr/lib/asterisk \"-DASTVARLIBDIR=\"/var/lib/asterisk\"

Would like some advice on the best way to route DID's to remote asterisk servers. Currently I have multiple DID's on my main Asterisk server in a datacenter and have remote servers that connect via an IAX trunk and when a call comes into my server I pass it to the iax peer. Just wondering what the best way it is to do this without having to have multiple line contexts for each remote

Hi all, At our customer site i've installed one asterisk server with 20 Grandstream GXP2000's. Firmware 1.0.1.9. When someone dials the customer, the receptionist picks up, and does an attended transfer (the 'grandstream way') to a collegue. Most of the times this goes ok, but sometimes, when the receptionist puts the call on hold, and tries te reconnect to the caller there's

I migrated to a new version of the voip connection vs1 server software and I am now getting these errors when I try to call my voicemail. Any thoughts? The files are there, so I don't get it. Oct 11 19:57:26 WARNING[6587]: format_wav.c:140 check_header: Not a wav file 49 Oct 11 19:57:26 WARNING[6587]: file.c:418 ast_filehelper: Unable to open fd on

Hi, I have "callwaiting=yes" in my zapata.conf, and "Call Waiting Serv: Yes" in the PAP2s. However, there's sitll no callwaiting on the PAP2s. Everything else work fine. Any ideas? Am I missing something somewhere? Thank you. AK -------------- next part -------------- An HTML attachment was scrubbed... URL:

Has anyone had success sending faxes via a broadvoice byod account? Everything 'looks' to go as expected, but then my fax hangs up and I get a printout with Error 351. I am wondering if it is a codec issue or something. Any help will be great. Neri -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I'm trying to set up Asterisk behind my WRT54GP2 router that has a intergrated ATA box. My box are not locked in any way so I can access and change all settings. Now to the problem... I have gotten Asterisk to register with my provider and everything works just well.. Now it's time to get the intergrated ATA to connect to asterisk. But the asterisk box in located on the LAN ports of

Hi All, I'm looking for a good voip hardphone that has a decent set of the "regular" features (conference, 2 lines, etc) thats reliable, has decent quality, and isn't too pricey. Does anyone have any suggestions? Thanks in advance. Derek -- Derek Fedel

I am getting a TON of these errors on the console. I Googled and wikied and greped found the error in the source but cannot understand why it is happening. The system works fine, no dropped calls, no echo, it will even run for weeks with this error. But it just scrolls and scrolls on the console. Temporary fix was to turn off the console monitor! :-) Any ideas. Apr 16 10:40:12

Anyone have any luck RMAing a Sipura phone since the Cisco take over? Sipura only has support via email or fax to end users and I haven't gotten a response to either for over 2 months. Linksys Support will jump you through all their scripted hoops to resolve your problem (they hope if they speak with a thick enough accent and make repeat the same steps over and over again that you will just

Which models of Diva could work with CAPI and asterisk? Thanks Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di gw@adcomcorp.com Inviato: sabato 1 ottobre 2005 23.46 A: asterisk-users@lists.digium.com Oggetto: RE: [Asterisk-Users] Diva Nope. At least I tried and never could get it

Hi, sorry for the long debug output below. I configured Asterisk with AMP to send the whole number including the extensions of the callers to the called party. Whatever I configure in AMP it looks like it is used, In my eyes it is ok, but doesn't seem to work. 033811234451 is the call id i configured, and it seems to use them, but the caller will only see a 0338189040 instead of my